New Product Gallery
New Product Gallery
Return to June VITA Journal Table of Contents
Return to VITA Homepage
CSPI has announced a new VMEbus platform that allows users to seamlessly incorporate off-the-shelf PCI Mezzanine Card (PMC) hardware modules and VxWorks software drivers in a DSP and RISC multiprocessing environment. Controlled by an onboard Motorola PowerPC RISC processor, CSPI's MAP-1000 introduces a 1 GFLOPS system-level environment for integrating standard floating-point 21060 DSPs from Analog Devices and special-function PMC modules. Because of the rapid industry-wide growth in the availability of PMC products, the MAP-1000 allows developers to quickly construct systems that are performance- and cost-optimized for a variety of markets including classic DSP applications, front-end sonar and radar processing, and PMC-based COTS designs. Show a photo. For more information contact: CSPI at 800-325-3110.
Cyclone Microsystems has introduced the CVME965, a new Single Board Computer optimized for intelligent l/O, communications and data acquisition applications. The CVME965 features a unique dual memory architecture which eliminates bottlenecking or processor starve out common to high speed, embedded I/O systems. This architecture allocates a private memory for the processor and a global or packet memory for the I/O devices and processor to share. In addition, the CVME965 features the i960HD66® Superscalar RISC microprocessor and two Squall II Module positions for intensive I/O operations. As a result, Cyclone's CVME965 provides increased throughput and optimum performance for high speed real time/embedded systems. The i960HD microprocessor performs context switching and interrupt servicing with very low latency and features register stack, scratch pad memory and instruction cache to increase performance and reduce the processor's need for the shared memory. The CVME965's private memory is configured of hyper page mode (EDO) DRAM, allowing burst accesses such as instruction fetches and stack operations to access data on every clock cycle. Accesses to the private memory can proceed at a sustained rate of 66 Mbytes/second. Show a Photo. For more information on the CVME965 or other Cyclone products, please contact Peter H. Zackin, Vice President of Sales at 203 786-5536, info@cyclone.com or http://www.cyclone.com.
Digital Equipment Corporation has announced the availability of a new family of Digital Alpha VME single board computers (SBCs) based on the 21064A Alpha microprocessor. This new family of boards, the Digital Alpha VME 4/224 and 4/288, extends the capabilities of the Alpha VME family to a new level of performance - offering double the CPU performance of Digital's existing AXPvme 230 board. The Digital Alpha VME 4/224 and 4/288 boards are available in two CPU speed variants, 224 MHz and 288 MHz, and have been engineered to meet the increasingly demanding requirements of the embedded and realtime markets. The Alpha VME 4/288 SBC has been estimated to deliver over 200 SPECint92 and over 250 SPECfp92. With this product family, OEM customers gain the reliability and performance found in the AlphaServer and AlphaStation systems in the form factor of a 6Uxl60mm VME module. Contact Digital Equipment Corporation at 1- 800- AXP- 4VME.
DY 4 Systems, is releasing its most sophisticated real time signal processing module to date. The Quad 'C40-based DSP card permits a wide variety of interface options to be implemented. The board, designated: model SVME/DMV-443 Quad 320C40 is fashioned after DY 4's proven predecessor, the SVME/DMV-442, the '443 is a real-time signal processing module. An important feature of this card is its programmable front-end which allows it to directly adapt to many sensor interfaces. This enhancement can eliminate costly and inconvenient custom interface boards that would otherwise be needed to translate sensor data for the DSP input. The '443 is designed first and foremost for performance. The programmable interface may be used to perform hardware pre-processing to off-load the DSP's. The board provides 50 MHz operation, zero wait-state memory, the industry's fastest external comm port implementation, and sustained VME performance of better than 40MB/s. Show a Photo.
For more information please contact: Ian Stalker, Product Manager Tel: (613)-596-9911
EKF announces the VMEbus V380-PCA PC Card adapter available with several new OS-9 (Microware) drivers. Now also supported are Modems (a/b or ISDN type), new hard disk models and flash PC Cards. Widely accepted as a standard for PCs, the (formerly named PCMCIA/Jedia) PC Card interface has been established for industrial purposes on the VMEbus. This is mainly because PC Cards open a simple way of data transfer between any type of computer system.
