VMEbus Card Rack Hardware

ACT/TECHNICO Tel: (215) 956-1200

Function Description Size

Chassis
Fan Trays 19-inch rack-mountable, 5-fan design for optimal cooling of VME chassis by enhancing air flow in slots 1 through 2 of chassis: two 2 1/2 inch and three 4 1/2 inch fans, removable filter standard, 1U or 2U heights, avail with 5, 10 or 15 fans in depths from 160mm to 400mm, AC and DC (P/N TFT Series) .

Function	Description	Size
Chassis Fan Trays	19-inch rack-mountable, 5-fan design for optimal cooling of VME chassis by enhancing air flow in slots 1 through 2 of chassis: two 2 1/2 inch and three 4 1/2 inch fans, removable filter standard, 1U or 2U heights, avail with 5, 10 or 15 fans in depths from 160mm to 400mm, AC and DC (P/N TFT Series)	.

BUSTRONIC CORPORATION Tel: (510) 490-7388

Function Description Size

Adapter
Boards Industry standard as well as custom, Adapts 6U to 9U size, total signal line shielding, Sun compatible. Model No. 121ADT16XX-XXX .

Adapter Allows boards of different depths to be adapted for use in same chassis. Signal lines completely shielded. Stripline construction, One piece 6U J1/J2 design, 3U and 9U avail. Special configurations available. Model No. 111FFEXXXX 3U
6U
9U

VME64x
Form Factor
Extender Allows boards of different depths to be adapted for use in same chassis. Stripline design 6U

Function	Description	Size
Adapter Boards	Industry standard as well as custom, Adapts 6U to 9U size, total signal line shielding, Sun compatible. Model No. 121ADT16XX-XXX	.
Adapter	Allows boards of different depths to be adapted for use in same chassis. Signal lines completely shielded. Stripline construction, One piece 6U J1/J2 design, 3U and 9U avail. Special configurations available. Model No. 111FFEXXXX	3U 6U 9U
VME64x Form Factor Extender	Allows boards of different depths to be adapted for use in same chassis. Stripline design	6U

CARLO GAVAZZI COMPUTING SOLUTIONS Tel: (508) 588-6110

Function Description Size

Cabinets Custom and standard, cost effective EMI/RFI solution, flush seam construction w/rugged 14 gauge galvanneal steel frame, no tools req. to access equipment, vertical and horizontal airflow applications in same cabinet, many options .

Subracks 6U x 160mm/220mm, 9U x 220mm/280mm/400mm. Accommodate all J1/J2 combinations (P/N 1XX41) 6U
9U

Extender
Boards VME and Sun, Multi-layer, controlled impedance, opt. on-board jumpers or switches that provide on-off passage, provisions for I/O access, available with opt. extender frame (P/N 210 Series) .

VME
Card Depth
Extender 6Ux60mm, extensions of 60mm, permits front panel justification for mixing 160mm with 220mm system boards, multi-layer construction maximizes power distribution while reducing crosstalk, connector commitments configured for VME J1/J2 (P/N 4101210-01) .

VME
Repeater Transfer rates up to 30 MB/s, simple plug and play operation (P/N VME 2000)

Function	Description	Size
Cabinets	Custom and standard, cost effective EMI/RFI solution, flush seam construction w/rugged 14 gauge galvanneal steel frame, no tools req. to access equipment, vertical and horizontal airflow applications in same cabinet, many options	.
Subracks	6U x 160mm/220mm, 9U x 220mm/280mm/400mm. Accommodate all J1/J2 combinations (P/N 1XX41)	6U 9U
Extender Boards	VME and Sun, Multi-layer, controlled impedance, opt. on-board jumpers or switches that provide on-off passage, provisions for I/O access, available with opt. extender frame (P/N 210 Series)	.
VME Card Depth Extender	6Ux60mm, extensions of 60mm, permits front panel justification for mixing 160mm with 220mm system boards, multi-layer construction maximizes power distribution while reducing crosstalk, connector commitments configured for VME J1/J2 (P/N 4101210-01)	.
VME Repeater	Transfer rates up to 30 MB/s, simple plug and play operation (P/N VME 2000)

DAWN VME PRODUCTS Tel: (800) 258-DAWN

Function Description Size

Card Cages 2-21 slot card cages. 3U/6U/9U/12U heights. 160mm, 220mm, 280mm, 340mm and 400mm depths. High-quanity design and manufacturing - complete assemblies. P/N: 19-1XXXXXX 3U,6U
9U,12U

Rugged
Card Cages 2-21 slot, DuroCage 2000 card cages. Single-piece extruded aluminum rail system. 1101.10 versions available. Superior design and quality. Available in 3Ux160 and 6Ux160 standard sizes 3U,6U

