VMEbus Backplanes (All Types)

ACT/TECHNICO Tel: (215) 956-1200

Configuration Description Size

3- and
5-Row On-board termination, front and rear accessible IACK and BUSGRANT. Choice of power feed. 2 through 21 slots, Commercial, Rugged versions .

VITA 31.1 Backplane for systems requiring slots for implementation of 2.16 communications boards in a VMEbus system. Available up to 20 slots in various configurations .

Configuration	Description	Size
3- and 5-Row	On-board termination, front and rear accessible IACK and BUSGRANT. Choice of power feed. 2 through 21 slots, Commercial, Rugged versions	.
VITA 31.1	Backplane for systems requiring slots for implementation of 2.16 communications boards in a VMEbus system. Available up to 20 slots in various configurations	.

AMP Tel: (800) 524-6579 ext. 2013

Configuration Description Size

J1/J2 Monolithic 6 or 8 layer, 2-21 Slots, Integrated busbar design, Model No. VME-OXX-YU 6U

Custom As above with partial or full custom J2 or power distribution 6U

Custom As above with AMP DIN (Eurocard) or customer specific Active DIN (Eurocard) Connectors 3U
6U
9U

Configuration	Description	Size
J1/J2 Monolithic	6 or 8 layer, 2-21 Slots, Integrated busbar design, Model No. VME-OXX-YU	6U
Custom	As above with partial or full custom J2 or power distribution	6U
Custom	As above with AMP DIN (Eurocard) or customer specific Active DIN (Eurocard) Connectors	3U 6U 9U

BUSTRONIC CORPORATION Tel: (510) 490-7388

Configuration Description Size

VME64x 2-21 slots, 12 layers, 160 pin VME64 Extension connectors J1 and J2 plus J0. Built-in active electronic daisy chain (EDC), on-board termination, distributed high and low frequency decoupling capacitors, hot swap capable when used with Bustronic hot swap extender. 7U design provides maximum power, easy wire harnessing. Shrouds compatible with J1, J2 and J0. Model No. 101V64XMXX-XXXX .

VME320 6, 7, 9, 12, 15, 20 and 21 slots. 10-14 layers depending on features and slot count, 160 pin VME Extension connectors J1 and J2 plus J0. True 320Mbyte/s data rate. VME64x compatible, auto daisy chain available, hot swap capable when used with Bustronic hot swap extender. On-board termination, supports source synchronous data transfers, 100 percent compatible with legacy VME boards. Distributed high and low frequency decoupling capacitors. Model No. 101V320MXX-XXXX .

VXS 12 slots, Dual Star configuration, compliant to VITA 41.0 specification, two hub slots and 10 payload slots. Nelco-4000-13SI material, 18 layer stripline design, 7U height .

VME160, J1 See above .

J1/J2 Monolithic
and J1/J2 Discrete 8-layer w/Stripline construction, outer layers grnd only, RFI/EMI shielding, matched signal line impedance 74 Ohm. Onboard, inboard termination. High speed decoupling capacitors every slot, low spd decoupling capacitors, Automatic Daisy Chaining available .

. J1/J2 Monolithic, 2-21 slots. Model No. 101VMEM1XX 6U

. J1, 2-21 slots. Model No. 101VMEJ1XX 3U

. J2, 2-21 slots. Model No. 101VMEJ2XX 3U

. J2 Development Backplane, power and ground only, 2-21 slots. Model No. 101PNGJ2XX 3U

VME64 Contact factory for slot sizes available. 8 layer, true stripline construction. 160 pin VME Extension connector compatible, outer layers ground only providing RFI/EMI shielding, distributed high and low frequency decoupling capacitors, various power input options. Model No. 101VME64XX-XXXX .

J3 Sun compatible power and ground, 3-21 slots. Model No. 101PNGJ3XX 3U

Sun J2 Busses 'A' and 'C' rows, meets requirements of VMEbus J2, 3-21 slots. Model No. 101SBPJ2XX 3U

VSB Overlay Modules upgrade existing VME J2 backplanes to include signal bussing for VSB Rev A.1. Geographic address is user programmable. 2-6 slots. Model No. 1340VLJ2XX .

Sun J2 Overlay Used to upgrade standard J2 backplane to include Sun proprietary bussing on 'A' and 'C' rows, 2-6 slots. Model No. 1320VLJ2XX .

Sun J3 Overlay Implements Sun J3 proprietary bus on Sun J3 power & ground backplane, 2-6 slots. Model No. 1320VLJ3XX .

Terminator For J1 or J2 VME backplane .

Terminator For Sun SPARC 1E .

J0 Backplane For development, all pins unbussed, 17mm tails for wirewrapping, opt. shrouds for overlays, replaces Z-rail for DIN connector mounting, completely user definable, 1-21 slots. Model No. 101CMBJ0XX 3U

Interconnects Connects two J1 backplanes, Model No. 101JMPJ101, or two J2 backplanes, Model No. 101JMPJ201 .