With its new improved design the EKF V380-PCA allows insertion of all chipcards type I-III, including the most interesting new ATA compatible devices (ATA-Harddisk, ATA-Flash, SunDisk). The enhanced software package delivered with the V380-PCA board contains OS-9 drivers and utilities, and (besides the OS-9 filesystem) allows reading, formatting and writing of DOS compatible filesystems (FAT type). Show a Photo. Contact EKF Elektronik GmbH, Philipp-Reis-Str. 4, D-59065 Hamm Germany Tel. ++49 (0)2381 6890 0, Fax t+49 (0)2381 6890 90, E-Mail: info@ekf.de, Internet http://www.ekf.de/.
GreenSpring Computers, the leading manufacturer of IndustryPack mezzanine modules, has announced the availability of high-density Differential I/O IndustryPacks in the Unified Digital family of products. The EIA-422 (formerly RS-422) level modules were created to offer a low-cost Differential I/O solution for commercial, military and industrial applications. Using up to four Differential I/O IPs, a single VME or AT slot can deliver up to 96 EIA-422 I/O lines.
For further information, contact GreenSpring Computers, 1204 O'Brien Drive, Menlo Park, CA 94025. Ph- (415) 327-1200, fax-(415) 327-3808, e-mail: sales@gspring.com, web: http://www.greenspring.com.
Heurikon Corp., announces PM/VSB, the first in a family of PMC (PCI Mezzanine Card) modules. The IEEE 1386.1-compatible, single-width module provides a 32-bit link between a VMEbus baseboard's PMC interface and the VSB bus. The module makes VSB signals externally available via the VMEbus P2 connector. PM/VSB's VSB master interface complies with IEC 822 and acts as a Slot 0 serial arbiter. The interface supports a bandwidth of 10 Mbyte/sec for single-cycle read operations and 15 Mbyte/sec for write and DMA read operations. All VSB configuration registers appear in PCI configuration space and can be mirrored in PCI I/O space. All VSB signals are routed to the baseboard's P2 connector via the PMC J4 connector. A VMEbus CPU board with an attached PM/VSB module occupies a single VMEbus slot. For more information, contact Heurikon Corporation, 8310 Excelsior Dr, Madison, WI 53717-1938. Phone: (608) 831-5500 or (800) 356-9602, Fax: (608) 831-4249. HomePage address: http://www. heurikon.com.
Heurikon Corp., announces BajaNet, a multiport VMEbus communication controller equipped with Ethernet and Fast Ethernet interfaces. Targeting high-speed switching systems like bridges and routers, BajaNet provides three ports, which may be configured for hybrid 10-Mbit/sec Ethernet and 100-Mbit/sec Fast Ethernet operation. BajaNet may also be configured with custom LAN and WAN interfaces. BajaNet's first port supports both IEEE 802.3 10-Mbit/sec Ethernet or 100-Mbit/sec Fast Ethernet operation. Implemented as a PMC mezzanine card, the port provides a single RJ45 connector, automatically sensing the type of incoming LAN data and switching to provide the appropriate physical interface. BajaNet's main controller is a 175 MHz IDT R4700 RISC CPU, which serves as a high-speed protocol processor and data mover. The R4700 features a 16-kbyte instruction cache, 16-kbyte data cache, and a 64-bit floating point unit. The controller is equipped with up to 64 Mbytes of onboard DRAM, which is used to support program execution and buffer incoming/outgoing network data. Software support for BajaNet includes the VxWorks real-time operating system. Support for pSOS is expected later in the year. For more information, contact Heurikon Corporation, 8310 Excelsior Dr., Madison, WI, (608) 831-5500 or (800) 356-9602, Fax: (608) 831- 4249. Email: info@heurikon.com, WWW: http://www.heurikon.com.
MATRIX Corporation announces two high-performance VMEbus processor boards based on the MC68040 microprocessor - the CPU540 and the CM-CPU-40. These CPU boards combine power, speed and reliability to meet the demands of the most intensive, high-capacity applications. The CPU540 is a 6U processor board designed for demanding control and communications intensive applications. It thrives in harsh environments and can operate over a wide temperature range, tolerating shock and vibration similar to Mil-SPEC products, but at a fraction of the cost. The CPU540 is a single-board system with an MC68040 main processor and two MC68360 processors for I/O management. Show a Photo.
For more information about the CPU540 and the CM-CPU-40, please contact us at: MATRIX Corporation, 1203 New Hope Road, Raleigh, NC 27610 USA; Phone: (800)848-2330 or (919)231-8000, Fax: (919)231-8001; E-mail: info@matrix.com.