Filler Panel 3U, 6U, and 9U standard sizes available. 1-21 slots. Complete with mounting hardware and sleeves. Alodine coating for electrical conductivity. Compliant with IEEE 1101.1. Model No. VMEFLP 3U,6U
9U

Front Panel 3U4HP, 6U 4&8HP, 9U 4&8HP standard sizes available. Complete with mounting hardware. Alodine coating for electrical conductivity. Compliant with IRRR 1101.1. Model No. VMEFP 3U,6U
9U

Slot Bypass
Boards Fills empty slot in VME/VME64x chassis. Provides front panel for finished appearance. Maintains efficient air flow and bypasses IACK and BUSGRANT signals. 3U, 6U, 9U sizes. 160, 220, 280, 340, and 400mm depths. Model No. VMESB 3U,6U
9U

Form Factor
Adaptors Adapts 6Ux160mm VMEbus board to 9Ux400mm card slot. Connects all J1 and J2 signals Model No. VMEFFA .

Function	Description	Size
Card Cages	2-21 slot card cages. 3U/6U/9U/12U heights. 160mm, 220mm, 280mm, 340mm and 400mm depths. High-quanity design and manufacturing - complete assemblies. P/N: 19-1XXXXXX	3U,6U 9U,12U
Rugged Card Cages	2-21 slot, DuroCage 2000 card cages. Single-piece extruded aluminum rail system. 1101.10 versions available. Superior design and quality. Available in 3Ux160 and 6Ux160 standard sizes	3U,6U
Filler Panel	3U, 6U, and 9U standard sizes available. 1-21 slots. Complete with mounting hardware and sleeves. Alodine coating for electrical conductivity. Compliant with IEEE 1101.1. Model No. VMEFLP	3U,6U 9U
Front Panel	3U4HP, 6U 4&8HP, 9U 4&8HP standard sizes available. Complete with mounting hardware. Alodine coating for electrical conductivity. Compliant with IRRR 1101.1. Model No. VMEFP	3U,6U 9U
Slot Bypass Boards	Fills empty slot in VME/VME64x chassis. Provides front panel for finished appearance. Maintains efficient air flow and bypasses IACK and BUSGRANT signals. 3U, 6U, 9U sizes. 160, 220, 280, 340, and 400mm depths. Model No. VMESB	3U,6U 9U
Form Factor Adaptors	Adapts 6Ux160mm VMEbus board to 9Ux400mm card slot. Connects all J1 and J2 signals Model No. VMEFFA	.

ELECTRONIC SOLUTIONS Tel: (858) 679-4550

Function Description Size

VME Extender Boards Available in J1 and J2 versions with an optional conversion kit to allow for use in 6U systems. Conforms fully with the VMEbus core specification. Signal pin-out identification silk screened onto outer layers. Jumper links provided to allow signal line interrogation. Card eject/support mechanism provided. Conversion kit for combining J1 and J2 extender boards in 6U assembly. .

VME64x Extender Boards Designed to extend all J1 and J2 positions, the board is a 10-layer construction and is fitted with a connector to facilitate the use of a logic analyzer or terminator module. Individual signal track screening. Cutout in P0/J0 area to allow dedicated cable assemblies to be connected to J0 on backplanes to J0 on boards - improves flexibility of use. .

Function	Description	Size
VME Extender Boards	Available in J1 and J2 versions with an optional conversion kit to allow for use in 6U systems. Conforms fully with the VMEbus core specification. Signal pin-out identification silk screened onto outer layers. Jumper links provided to allow signal line interrogation. Card eject/support mechanism provided. Conversion kit for combining J1 and J2 extender boards in 6U assembly.	.
VME64x Extender Boards	Designed to extend all J1 and J2 positions, the board is a 10-layer construction and is fitted with a connector to facilitate the use of a logic analyzer or terminator module. Individual signal track screening. Cutout in P0/J0 area to allow dedicated cable assemblies to be connected to J0 on backplanes to J0 on boards - improves flexibility of use.	.

ELMA ELECTRONIC Tel: (510) 656-3400

Function Description Size

Jumper Boards
Slot Bypass Bypass Busgrant & IACK pins, enhance airflow, fill unused slots (P/N 80-xxxJB-00) .

Form Factor
Adapters Multi-layer construction, signal line shielding, recessed or flush front panel options .

Disk Drive
Holders Modular plug-in drive holder for 3.5 inch drives, 3Ux9T, 12T for TEAC (P/N 27-309/312-41) .

. As above, 3Ux10T (Panasonic), 3Ux14T (Sony OA-D31V) (P/N 27-314/310-41) .

Disk Drive
Holders For 5.25 inch drives, 4Ux14T (HH), 4Ux24T (2xHH) 4Ux22T (FH) (P/N 27-414-11/21/31) .

. As above, 6Ux12T (HH), 6Ux21T (2xHH), 6Ux20T (FH) (P/N 27-612-11/12/31) .