Configuration	Description	Size
VME64x	2-21 slots, 12 layers, 160 pin VME64 Extension connectors J1 and J2 plus J0. Built-in active electronic daisy chain (EDC), on-board termination, distributed high and low frequency decoupling capacitors, hot swap capable when used with Bustronic hot swap extender. 7U design provides maximum power, easy wire harnessing. Shrouds compatible with J1, J2 and J0. Model No. 101V64XMXX-XXXX	.
VME320	6, 7, 9, 12, 15, 20 and 21 slots. 10-14 layers depending on features and slot count, 160 pin VME Extension connectors J1 and J2 plus J0. True 320Mbyte/s data rate. VME64x compatible, auto daisy chain available, hot swap capable when used with Bustronic hot swap extender. On-board termination, supports source synchronous data transfers, 100 percent compatible with legacy VME boards. Distributed high and low frequency decoupling capacitors. Model No. 101V320MXX-XXXX	.
VXS	12 slots, Dual Star configuration, compliant to VITA 41.0 specification, two hub slots and 10 payload slots. Nelco-4000-13SI material, 18 layer stripline design, 7U height	.
VME160, J1	See above	.
J1/J2 Monolithic and J1/J2 Discrete	8-layer w/Stripline construction, outer layers grnd only, RFI/EMI shielding, matched signal line impedance 74 Ohm. Onboard, inboard termination. High speed decoupling capacitors every slot, low spd decoupling capacitors, Automatic Daisy Chaining available	.
.	J1/J2 Monolithic, 2-21 slots. Model No. 101VMEM1XX	6U
.	J1, 2-21 slots. Model No. 101VMEJ1XX	3U
.	J2, 2-21 slots. Model No. 101VMEJ2XX	3U
.	J2 Development Backplane, power and ground only, 2-21 slots. Model No. 101PNGJ2XX	3U
VME64	Contact factory for slot sizes available. 8 layer, true stripline construction. 160 pin VME Extension connector compatible, outer layers ground only providing RFI/EMI shielding, distributed high and low frequency decoupling capacitors, various power input options. Model No. 101VME64XX-XXXX	.
J3	Sun compatible power and ground, 3-21 slots. Model No. 101PNGJ3XX	3U
Sun J2	Busses 'A' and 'C' rows, meets requirements of VMEbus J2, 3-21 slots. Model No. 101SBPJ2XX	3U
VSB Overlay	Modules upgrade existing VME J2 backplanes to include signal bussing for VSB Rev A.1. Geographic address is user programmable. 2-6 slots. Model No. 1340VLJ2XX	.
Sun J2 Overlay	Used to upgrade standard J2 backplane to include Sun proprietary bussing on 'A' and 'C' rows, 2-6 slots. Model No. 1320VLJ2XX	.
Sun J3 Overlay	Implements Sun J3 proprietary bus on Sun J3 power & ground backplane, 2-6 slots. Model No. 1320VLJ3XX	.
Terminator	For J1 or J2 VME backplane	.
Terminator	For Sun SPARC 1E	.
J0 Backplane	For development, all pins unbussed, 17mm tails for wirewrapping, opt. shrouds for overlays, replaces Z-rail for DIN connector mounting, completely user definable, 1-21 slots. Model No. 101CMBJ0XX	3U
Interconnects	Connects two J1 backplanes, Model No. 101JMPJ101, or two J2 backplanes, Model No. 101JMPJ201	.

CARLO GAVAZZI COMPUTING SOLUTIONS Tel: (508) 588-6110

Configuration Description Size

VSB 2 to 6 slots, Fully conforms to VSB Spec Rev. A.1, multilayer construction, Model No. CRXX .

VME64
J1/J2 9 to 21 slots, 10 layer high performance, Model No. DFXX .

VME64
J1/J2 3 to 21 slots, 10 layer high performance w/automtic jumpering for IACK and BG pins, Model No. DKXX 6U

VME64
J1/J2 9 to 21 slots, 10 layer high performance w/optional 160 pin VME64 extension connectors, Model No. DMXX 6U

VME64
J1/J2 3 to 21 slots, 10 layer high performance with shrouds and 10 pin latching header. Automatic jumpering for IACK and BG pins for unpopulated slots. Bus bars included, Model No. DRXX 6U

Sun/VME
J1/J2/J3 4 to 20 slots, 6 layer. EB Series: On board termination, J2 A and C rows bussed; EC Series: in-board termination, J2 A and C rows unbussed, Model No. EBXX, ECXX 9U

VME/Sun
J1/J2 5 to 21 slots, 6 layer, in-board terminated backplane series, Model No. EFXX 6U

Sun J3 5 to 21 slot, 6 layer, B row pins are unbussed user definable pins, Model No. EKXX .

Sun J2 2 to 6 slots, memory bus daughter boards, compatible w/existing VME B row bussing, Model No. EPXX, ERXX .

VME64 J1 2 to 21 slots, 6 layer, Model No. LAXX .

VME64 J2 2 to 21 slots, Model No. LTXX .

VME64x
J1/J2
Monolithic With 160 pin VME extensions connector and VME64 Extensions pin that support system level Live Insertion, Model No. XKXX .

VME64 J1/J2 3 to 21 slots, 6 layer with automatic jumpering for IACK and BG pins, Model No. LKXX .

VME64 J1/J2 3 to 21 slots, 6 layer high performance. With shrouds and 10 pin latching header. Automatic jumpering for IACK and BG pins for unpopulated slots, Model No. LLXX .

VME64 J1/J2 3 to 21 slots, 6 layer high performance. With shrouds and 10 pin latching header. Automatic jumpering for IACK and BG pins for unpopulated slots, Bus bars included, Model No. LRXX .