MEN Mikro Elektronik GmbH announces the A4N VMEbus double Eurocard which is equally suited for application as an intelligent peripheral controller, single-master CPU and stand-alone CPU in the low-cost range. Its strengths are fast data acquisition and preprocessing of periphery signals, relieving the load on the VMEbus. The A4N has 3 M-Module slots of its own, and has direct control of 4 additional M-Module slots on an extension board with a 64-pin connector. The 20-MHz version of the MC68332 (CPU32) and 2 Mbytes of "genuine" dual-ported DRAM (0 wait states) turn the A4N more powerful than its predecessor A4. Supported by an internal RISC CPU, the periphery functions of the 68332 are used for integration of M-Modules. The TPU (Time Processor Unit) performs both simple and complex timing tasks, making it the latest advance in timer systems. Viewed as a special-purpose microcomputer (RISC CPU), this processor performs two operations, match and capture, on one operand: TIME. This advanced TPU offers high-resolution timing and multiple time function capability in the timer channels. Show a Photo.
The B4 VMEbus single Eurocard has the same functionality as the A4N. It offers one M-Module slot for I/O extensions and needs only one slot on the VMEbus. For more information, contact MEN at: +9 11/99 33 5-0.
Omnibyte Corporation an- nounces its newest product, the Galaxy PowerPC. The VMEbus-based single board computer is designed to address the needs of a cross section of users in aerospace, military, scientific, telecommunications and electronics industries for embedded systems applications which may require a graphical user interface (GUI). The Galaxy uses the PowerPC 604 processor, running at 100MHz and higher on an efficiently designed VMEbus single board computer. The Galaxy meets industry wide demand for performance, popularity and embeddability. The new board offers a smooth transition to the expected large CHRP/PR*P (Power PC Common Hardware Reference Platform) specification software base. The choice of operating systems for Galaxy users is broad. The Galaxy desktop version runs WindowsNT®, AIX® and Solaris®; the embedded version runs VxWorks® and OS-9®. Show a Photo. For more information, call 1-800-638-5022; or E-mail, sales@omnibyte.com; or WWW: http://www. omnibyte.com.
Pentek, Inc. announces a Peripheral Component Interconnect (PCI) mezzanine card (PMC) that incorporates its data transfer and digital signal processing (DSP) capabilities to the computing power of chips like the Alpha, Pentium, PowerPC, 68060, i960, R4000. Up to three PMC modules can be attached to any VMEbus baseboard equipped with a PMC interface to function as a co-processor to the processor on the baseboard. In addition, data can be transferred through the four 20 MB/sec 'C40 comm ports, which are directly compatible with Pentek 'C40 DSP boards and compatible peripherals including A/D and D/A converters, SCSI, taxi adapters, digital telecom and digital receivers. The Model 7110 PMC module incorporates a Texas Instruments TMS320C44 processor operating at 50 MHz with 512 kB of zero wait-state SRAM. Supporting full utilization of its dual bus architecture, the PMC module delivers 50 MFlops of processing power. U. S. Sales Contact: Mario Schiavone, Pentek, Inc., 55 Walnut Street, Norwood, NJ 07648; telephone 201-767-7100, ext. 711; fax 201-767-3994; email info@pentek.com. European Sales Contacts: VSystems S. A. in France at 39.55.0202; VSystems Electronic GmbH in Germany at 8-92-725306; VSystems A.S. in Norway at 22.10.18.52 or V Systems AB in Sweden at 8-26-65-20.
Pentek, Inc., introduces the fourth member of the multiple function A/D high-performance converter family for real-time process control applications. The Model 6109 features increased density and data channels, tighter feedback loops for high-performance VMEbus data acquisition, control and DSP applications. The Model 6109 features 8 Analog Devices A/D converters that provide 12-bit accuracy and maximum sampling rates up to 20 MHz. Digitized data is stored in eight independent FIFO memories, each 16k samples deep. Data can be delivered through either the VMEbus or through front-panel 'C40 comm ports. The Model 6109 is ideal for real-time process control applications where latency and loop delay must be minimized. As each sample is converted, it is immediately available to the interface with near-zero fall through time for the FIFO's. This provides a minimum delay between conversion and processing. Model 6109 supports PC, Sun and HP Platforms. Pentek develops, manufactures and markets worldwide innovative DSP systems to original equipment manufacturers, distributors and value-added resellers. U. S. Sales Contact: Mario Schiavone, Pentek, Inc., 55 Walnut Street, Norwood, NJ 07648; telephone 201-767-7100, ext. 712; fax 201-767-3994; email: news@pentek.com.
