(This is File No. 3 of 3 VMEbus Analog I/O Files)
THALES COMPUTERS Tel: +33 (0)4 98 16 34 00 - (732) 494 1010
| Function | Description | Software Support | ADDR/ DATA Width | Size |
|---|---|---|---|---|
8 Chan. D/A | Parallel Lines Digital I/O, ADC: 32 single-ended/16 differential inputs; 0-10, ±5, ±10V input ranges; VMEbus intrptr. DAC: 8 voltage/current output channels; jumper-set output voltages. PIO: 2 24-line Opto 22-compat connectors. Commercial, Ext. Temp versions. Model No. MD-DAADIO | |||
D/A | 24 Channels, 12-bit resolution D/A module. Optional full galvanic isolation. On-board precision voltage reference for standard unipolar/bipolar ranges (0-5, 0-10, ±5, ±10 VDC). Selection per channel of individual external AC/DC voltage reference in the range of ±10V. Commercial, Ext. Temp, Rugged and MIL-SPEC versions. Model No. CM-DA-40 | |||
Intelligent A/D | 32 single-ended channels (16 differential). 100Ksps 12-bit A/D. Unipolar or bipolar input ranges (0-5, 0-10, 0-50, 0-100, ±2.5, ±5, ±25, ±50, ±100V). On-board 4KB dual port SRAM for data conversion storage. Single or sequential channel sampling. Software programmable gain per channel. VME interrupter. Full Built-In-Test capability. Analog signals via cannon connectors on front panel and VME64x connector on P2. P0 connector available for key slot purposes. Commercial, Ext. Temp, Rugged and MIL-SPEC versions. Model No. CM-AD-45 | and Generic ANSI C Source Code Driver |
VMIC Tel: (256) 880-0444, (800) 322-3616
| Function | Description | Software Support | ADDR/ DATA Width | Size |
|---|---|---|---|---|
Converter | 12-bit resolution, 32 SE or 16 differential inputs via P2. Two analog outputs. 33 µsec acquisition conversion time. F/S input ranges: 0-10V, ±2.5, 0-5V, ±5V, ±10V. SW programmable gain. End of conversion interrupt. Opt. low pass filter. Model No. VMIVME-3111 | VxWorks QNX | ||
A/D Converter | 12-bit resolution, Built-in-Test. 64 SE or differential analog inputs (±10mV to ±10V). Programmable VME interrupts. Selectable gains, Model No. VMIVME-3113A | VxWorks QNX | ||
A/D Converter w/Programmable Gain | 16-bit resolution, 16 differential inputs. SW programmable gain 1, 10, 100, 1,000. Input sig range ±10mV to ±10V. SW programmable fourth order low pass filters: 1, 10,100, 1,000 Hz. Auto Cal w/DSP. Model No. VMIVME-3119 | VxWorks QNX | ||
16-bit ADC | 16-bit resolution. 64 SE or differential inputs. 1 K dual-port data buffers allow VME access any time and provide storage for continuous scanning of all channels. Various scanning modes. Conversion rate programmable to 100 kHz. Low pass filters from 10-1 kHz. Model No. VMIVME-3122 | VxWorks QNX | ||
Throughput Analog Input w/Simultaneous S/H | 16 high accuracy differential. analog inputs. 16-bit A/D conversion rates to 1.6 million samples/s. Each input has dedicated S/H amplifier and fourth order anti-aliasing filter from 250 Hz to 25 kHz. Buffer stores 8 million samples, digital calibration. Model No. VMIVME-3123 | VxWorks QNX | ||
32-Channel A/D Converter | Scanning 12-bit, 32-channel A/D Converter board with Built-in-Test. Input ranges ±50mV to ±10V, 0-25mA range. Jumper programmable gains of 1, 10, 100. 40kHz conversion rate. Optional 40Hz filters. Model No. VMIVME-3124 | VxWorks QNX | 6U | |
Scanning 32-Channel A/D Converter | Scanning 12-bit, 32 channel A/D Converter board with Built-in-Test. Input ranges ±50mV to ±10V, 0-25mA range. 1,000V Analog GND/Digital GND isolation. Jumper programmable gains of 1, 10, 100. 40kHz conversion rate. Optional 40Hz filters. Model No. VMIVME-3125 | VxWorks QNX | ||
Isolated A/D Converter | 16-channel. high resolution, isolated ADC board. Inputs accept 2-wire isolated signals in the range of ±5mV to ±10V, 0-25mA range. Input-to-input and input-to-VME isolation. Each input is sampled and digitized by a dedicated 24-bit ADC per channel. Model No. VMIVME-3126A | VxWorks QNX | ||