Configuration	Description	Size
VSB	2 to 6 slots, Fully conforms to VSB Spec Rev. A.1, multilayer construction, Model No. CRXX	.
VME64 J1/J2	9 to 21 slots, 10 layer high performance, Model No. DFXX	.
VME64 J1/J2	3 to 21 slots, 10 layer high performance w/automtic jumpering for IACK and BG pins, Model No. DKXX	6U
VME64 J1/J2	9 to 21 slots, 10 layer high performance w/optional 160 pin VME64 extension connectors, Model No. DMXX	6U
VME64 J1/J2	3 to 21 slots, 10 layer high performance with shrouds and 10 pin latching header. Automatic jumpering for IACK and BG pins for unpopulated slots. Bus bars included, Model No. DRXX	6U
Sun/VME J1/J2/J3	4 to 20 slots, 6 layer. EB Series: On board termination, J2 A and C rows bussed; EC Series: in-board termination, J2 A and C rows unbussed, Model No. EBXX, ECXX	9U
VME/Sun J1/J2	5 to 21 slots, 6 layer, in-board terminated backplane series, Model No. EFXX	6U
Sun J3	5 to 21 slot, 6 layer, B row pins are unbussed user definable pins, Model No. EKXX	.
Sun J2	2 to 6 slots, memory bus daughter boards, compatible w/existing VME B row bussing, Model No. EPXX, ERXX	.
VME64 J1	2 to 21 slots, 6 layer, Model No. LAXX	.
VME64 J2	2 to 21 slots, Model No. LTXX	.
VME64x J1/J2 Monolithic	With 160 pin VME extensions connector and VME64 Extensions pin that support system level Live Insertion, Model No. XKXX	.
VME64 J1/J2	3 to 21 slots, 6 layer with automatic jumpering for IACK and BG pins, Model No. LKXX	.
VME64 J1/J2	3 to 21 slots, 6 layer high performance. With shrouds and 10 pin latching header. Automatic jumpering for IACK and BG pins for unpopulated slots, Model No. LLXX	.
VME64 J1/J2	3 to 21 slots, 6 layer high performance. With shrouds and 10 pin latching header. Automatic jumpering for IACK and BG pins for unpopulated slots, Bus bars included, Model No. LRXX	.

DAWN VME PRODUCTS Tel: (800) 258-DAWN

Configuration Description Size

VME64x
J1/JO/J2 Monolithic backplanes feature 'Auto Bus Grant' J1 connectors that provide electro-mechanical BG/IACK jumpering, an 8-layer microstrip/stripline PCB construction, J2 shrouds and a generous amount of power bugs. J0 connectors and filtration capacitors are optional. P/N: 9200 Series 6U

VME64x
J1/J0/J2 Monolithic backplanes feature 0.200" overall thickness for rugged/COTS/Military applications, and onboard electronic BusGrant jumpering system, making it a perfect drop-in enhanced replacement product for existing chassis designs requiring high-reliability backplanes. Multilayer microstrip/stripline PCB construction, J2 shrouds and copious power bugs hallmark the series' design. J0 connectors and filtration capacitors are optional. P/N: 3700 Series 6U

VME64x
J1/JO/J2 2, 3 & 4 slot, monolithic, w/optional JO connectors. Surface-mount caps, and built-in EBG/IACK (3 and 4 slot) 160pin DIN, 5 row, connectors. Eight-layer design. Custom versions accepted. P/N: 06-10095/96XX 6U

VME64x
J1/JO/J2 5-21 slot, monolithic, w/optional JO connectors. Optional filtration capacitors. Optional manual or electronic bus grant/IACK. 160pin DIN, 5 row connectors. Eight-layer design. Choice of connectors options. Model Nos. VMEBP64XJ1J2/OB, VMEBP64XJ1JOJ2/OB 6U

VME64x
J1 Discrete 3-21 slot, 3U discrete backplanes. Optional filtration capacitors. Optional manual or electronic bus grant/IACK Eight-layer design. 160pin DIN, 5 row, 5mm connectors - standard. Model No. VMEBP64XJ1 3U

VME64x
J2 Discrete 2-21 slot, 3U discrete backplanes. Optional filtraiton capacitors. Optional manual or electronics bus grant/IACK. Eight-layer design. 160pin DIN, 5-row connectors. Choice of connector options. Model No. VMEBP64XJ2 3U

J1/J2
Monolithic 1-21 slots. On board termination, optional filtration capacitors, optional automatic bus grant/IACK. Multiple power and connector options. Customization available. Model No. VMEBPJ1J2/OB 6U

J1 Discrete 3-21 slots. 3U VMEbus discrete J1 backplane. 5-layer design. 96pin DIN, 5mm connectors. Backplanes available with automatic BUSGRANT and IACK jumper connections. Model No. VMEBPJ1/OB 3U

J2 Discrete 3-21 slots. 3U VMEbus discrete J2 backplane. 5-layer design. 96pin DIN, 13mm connectors, w/shrouds - standard. Model No. VMEBPJ2/OB 3U

Development
Backplane J96 VMEbus development, 3U backplanes. 2-21 slots. Two power planes and all 96 pins bussed. 5-layer design. Model No. VMBPXXJ96 3U

JO
Development For development and I/O, all pins unbussed. Choice of connector tail length, and optional shrouds. Replaces Z-rail for DIN connector mounting, completely user definable. Model No. BPXXJO 3U

Power and
Ground Used in applications where standard VMEbus J1/J2 power and ground are desired. May be stacked/intermixed with Dawn's VMEbus to create 6U and 9U configurations. Model No. VMEBPSJ1/SJ2 3U

J1J2SUNbus
J3 Monolithic 2-21 slot. High-performance transmission line compatible w/SUN and VME card cages VMEbus on J1J2, SUN power and ground on J3 Model No. SUNBPXX 9U

Custom
Backplanes 3U, 6U, and 9U custom VMEbus backplane design and development .