Phoenix International Systems, Inc., an ISO 9000 certified manufacturer, is now shipping the Phoenix "PHALANX" RAID system that is industry unique for uninterrupted operation. It can be used with any Platform or Workstation. This compact (10 x l5 x 12 inch) unit provides the most comprehensive set of features to be found on any RAID/Array system, all standard equipment. The only user options are: controller cache over 8MB (up to 256MB); and disk capacity (up to 51GB). In addition, the user may select any RAID level as needed with no software or drivers required - the system is transparent to any host OS.
For additional information contact Amos Deacon at Phoenix International headquarters, 812 W. Southern Ave., Orange, CA 92665-3224; Tel (714) 283-4800; FAX (714) 283-1169 e-mail: phenxint@ix.netcom.com; www.phenxint.com
Primagraphics, the Cambridge-based graphics and image processing specialist, has expanded its range of Varsity VME cards and systems to include a new video input module, the VIM-2. The 6U VME compatible card allows two asynchronous 256 level greyscale video signals of a variety of formats to be input in real-time into a Varsity system. The VIM-2 has two separate inputs with independent genlock available on each channel. Genlock can be achieved on both video cassette recorders and stable sources such as cameras.
The VIM-2 is a dual channel monochrome video frame grabber for Primagraphics' Varsity systems, that can be used to reduce bus traffic by performing real-time processing functions on the card itself. These functions include histogram equalization, as a means of improving image contrast, and hardware zoom up and down. Show a Photo.
Contact Nick Porter at Primagraphics Limited, Graphics Court, Melbourn Science Park, Melbourn, Herts SG8 6EJ, England. Tel: +44 (0) 1763 262551; Fax +44 (0) 1763 262551.
The development of a military expansion (MXbus) module which provides two dual-redundant MIL-STD-1553B interfaces, plus an 8-bit TTL parallel l/O port in a single VMEbus slot, has been announced by Radstone Technology. The new MX1553-2 is designed for use with latest generation SBCs that support the MXbus, including the complete range of Radstone 68040 and 68060 processor boards. The module is offered in five air- and conduction-cooled models to meet application needs from standard or development grade to severe environment to mission-critical.
To simplify system integration of the MX1553-2, Radstone supplies object libraries that provide full support for all 1553 modes. In addition, a suite of built-in test (BIT) firmware is included as standard. It provides diagnostics to confirm subsystem integrity at power-up, and the ability to interrogate the board from the host. Show a Photo.
For more information, contact Radstone Technology Corp., 50 Craig Road, Montvale, NJ 07645; 800-368-2738; 201/391-2700; Fax: 201/391-2899. e-mail: sales@radstone.com; via the web: www.radstone.com.
SKY Computers, Inc. introduces the SKYburst 160 parallel I/O interface, the industry's fastest implementation of the Front Panel Data Port (FPDP) 32-bit parallel I/O standard. The peak rate of 160 MB/sec is achievable because the SKYburst 160 daughtercard connects to the SKYbolt II motherboard via a 320 MB/sec SKYchannel Packet Bus interface. Unlike competitive products, this motherboard connection does not create a throughput bottleneck, and the daughtercard form factor allows the SKYburst 160 to be added to the SKYbolt II multiprocessing accelerator without sacrificing compute processors. Show a Photo. Complete SKY information is available at SKY's world wide web page: http://www.sky.com
SKY Computers, Inc. has introduced its new heterogeneous multiprocessor, the SKYbolt® II 9U SKYchannel accelerator. Architectured with1.28 GFLOPS of multiprocessing performance, the SKYchannel 320 MB/sec packet bus, VME64, and the built-in SKYburst 160 FPDP I/O interface, the SKYbolt II 9U is the only
accelerator that provides I/O performance to match compute performance. The SKYbolt II 9U utilizes motherboards in combination with I/O and compute daughtercards to allow users to configure solutions with the highest combination of performance and throughput for their specific application. The SKYbolt II 9U can be configured with up to four of SKY's four-processor Shamrock n daughtercards, to provide 1.28 GFLOPS processing and 320 MB/sec interprocessor communication. Future generations of daughtercards, using faster processors, can easily be plugged onto the motherboard. Software developed on the SKYbolt I will run unmodified on the SKYbolt II and future higher performance daughtercards, guaranteeing the customer's valuable software investment and continued refreshing of technology. For more information contact:
Sky Computers, Inc. at 508-250-1920 or See: www.sky.com.