A/D Converter | 64 differential or single-ended inputs, program-selectable scanning of 16, 32, 48 or 64 channel, jumper-selectable A/D ranges of 0-5V, 0-10V, ±2.5V, ±5V, ±10V, opt. low pass filter. Model No. VMIVME-3128 | VxWorks QNX | ||
Thermocouple | 8 isolated, differential input channels. 16-bit microproc. Linearization & cold junction. comp for J, K, T, E, R, S, B, N, W-Re thermocouples, (accepts multiple types simultaneously). Nonvol. storage for cal. parameters. GE Fanuc qual. Model No. VMIVME-3230 | VxWorks QNX | ||
RTD/Strain Bridge Analog Input | Same as VMIVME-3220 above, but provides ease of connector pluggability with the highly proven screw clamping technology. Model No. VMIVME-3800 | VxWorks QNX | ||
Scanning A/D Converter | 12-bit resolution. 32 SE or 16 differential channels. Autoscanning. Input ranges: ±50mV to ±10V or 0 to 25mA. Selectable gains: x1, 10, 100. Selectable A/D ranges: ±5V, ±10, 0-10V. 40kHz. aggregate conv rate. 1,000 V channel-to-bus isolation. Model No. VMIVME-3801 | VxWorks QNX | ||
D/A Converter | 12-bit D/A per channel. 8 channels. 0 to -10V or ±10V outputs. 6 msec settling time. Selectable as 8 independent or one shared AC or DC voltage reference. 2 or 4 quadrant mux option. Model No. VMIVME-4105 | 9491 | ||
Output | 8-channel. 16-bit resolution. Buffered voltage output of ±10V at 5mA. 16-bit D/A per channel. 10 µsec settling time. SW programmable. isolation output switches. SW programmable for simultaneous or immediate update of outputs. External sync. input. Model No. VMIVME-4116 | VxWorks QNX | ||
or Voltage Output | 16-channel. 12-bit resolution D/A. Current or voltage output. Front panel outputs. Current transmitter ranges (0 to 20mA, 4 to 20mA, and 5 to 20mA). Output voltage ranges (0-5V, 0-10V, ±2.5V, ±5V, ±10V). Model No. VMIVME-4120 | VxWorks QNX | ||
Current Output | 8 channels w/12-bit resolution. Each output has a dedicated D/A. Current ranges 0-20mA, 4-20mA, and 5-20mA. Built-in-Test. External Trigger input, Model No. VMIVME-4121 | VxWorks QNX | 6U | |
Output | Eight analog output channels w/12-bit resolution. Each output has dedicated D/A Converter. Capable of source/sink ±10mA up to ±10V. Built-in-Test. External Trigger input. Model No. VMIVME-4122 | 9491 | 6U | |
Output | 32 outputs w/Samp & hold. 12-bit resolution. Outputs short & transient protected. Ranges: 0-5V, 0-10V, ±5V, ±10V at 10mA. P3 output connection. Programmable. scan rates. Model No. VMIVME-4132 | VxWorks QNX | ||
Analog Output | 32 outputs, each with dedicated 12-bit resolution D/A Converter. Ranges: 0-5V, 0-10V, ±2.5V, ±5V, ±10V at 10mA. Automatic calibration initiated by reset or software command. Self-test. 200kHz max sustainable channel update rate. Model No. VMIVME-4140 | VxWorks QNX | ||
Arbitrary Function Generator | 4-channel analog waveform gen. Each channel has: 16-bit DAC, 65 K word buffer 10 mA output drive, 4-pole LP filter, programmable internal time base, external clock and trig inputs. 20-bit auto-cal. DSP-based control and processing. Model No. VMIVME-4145A | VxWorks QNX | ||
12-Channel Analog Output | 12-channel. 12-bit resolution. Voltage or current loop outputs. Each channel is isolated from all other channels and from the VMEbus. Ranges: ±2.5V, ±5V, ±10V at 10mA. Model No. VMIVME-4150 | VxWorks QNX | ||
Scanning Analog I/O | 16 SE or differential input channels. 12-bit resolution A/D Converter. 16 S/H output channel. Input/output ranges: 0-5V, 0-10V, ±2.5V, ±5V, ±10V. Throughputs to 40kHz. Opt. low pass filters. Built-in-Test. Model No. VMIVME-4514A | VxWorks QNX | ||