Configuration	Description	Size
VME64x J1/JO/J2	Monolithic backplanes feature 'Auto Bus Grant' J1 connectors that provide electro-mechanical BG/IACK jumpering, an 8-layer microstrip/stripline PCB construction, J2 shrouds and a generous amount of power bugs. J0 connectors and filtration capacitors are optional. P/N: 9200 Series	6U
VME64x J1/J0/J2	Monolithic backplanes feature 0.200" overall thickness for rugged/COTS/Military applications, and onboard electronic BusGrant jumpering system, making it a perfect drop-in enhanced replacement product for existing chassis designs requiring high-reliability backplanes. Multilayer microstrip/stripline PCB construction, J2 shrouds and copious power bugs hallmark the series' design. J0 connectors and filtration capacitors are optional. P/N: 3700 Series	6U
VME64x J1/JO/J2	2, 3 & 4 slot, monolithic, w/optional JO connectors. Surface-mount caps, and built-in EBG/IACK (3 and 4 slot) 160pin DIN, 5 row, connectors. Eight-layer design. Custom versions accepted. P/N: 06-10095/96XX	6U
VME64x J1/JO/J2	5-21 slot, monolithic, w/optional JO connectors. Optional filtration capacitors. Optional manual or electronic bus grant/IACK. 160pin DIN, 5 row connectors. Eight-layer design. Choice of connectors options. Model Nos. VMEBP64XJ1J2/OB, VMEBP64XJ1JOJ2/OB	6U
VME64x J1 Discrete	3-21 slot, 3U discrete backplanes. Optional filtration capacitors. Optional manual or electronic bus grant/IACK Eight-layer design. 160pin DIN, 5 row, 5mm connectors - standard. Model No. VMEBP64XJ1	3U
VME64x J2 Discrete	2-21 slot, 3U discrete backplanes. Optional filtraiton capacitors. Optional manual or electronics bus grant/IACK. Eight-layer design. 160pin DIN, 5-row connectors. Choice of connector options. Model No. VMEBP64XJ2	3U
J1/J2 Monolithic	1-21 slots. On board termination, optional filtration capacitors, optional automatic bus grant/IACK. Multiple power and connector options. Customization available. Model No. VMEBPJ1J2/OB	6U
J1 Discrete	3-21 slots. 3U VMEbus discrete J1 backplane. 5-layer design. 96pin DIN, 5mm connectors. Backplanes available with automatic BUSGRANT and IACK jumper connections. Model No. VMEBPJ1/OB	3U
J2 Discrete	3-21 slots. 3U VMEbus discrete J2 backplane. 5-layer design. 96pin DIN, 13mm connectors, w/shrouds - standard. Model No. VMEBPJ2/OB	3U
Development Backplane	J96 VMEbus development, 3U backplanes. 2-21 slots. Two power planes and all 96 pins bussed. 5-layer design. Model No. VMBPXXJ96	3U
JO Development	For development and I/O, all pins unbussed. Choice of connector tail length, and optional shrouds. Replaces Z-rail for DIN connector mounting, completely user definable. Model No. BPXXJO	3U
Power and Ground	Used in applications where standard VMEbus J1/J2 power and ground are desired. May be stacked/intermixed with Dawn's VMEbus to create 6U and 9U configurations. Model No. VMEBPSJ1/SJ2	3U
J1J2SUNbus J3 Monolithic	2-21 slot. High-performance transmission line compatible w/SUN and VME card cages VMEbus on J1J2, SUN power and ground on J3 Model No. SUNBPXX	9U
Custom Backplanes	3U, 6U, and 9U custom VMEbus backplane design and development	.

ELECTRONIC SOLUTIONS Tel: (858) 679-4550

Configuration Description Size

VME Backplanes Conforms to VME64 specification (ANSI/VITA1-1994). 6 Layer stripline construction - J1 and Monolithic J1/J2. 4 Layer stripline construction - J2. 57 W_characteristic impedance control 0 Volts. Patented 0 Volt grounded guard track design. .

VME64x Backplanes Conforms to VME64 specification (ANSI/VITA1-1994). 6 Layer stripline construction - J1 and Monolithic J1/J2. 4 Layer stripline construction - J2. 57 W_characteristic impedance control 0 Volts. Patented 0 Volt grounded guard track design .

Configuration	Description	Size
VME Backplanes	Conforms to VME64 specification (ANSI/VITA1-1994). 6 Layer stripline construction - J1 and Monolithic J1/J2. 4 Layer stripline construction - J2. 57 W_characteristic impedance control 0 Volts. Patented 0 Volt grounded guard track design.	.
VME64x Backplanes	Conforms to VME64 specification (ANSI/VITA1-1994). 6 Layer stripline construction - J1 and Monolithic J1/J2. 4 Layer stripline construction - J2. 57 W_characteristic impedance control 0 Volts. Patented 0 Volt grounded guard track design	.