Themis Computer announces a new version of its SPARC 5/64 VME Engine, the SPARC 5/64-2S2E, designed for demanding telecommunications, high availability and rugged applications. The SPARC 5/64-2S2E combines the high performance microSPARCII processor, a high-speed VME64 interface, and dual Ethernet/SCSI-2 interfaces and ECC memory. This high-performance SPARC platform combines 110MHz RISC processing with Sun Solaris compatibility, giving the user access to over 9000 Solaris 1.x and over 2500 Solaris 2.x off-the-shelf software solutions. Designed under license from Sun Microsystems, the SPARC 5/64-2S2E is a VMEbus and I/O extended version of Sun's SPARCstation5 workstation.
For more information, please contact THEMIS COMPUTER US, 3185 Laurelview Court, Fremont, CA 94538; tel: 510/252-0870, fax: 510/490-5529; email: sales@themis.com; WWW: http://www.themis.com
Themis Computer has introduced the first SPARCstation20-compatible VME single board computer, the SPARC®D20MP Multiprocessing SPARC Engine. Standing on the shoulders of its highly successful SPARC 10MP, Themis's SPARC 20MP has improved MBus and VMEbus performance. Significant performance gains have been achieved without sacrificing the SPARC 20MP's 100% binary compatibility with Sun's SPARCstation 20 family. The SPARC 20MP offers an enhanced VME64 interface, a faster 50 MHz MBus architecture and VME driver compatibility across the entire SPARC processing technology range. The SPARC 20MP is the only VMEbus platform that lets a system integrator utilize the entire range of Sun SPARC perfromance, from performance equivalent to a uniprocessor SPARCstation5 to that of a multiprocessing SPARCserver1000 and UltraSPARC. Themis's MVP board support package allows a SPARC 20MP to run four independent copies of VxWorks simultaneously. For more information, please contact THEMIS COMPUTER US, 3185 Laurelview Court, Fremont, California 94538. Phone. (510) 252-0870. Fax: (510) 490-5529. Email: sales@themis.com. WWW: www.themis.com.
VisiCom Laboratories, Inc. announces the availability of the new Vigra Sliver multimedia server, which provides the power of video, audio and graphics all on a single-slot VME board. The Vigra Sliver board is ideal for applications that require high performance graphics, integration of live video with graphics, and compression/decompression capabilities for storing data or moving it over a network. Vigra Sliver is modular and flexible in design, and can be configured to meet specific multimedia requirements. It is designed around an on-board 32-bit RISC processor, 8 or 32Mbytes of DRAM and 128 Kbytes of FLASH EPROM. There is a four channel UART which provides a PC or Sun keyboard interface, serial mouse port, and two RS232C serial ports. Sliver also has two separate accelerated frame buffers, each providing 2.5Mbytes of VRAM, two video accelerators, and two daughter board sites, each with system bus and video accelerator interfaces. The graphics accelerators provide very high speed 8-bit per pixel rendering into two orthogonal frame buffers. The video accelerators support smooth scaling (shrink and enlarge) of full frame resolution video windows. Show a Photo.
VisiCom has its headquarters in San Diego, CA and offices in Colorado, Florida. Virginia, Arizona, Washington, and the United Kingdom. Phone (619) 597- 7080.
Packaging & Backplanes
AP Labs announces the addition of the FS-9601 to its FULLspectrum product line of ruggedized enclosures. The FS-9601 is a rackmount peripheral expansion chassis designed to meet diverse industrial and military applications. As with all AP Labs' enclosures, the FS-9601 can be provided as stand-alone, powered chassis or as a fully integrated, wired, and tested peripheral chassis. The FS-9601 provides mounting for up to 14 half high peripherals within the enclosure which are front door accessible. The standard configuration is wired with a 374 Watt PFC power supply. The enclosure meets MIL-STD-810E shock and vibration specifications for ground mobile and aircraft. The enclosure also meets MIL-STD-167/1 shipboard shock and vibration specifications. In keeping with its philosophy of providing customers with comprehensive capabilities in Commercial-Off-The-Shelf (COTS) enclosures, AP Labs designed the FULLspectrum FS-9601 enclosure to meet FCC Class B specifications and optionally, MIL-STD-461C. Show a Photo. For more information Contact: Steve Gills, AP Labs, 5871 Oberlin Drive, San Diego, CA 92121, Tel: (619) 546-8626, Fax: (619) 546-0278, E-mail: steve.gills@sd.aplabs.com, Home Page: www.sd.aplabs .com
Hybricon Corporation an- nounces the release of a new line of high performance VME64 bit extension backplanes designed to meet the new VME64 Extensions specification (VITA1.1-199x). These 14 layer backplanes feature a 5 row, 160 pin VME extension connector and are fully backward compatible with VME64 and VME32 equipped boards. They are ideal for use with high performance P2 mezzanine boards such as RACEway and Quickring as well as systems requiring fault tolerant features. Show a Photo. Hybricon Corporation 12 Willow Rd., Ayer, MA 01432; Tel: (508) 772-5422; E-Mail: sales@hybricon.com; Fax: (508) 772-2963; Web Page: http://www.hybricon.com.