8-channel 12-bit Analog Output | With voltage or current outputs and screw terminal interface, up to ±1,500V isolation, 12bit res, voltage output ranges selectable as ±2.5V, ±5V, ±10V, 0-2.5V, 0-5V, 0-10V, 4-20mA, 0-20mA, and 5-25mA. Accepts plugable barrier strip cable connector w/user screw terminal interface, connectors are latchable. Model No. VMIVME-4800 | VxWorks QNX | ||
Conditioning | Interfaces directly to analog signals such as thermocouple, RTD, Strain Gage, Frequency, LVDT, or solid state temp. sensor outputs or millivolt or process current signals. Model No. VMIACC-3V/5V Series | |||
Conditioning | 32-Channel Signal Conditioning Board. Accepts low level differential. or SE inputs directly from temperature and pressure transducers, or from any other low-level analog signal source. Companion to VMIVME-31XX series ADC. Model No. VMIVME-3413 | |||
Signal Conditioning | Optional current loop termination accepts low-level differential. inputs. All inputs isolated from each other and from VMEbus. Cal. supported by VMIVME-4125. Open-input detection for thermocouple. Model No. VMIVME-3417A | |||
Signal Conditioning | 32 SE or differential inputs. Programmable gain: x1, 10, 100, 1,000. Input range: ±5mV to ±10V. Each channel contains programmable gain amp, 3-pole active filter. REF (cold) junct comp for thermocouples type: E, J, N, B, T, R, S. Model No. VMIVME-3419 | |||
Conditioning | 16 SE or differential inputs. Programmable gain: x1, 10, 20, 50, 100, 200, 500 or 1,000. Input range: ±10mV to ±10V. Each channel contains SW programmable gain amp, 3-pole active filter. REF (cold) junction comp for thermocouples type: E, J, N, B, T, R, S Active filter (10Hz to 100 kHz). Configurable for RTD, strain gauge bridge, or direct analog input. Open sensor detection. Model No. VMIVME-3420 | |||
Conditioning | Transition panels w/surge withstand protection. Discrete wire interface to VMIC Analog and Digital I/O boards. Protects the I/O electronics from high energy transients. Each signal is routed through surge protectors. Model No. VMIACC-344X | |||
Conditioning | Surge protected interface boards. Meets ANSI/IEEE C37.90.1-1989 surge withstand capability. 6U size permits installing board in standard VME chassis. Cables directly to variety of VMIC I/O boards. Model No. VMIACC-345X |
XYCOMVME Tel: (734) 944-1942
| Function | Description | Software Support | ADDR/ DATA Width | Size |
|---|---|---|---|---|
Analog Input | Conversion rates up to 50khz with a VMEbus interrupt at end of conversion. Includes 3U and 6U front panels. Model No. XVME-500/1 | |||
Analog Output | 4 12bit output channels each independently configurable for output ranges of ±10V, ±5V, 0-10V, 0-5V and 4-20mA. Model No. XVME-505/2 | |||
isolated or non-isolated Output | 16 12bit outputs each independently configurable, isolated version features 4-20mA output. Synchronized output mode allows 4, 8 or 16 channels to be updated simultaneously. Model No. XVME-531/2 isolated | |||
16-bit Inputs 8 12bit Outputs | Programmable gains of 1 to 100 and auto-scanning mode. 100kHz throughput in single channel mode. Input ranges of 0-5V, 0-10V, ±5V and ±10V. Outputs configurable for 4-20mA, 0-5V, 0-10V, ±2.5V, ±5V or ±10V. Model No. XVME-542 | |||
Analog Inputs | Programmable gains of 1 to 100. Features auto-scanning mode and programmable timebase interrupts. 100kHz throughput in single channel mode. Inputs can be configured for 0-5V, 0-10V, ±5V and ±10V ranges. Model No. XVME-564 | |||
Analog Input 32SE/16DI | 100khz throughput, programmable counter/timer. Analog inputs can be scanned in any order and conversion results are stored in 64Kbyte SRAM buffer. Model No. XVME-566 | |||
Analog Inputs | 6U version of XVME-500 with I/O routed out back of module to P2 connector. Model No. XVME-590 |