HARTMANN ELEKTRONIK Tel: +49 (711) 13 989-0

Configuration Description Size

J1 2-21 slots, ON-board or OFF-board terminated, automatic or manual daisy-chaining 3U

J2 2-20 slots, ON-board terminated 3U

J1/J2
Monolithic 4-21 slots, passive or active/passive switchable terminated, automatic or manual daisy-chaining 6U

VME I/O
Channel 5, 9, or 12 slots 3U

VME64 4-21 slots, 5-row DIN, 8 layers, outer layers designed as shielding surface, 3.6mm board thickness, Busbar with screw connection M6, M4 and Faston 6.3 x 0.8mm, current-carrying capacity, busbar 200A, passive or active/passive switchable terminated, manual daisy-chaining 3U

VME64x 4-21 slots, 5-row DIN, J1/J2 and J0 complete assembled or J0 not assembled, 10 layers, outer layers designed as shielding surface, 4.3mm board thickness, screw connection M6 with busbar, M4 and Faston 6.3 x 0.8mm, current-carrying capacity, busbar 200A, additional power supply 3.3V and 48V (38-75V), automatic or manual daisy-chaining 3U

VME64x 6-21 slots, 5-row DIN, J1/J2 and J0 complete assembled or J0 not assembled, 10 layers, outer layers designed as shielding surface, 4.3mm board thickness, screw connection M6 with busbar, M4 and Faston 6.3 x 0.8mm, current-carrying capacity, busbar 200A, additional power supply 3.3V and 48V (38-75V), automatic or manual daisy-chaining 6U

VME64x 5-row DIN, J1/J2 and J0 complete assembled or J0 not assembled, 10 layers, outer layers designed as shielding surface, 4.3mm board thickness, screw connection M6 with busbar, M4 and Faston 6.3 x 0.8mm, current-carrying capacity, busbar 200A, additional power supply 3.3V and 48V (38-75V), automatic daisy-chaining 6,5U

Live Insertion
+ Automatic
Daisy Chain 7 Slots, J1/J2 and J0 complete assembled or J0 not assembled, passive or active termination 6U

VSB 2, 4 or 6 slots .

Terminator For J1 VME backplanes, active or passive, right-angled or parallel .

Custom Wide range of variations. Send us your circuit diagram .

Configuration	Description	Size
J1	2-21 slots, ON-board or OFF-board terminated, automatic or manual daisy-chaining	3U
J2	2-20 slots, ON-board terminated	3U
J1/J2 Monolithic	4-21 slots, passive or active/passive switchable terminated, automatic or manual daisy-chaining	6U
VME I/O Channel	5, 9, or 12 slots	3U
VME64	4-21 slots, 5-row DIN, 8 layers, outer layers designed as shielding surface, 3.6mm board thickness, Busbar with screw connection M6, M4 and Faston 6.3 x 0.8mm, current-carrying capacity, busbar 200A, passive or active/passive switchable terminated, manual daisy-chaining	3U
VME64x	4-21 slots, 5-row DIN, J1/J2 and J0 complete assembled or J0 not assembled, 10 layers, outer layers designed as shielding surface, 4.3mm board thickness, screw connection M6 with busbar, M4 and Faston 6.3 x 0.8mm, current-carrying capacity, busbar 200A, additional power supply 3.3V and 48V (38-75V), automatic or manual daisy-chaining	3U
VME64x	6-21 slots, 5-row DIN, J1/J2 and J0 complete assembled or J0 not assembled, 10 layers, outer layers designed as shielding surface, 4.3mm board thickness, screw connection M6 with busbar, M4 and Faston 6.3 x 0.8mm, current-carrying capacity, busbar 200A, additional power supply 3.3V and 48V (38-75V), automatic or manual daisy-chaining	6U
VME64x	5-row DIN, J1/J2 and J0 complete assembled or J0 not assembled, 10 layers, outer layers designed as shielding surface, 4.3mm board thickness, screw connection M6 with busbar, M4 and Faston 6.3 x 0.8mm, current-carrying capacity, busbar 200A, additional power supply 3.3V and 48V (38-75V), automatic daisy-chaining	6,5U
Live Insertion + Automatic Daisy Chain	7 Slots, J1/J2 and J0 complete assembled or J0 not assembled, passive or active termination	6U
VSB	2, 4 or 6 slots	.
Terminator	For J1 VME backplanes, active or passive, right-angled or parallel	.
Custom	Wide range of variations. Send us your circuit diagram	.

HYBRICON Tel: (978) 772-5422

Configuration Description Size

VME64x 12 layer, high performance, J1/J2 monolithic, 4-21 slots, standard or EBG connectors, optional P0/J0 connectors, Model No. 024-2XX 6U

J1/J2/J3
Monolithic 10 layer, high performance, J1/J2/Sun Compat. J3, 21 slots; standard, enhanced or ABG connectors available, press fit full strip line design, Model No. 024-382-XX 9U

J1/J2
Monolithic 10 layer, high performance, 4-21 slot; standard, enhanced or ABG connectors available, press fit, full stripline design, Model No. 024-X06/024-X03 6U

J1/J2
Monolithic 6 layer, 2-21 slot; standard, enhanced or ABG connectors available, press fit design, Model No. 024-X59/024-X39 6U

J1 6 layer, 2-21 slots; standard or ABG connectors available, press fit design, Model No. 024-107/024-039 .

J2 2 layer, 32bit extension, 2-21 slots, Model No. 024-X08/024-X69 .

J2/J3 2 layer general purpose, 4-21 slots, 3U, Model No. 024-051/024-071 .

J2 Sun 6 layer Sun compatible VME, 3-6 slots, Model No. 024-132-01/024-135-01 .