VERO Electronics has expanded its range of Eurocard format extender boards, used to bring active boards out of the enclosure for testing and set-up while maintaining electrical continuity with the backplane. The expanded line ranges from simple double-sided 3U and 6U boards, through 3U double-sided PTH extenders. The double-sided 3U and 6U Eurocard boards provide a low-cost method of access to an active board under test. They are furnished with a unique support/ejector mechanism which supports the board under test. VERO's multilayer extender boards have three layers and feature an internal ground plane and guard tracking among the 42 signal tracks on each side of the board. Show a Photo. For more information, contact George Ross at VERO Electronics, Inc., 1000 Sherman Ave., Hamden, CT 06514-1336. Tel: 1-800-242-2863. Fax: (203) 287-0062. e-mail: vero@vero-usa.com.
Software
National Instruments has announced that its entire library of instrument drivers for use with LabVIEW® and LabWindows®/CVI software is available on the InstrumentationWeb at http://www .natinst.com/idnet. More than 550 instrument drivers are on the Instrument Driver Network, any of which can be downloaded for free. Users can search the network by keyword or phrase. They can also browse all instrument drivers categorized by vendor, by LabVIEW instrument drivers, and by LabWindows/CVI instrument drivers. By using the site, users can download the latest instrument driver development tools and enter requests for new instrument drivers. Instrument Driver Network is available now, free of charge. For more information, contact National Instruments at 6504 Bridge Point Parkway, Austin, Texas 78730-5039; (512) 794-0100. Or call toll free in the U.S. and Canada at (800) 433-3488; fax (512) 794-8411; e-mail info@natinst.com. Readers can also access information through the company's InstrumentationWeb at http://www.natinst.com/
New Literature
EKF introduces its new VMEbus High Performance Catalogue. The VMEbus manufacturer presents its most interesting hard-and software products for realtime applications. The catalogues are available either in English or German. Show a Photo. The English version is also distributed (in parts) in the World Wide Web using the server URL http://ekf.de from any Internet access. The catalogues can be obtained free of charge by sending a request to Fax ++49 (0)2381/6890-90 or Internet Email info@ekf.de.
Electronic Solutions, announces its new "Innovative Technology in System Packaging" catalog. The 130-page catalog is complete with company and technical achievement overviews (including Electronic Solutions' ISO 9001 certification, Continuous Process Improvement programs, discussions on the company's cooling advancements, shock and vibration analysis and EMI/RFI testing) as well as detailed product photos and design specifications. The catalog details Electronic Solutions' complete line of custom and off the-shelf system packaging, including system enclosures, card cages, power cages and backplanes for VMEbus, Multibus I and II, Sun/VMEbus, VXI and Futurebus +. Rackmount and ruggedized enclosures as well as those specifically designed for telecommunication applications are also discussed. Formerly custom-only and recently introduced products are also now offered in the catalog. Show a Photo. For a free copy of Electronic Solutions easy to use catalog, please call (800) 854-7086 or write to: Electronic Solutions, 6790 Flanders Drive, San Diego, CA 92121.
The industry's most extensive range of capabilities for the design and manufacture of VMEbus board level products and systems for demanding and severe environment applications is documented in a new brochure just published by Radstone Technology. The new brochure traces more than 40 years of experience in providing high reliability computer sub-systems for OEM applications, including open bus architecture product for the military since the 1970s and VME product since the introduction of the VMEbus in 1983. Radstone's pioneering of the military VME market starting in 1986 is also Entitled, "Radstone Technology: Your Proven Partner for Very Serious VME", the new 16-page, full color, amply illustrated corporate brochure documents Radstone's extensive design, production and test/quality assurance operations, including custom design and manufacture, program management and documentation. Show a Photo. Copies of the new Radstone Very Serious VME capabilities brochure are available upon request from Radstone Technology Corp., 50 Craig Road, Montvale, NJ 07645; 800-368-2738; 201/391-2700; Fax: 201/391-2899. e-mail: sales@radstone.com; via the web: www.radstone.com.
Return to Table of Contents