J3 Sun 4 layer Sun compatible VME, 3-6 slots, Model No. 024-112-01/024-193-01 .

J2 VMX 4 layer , 3-6 slots, Model No. 024-044/024-037 .

J2 VSB 4 layer, 3-6 slots, Model No. 024-102/024-105 .

J2 VSB
Plug-on 4 layer, 3-6 slots, Model No. 024-150/024-153 .

EURO 2 layer unbussed, 9, 20, 21 slots, Model No. 024-088/093-087 3U

Configuration	Description	Size
VME64x	12 layer, high performance, J1/J2 monolithic, 4-21 slots, standard or EBG connectors, optional P0/J0 connectors, Model No. 024-2XX	6U
J1/J2/J3 Monolithic	10 layer, high performance, J1/J2/Sun Compat. J3, 21 slots; standard, enhanced or ABG connectors available, press fit full strip line design, Model No. 024-382-XX	9U
J1/J2 Monolithic	10 layer, high performance, 4-21 slot; standard, enhanced or ABG connectors available, press fit, full stripline design, Model No. 024-X06/024-X03	6U
J1/J2 Monolithic	6 layer, 2-21 slot; standard, enhanced or ABG connectors available, press fit design, Model No. 024-X59/024-X39	6U
J1	6 layer, 2-21 slots; standard or ABG connectors available, press fit design, Model No. 024-107/024-039	.
J2	2 layer, 32bit extension, 2-21 slots, Model No. 024-X08/024-X69	.
J2/J3	2 layer general purpose, 4-21 slots, 3U, Model No. 024-051/024-071	.
J2 Sun	6 layer Sun compatible VME, 3-6 slots, Model No. 024-132-01/024-135-01	.
J3 Sun	4 layer Sun compatible VME, 3-6 slots, Model No. 024-112-01/024-193-01	.
J2 VMX	4 layer , 3-6 slots, Model No. 024-044/024-037	.
J2 VSB	4 layer, 3-6 slots, Model No. 024-102/024-105	.
J2 VSB Plug-on	4 layer, 3-6 slots, Model No. 024-150/024-153	.
EURO	2 layer unbussed, 9, 20, 21 slots, Model No. 024-088/093-087	3U

MERCURY COMPUTER SYSTEMS, INC. Tel: (978) 256-1300

Configuration Description Size

RACE++ 66-MHz RACEway modules are backward compatible with the RACEway Interlink standard (ANSI/VITA 5-1994). Modules utilize P2 connectors of the VME backplane. Deliver up to 2.1 GB/s bandwidth concurrent with VME. Support automatic and priority routing. Commercial, Ext. Temp, Rugged versions. Model No. RACE++ Series ILK1P, ILK4P, ILK8P, ILK12P, ILK16P 6U
9U

RACEway 40-MHz RACEway Interlink standard (ANSI/VITA 5-1994) modules utilize P2 connectors of the VME backplane. Delivers up to 2.1 GB/s bandwidth concurrent with VME. Supports automatic and priority routing. Commercial, Ext. Temp, Rugged versions. Model No. RACE Series ILK1, ILK4, ILK8, ILK12, ILK16, ILKVSB2-3L 6U
9U

Configuration	Description	Size
RACE++	66-MHz RACEway modules are backward compatible with the RACEway Interlink standard (ANSI/VITA 5-1994). Modules utilize P2 connectors of the VME backplane. Deliver up to 2.1 GB/s bandwidth concurrent with VME. Support automatic and priority routing. Commercial, Ext. Temp, Rugged versions. Model No. RACE++ Series ILK1P, ILK4P, ILK8P, ILK12P, ILK16P	6U 9U
RACEway	40-MHz RACEway Interlink standard (ANSI/VITA 5-1994) modules utilize P2 connectors of the VME backplane. Delivers up to 2.1 GB/s bandwidth concurrent with VME. Supports automatic and priority routing. Commercial, Ext. Temp, Rugged versions. Model No. RACE Series ILK1, ILK4, ILK8, ILK12, ILK16, ILKVSB2-3L	6U 9U

RADSTONE EMBEDDED COMPUTING Tel: +44-1327-359444, (800) 368-2738

Configuration Description Size

VME64
J1/J2 3, 5, 10, 15 slot rugged backplanes, 5-row DIN connector options. Model No. RPB3/5/10/15 .

Configuration	Description	Size
VME64 J1/J2	3, 5, 10, 15 slot rugged backplanes, 5-row DIN connector options. Model No. RPB3/5/10/15	.

SCHROFF Tel: (800) 451-8755

Configuration Description Size

VME J1 RoHS compliant VME 7 slot backplane. Model No. 23001-007 3U

VME J1 RoHS compliant VME 10 slot backplane. Model No. 23001-010 3U

VME J1 RoHS compliant VME 12 slot backplane. Model No. 23001-012 3U

VME J1 RoHS compliant VME 20 slot backplane. Model No. 23001-020 3U

VME J2 VME J2 backplanes. 2 layer construction. Shrouds included. 2-20 slots. Model No. 23000-2xx 3U

VME J2 VME J2 backplanes. 2 layer construction. Shrouds included. 1 slot. Model No. 23000-301 3U

VME J2 RoHS compliant VME 3 slot backplane. Model No. 23001-033 3U

VME J2 RoHS compliant VME 5 slot backplane. Model No. 23001-035 3U

VME J2 RoHS compliant VME 16 slot backplane. Model No. 23001-046 3U

VME J1/J2 VME J1/J2 high performance monolithic backplanes with inboard termination. ADC connectors on J1 for Bus Grant and IACK signals standard. 6 layer construction. shrouds on J2 standard. bus bars on power and ground on higher slot counts. 3-9 slots. Model No. 23000-46X 6U

VME J1/J2 VME J1/J2 high performance monolithic backplanes with inboard termination. ADC connectors on J1 for Bus Grant and IACK signals standard. 6 layer construction. shrouds on J2 standard. bus bars on power and ground on higher slot counts. 10-18 slots. Model No. 23000-47X 6U

VME J1/J2 VME J1/J2 high performance monolithic backplanes with inboard termination. ADC connectors on J1 for Bus Grant and IACK signals standard. 6 layer construction. shrouds on J2 standard. bus bars on power and ground on higher slot counts. 20-21 slots. Model No. 23000-48X 6U

VME J1/J2 VME J1/J2 high performance monolithic backplanes with inboard termination. Electronic automatic daisy chaining. Shrouds on J2. Bus bars on power and Ground. 21 slots. Model No. 23000-551 6U

VME J1/J2
Monolithic RoHS compliant VME 9 slot backplane. Model No. 23001-069 6U

VME J1/J2
Monolithic RoHS compliant VME 16 slot backplane. Model No. 23001-076 6U

VME J1/J2
Monolithic RoHS compliant VME 20 slot backplane. Model No. 23001-080 6U

VME64x
Monolithic 5-21 slot high-speed backplanes with on-board/passive termination. 160-pin 5-row DIN connector. Model No. 23001-4XX 6U

VME64x
Monolithic
with SCbus 20-slot high-speed backplane with on-board/passive termination. 160-pin 5-row DIN connector. Model No. 23030-134/140 6U

Universal Shielded backplane suitable for high-speed applications. 21 slots with 6 current tracks. Model No. 23007-051 3U

Configuration	Description	Size
VME J1	RoHS compliant VME 7 slot backplane. Model No. 23001-007	3U
VME J1	RoHS compliant VME 10 slot backplane. Model No. 23001-010	3U
VME J1	RoHS compliant VME 12 slot backplane. Model No. 23001-012	3U
VME J1	RoHS compliant VME 20 slot backplane. Model No. 23001-020	3U
VME J2	VME J2 backplanes. 2 layer construction. Shrouds included. 2-20 slots. Model No. 23000-2xx	3U
VME J2	VME J2 backplanes. 2 layer construction. Shrouds included. 1 slot. Model No. 23000-301	3U
VME J2	RoHS compliant VME 3 slot backplane. Model No. 23001-033	3U
VME J2	RoHS compliant VME 5 slot backplane. Model No. 23001-035	3U
VME J2	RoHS compliant VME 16 slot backplane. Model No. 23001-046	3U
VME J1/J2	VME J1/J2 high performance monolithic backplanes with inboard termination. ADC connectors on J1 for Bus Grant and IACK signals standard. 6 layer construction. shrouds on J2 standard. bus bars on power and ground on higher slot counts. 3-9 slots. Model No. 23000-46X	6U
VME J1/J2	VME J1/J2 high performance monolithic backplanes with inboard termination. ADC connectors on J1 for Bus Grant and IACK signals standard. 6 layer construction. shrouds on J2 standard. bus bars on power and ground on higher slot counts. 10-18 slots. Model No. 23000-47X	6U
VME J1/J2	VME J1/J2 high performance monolithic backplanes with inboard termination. ADC connectors on J1 for Bus Grant and IACK signals standard. 6 layer construction. shrouds on J2 standard. bus bars on power and ground on higher slot counts. 20-21 slots. Model No. 23000-48X	6U
VME J1/J2	VME J1/J2 high performance monolithic backplanes with inboard termination. Electronic automatic daisy chaining. Shrouds on J2. Bus bars on power and Ground. 21 slots. Model No. 23000-551	6U
VME J1/J2 Monolithic	RoHS compliant VME 9 slot backplane. Model No. 23001-069	6U
VME J1/J2 Monolithic	RoHS compliant VME 16 slot backplane. Model No. 23001-076	6U
VME J1/J2 Monolithic	RoHS compliant VME 20 slot backplane. Model No. 23001-080	6U
VME64x Monolithic	5-21 slot high-speed backplanes with on-board/passive termination. 160-pin 5-row DIN connector. Model No. 23001-4XX	6U
VME64x Monolithic with SCbus	20-slot high-speed backplane with on-board/passive termination. 160-pin 5-row DIN connector. Model No. 23030-134/140	6U
Universal	Shielded backplane suitable for high-speed applications. 21 slots with 6 current tracks. Model No. 23007-051	3U

TEK MICROSYSTEMS Tel: (978) 244-9200

Configuration Description Size

RACEway Test Adapter used to implement a single-port, 2-slot RACEway interconnect between two ANSI/VITA 5-1994 RACEway cards. Designed for use in laboratory or test environments for evaluation of RACEway cards. The single port adapter may be used with both 3-row and 5-row P2 connectors. Model No. RTA-S-2 3U

RACEway Test Adapter used to implement a dual-port, 2-slot RACEway interconnect between two dual-port ANSI/VITA 5.1-1994 RACEway cards. Designed for use in laboratory or test environments for evaluation of RACEway cards. The dual-port adapter may also be used for single port interfaces provided that the VMEbus backplane has 5-row P2 connectors. Model No. RTA-D-2 3U

Configuration	Description	Size
RACEway	Test Adapter used to implement a single-port, 2-slot RACEway interconnect between two ANSI/VITA 5-1994 RACEway cards. Designed for use in laboratory or test environments for evaluation of RACEway cards. The single port adapter may be used with both 3-row and 5-row P2 connectors. Model No. RTA-S-2	3U
RACEway	Test Adapter used to implement a dual-port, 2-slot RACEway interconnect between two dual-port ANSI/VITA 5.1-1994 RACEway cards. Designed for use in laboratory or test environments for evaluation of RACEway cards. The dual-port adapter may also be used for single port interfaces provided that the VMEbus backplane has 5-row P2 connectors. Model No. RTA-D-2	3U

TRACEWELL SYSTEMS Tel: (800) 848-4525

Configuration Description Size

J1/J2
Monolithic Available in 5, 7, 12 and 21 slot standard sizes. 8-layer design using SMT (Surface Mount Technology), stripline construction, automatic daisy-chain (active or passive), on-board termination (active or passive), superior electrical performance for crosstalk, impedance control and power distribution, AutoBahn-ready, high power (up to 280A) single point power connection scheme without need for conventional bus-bars. Versions also available for VME64x. Full custom design capability available 6U

21 Slot VME
Power Plane 400W to 800W power supply that mounts directly onto the back of Tracewell Systems 6U standard 21 slot VME backplane. Provides all system control functions and peripheral output voltages. A rugged die-cast aluminum heat sink uses system airflow for cooling. Direct connection from power supply onto backplane eliminates all power wiring and improves supply dynamic current response 6U

Configuration	Description	Size
J1/J2 Monolithic	Available in 5, 7, 12 and 21 slot standard sizes. 8-layer design using SMT (Surface Mount Technology), stripline construction, automatic daisy-chain (active or passive), on-board termination (active or passive), superior electrical performance for crosstalk, impedance control and power distribution, AutoBahn-ready, high power (up to 280A) single point power connection scheme without need for conventional bus-bars. Versions also available for VME64x. Full custom design capability available	6U
21 Slot VME Power Plane	400W to 800W power supply that mounts directly onto the back of Tracewell Systems 6U standard 21 slot VME backplane. Provides all system control functions and peripheral output voltages. A rugged die-cast aluminum heat sink uses system airflow for cooling. Direct connection from power supply onto backplane eliminates all power wiring and improves supply dynamic current response	6U

TRIPLE E CORPORATION Tel: (978) 453-0600

Configuration Description Size

J1/J2
Monolithic 8 layer, matched impedance, 2 to 21 slots, automatic bus grant, optional power bus bars 6U

VME64x J1/J2
Monolithic 10 layer, matched impedance, 5-row connectors, optional J0, 2 to 21 slot 6U

Configuration	Description	Size
J1/J2 Monolithic	8 layer, matched impedance, 2 to 21 slots, automatic bus grant, optional power bus bars	6U
VME64x J1/J2 Monolithic	10 layer, matched impedance, 5-row connectors, optional J0, 2 to 21 slot	6U

VMIC Tel: (256) 880-0444, (800) 322-3616

Configuration Description Size

VME64X Monolithic, enhanced signal transmission, in-board terminations, controlled impedance, improved propagation speed, low crosstalk from trace routing and layer construction techniques that optimize these important electrical qualities. Model No. VMIVME-EMXX 6U

J1 4-12, 15, 16, 20-slot P1 with mounting kit. Model No. VMIVME-P1XX .

J2 4-10, 12, 15, 16, 20 slot P2 with mounting kit. Model No. VMIVME-P2XX .

J2 With 96-position wirewrap connectors. 4-10, 12, 15, 16, 20 slot P2 with mounting kit. Model No. VMIVME P2XXS .

J1/J2 J1/J2 Monolithic. 2-21 slots. Model No. VMIVME-MXX

J1 J1 without terminator (required for use with polarizing bars - 2) 4-12, 15, 16, 20 slots with mounting kit. Model No. VMIVME-P1XXM .

Synchro/Resolver
Test Bus SRTbus 5, 9, or 19-slot Synchro/Resolver J2 test backplane. Model No. VMIVME-SRXX .

Configuration	Description	Size
VME64X	Monolithic, enhanced signal transmission, in-board terminations, controlled impedance, improved propagation speed, low crosstalk from trace routing and layer construction techniques that optimize these important electrical qualities. Model No. VMIVME-EMXX	6U
J1	4-12, 15, 16, 20-slot P1 with mounting kit. Model No. VMIVME-P1XX	.
J2	4-10, 12, 15, 16, 20 slot P2 with mounting kit. Model No. VMIVME-P2XX	.
J2	With 96-position wirewrap connectors. 4-10, 12, 15, 16, 20 slot P2 with mounting kit. Model No. VMIVME P2XXS	.
J1/J2	J1/J2 Monolithic. 2-21 slots. Model No. VMIVME-MXX
J1	J1 without terminator (required for use with polarizing bars - 2) 4-12, 15, 16, 20 slots with mounting kit. Model No. VMIVME-P1XXM	.
Synchro/Resolver Test Bus	SRTbus 5, 9, or 19-slot Synchro/Resolver J2 test backplane. Model No. VMIVME-SRXX	.

Return To Backplanes Index / Return To VME Index By Product Function / Return To VME Directory Main Page