. As above, 3Ux32T (HH, FH) (P/N 27-332-11/31) .

Plug-in
Fan
Modules For horizontal cooling, heights with AC or DC fans, 110/220V available .

Custom VME, VXI and Sun. 2-21 slots .

Function	Description	Size
Jumper Boards Slot Bypass	Bypass Busgrant & IACK pins, enhance airflow, fill unused slots (P/N 80-xxxJB-00)	.
Form Factor Adapters	Multi-layer construction, signal line shielding, recessed or flush front panel options	.
Disk Drive Holders	Modular plug-in drive holder for 3.5 inch drives, 3Ux9T, 12T for TEAC (P/N 27-309/312-41)	.
.	As above, 3Ux10T (Panasonic), 3Ux14T (Sony OA-D31V) (P/N 27-314/310-41)	.
Disk Drive Holders	For 5.25 inch drives, 4Ux14T (HH), 4Ux24T (2xHH) 4Ux22T (FH) (P/N 27-414-11/21/31)	.
.	As above, 6Ux12T (HH), 6Ux21T (2xHH), 6Ux20T (FH) (P/N 27-612-11/12/31)	.
.	As above, 3Ux32T (HH, FH) (P/N 27-332-11/31)	.
Plug-in Fan Modules	For horizontal cooling, heights with AC or DC fans, 110/220V available	.
Custom	VME, VXI and Sun. 2-21 slots	.

ELTA ELECTRONIC INDUSTRIES Tel: 972-8-857 2413

Function Description Size

8 COTS
Boards
Ruggedizing
Chassis 19 inch rack mount chassis with cooling fans and shock/vibration isolators. Allows commercial boards to survive under shipboard, ground mobile and certain airborne environmental conditions. Chassis can accommodate shock mounted CD-ROM, HDD and FDD. Available in SUN/SPARC, Digital Alpha and other configurations 6U

18 COTS
Boards
Ruggedizing
Chassis 19 inch rack mount chassis with cooling fans and shock/vibration isolators. Allows commercial boards to survive under shipboard, ground mobile and certain airborne environmental conditions. Available in SUN/SPARC, Digital Alpha and other configurations 6U

Function	Description	Size
8 COTS Boards Ruggedizing Chassis	19 inch rack mount chassis with cooling fans and shock/vibration isolators. Allows commercial boards to survive under shipboard, ground mobile and certain airborne environmental conditions. Chassis can accommodate shock mounted CD-ROM, HDD and FDD. Available in SUN/SPARC, Digital Alpha and other configurations	6U
18 COTS Boards Ruggedizing Chassis	19 inch rack mount chassis with cooling fans and shock/vibration isolators. Allows commercial boards to survive under shipboard, ground mobile and certain airborne environmental conditions. Available in SUN/SPARC, Digital Alpha and other configurations	6U

HYBRICON Tel: (978) 772-5422

Function Description Size

Subracks IEEE 1101.10/.11 compliant, rugged construction. Hybricon's patented CoolSlot air deflecting card guides improve air flow. Rack mount or optional mount configurations, full range of sizes .

Front Panels Standard and custom. Elastomeric EMI gaskets eliminate problems found in competitive metal gaskets (no sharp edges, no snags). Offered in various widths and heights .

Hard Drive
Carrier Supports dual Hot Swap SCSI SCA hard drives (hard drives not included). Dual independent SCSI Buses support RAID configurations. Silver-filled elastomeric gaskets eliminate problems with competitive metal gaskets (no sharp edges, no snags) 6U,
8HP

Air Blockers Compatible with VME, VXI, VME64 Extensions and CompactPCI. Multiple choices of IEEE 1101.10 compliant injector / ejector. Full range of sizes from 3Ux160mm to 9Ux400mm .

Peripheral
Shuttles Offered in various combinations of CD, hard drive, floppy drive. Polycarbonate overlay for finished look. Fixed, Hot Swap, and Telco handles available. 8HP/12HP/16H .

Alarm
Card Provides external NEBS alarming capability for Telecom applications. Conforms to PICMG 2.9 R1.0 System Management specification. Communicates using industry standard IPMI protocols. .

Fan Integrated fan controller and temperature monitoring board. Capable of operating stand-alone without an IPMB, or operates as an intelligent IPMI device. Adaptable to a wide variety of fan types. .

Function	Description	Size
Subracks	IEEE 1101.10/.11 compliant, rugged construction. Hybricon's patented CoolSlot air deflecting card guides improve air flow. Rack mount or optional mount configurations, full range of sizes	.
Front Panels	Standard and custom. Elastomeric EMI gaskets eliminate problems found in competitive metal gaskets (no sharp edges, no snags). Offered in various widths and heights	.
Hard Drive Carrier	Supports dual Hot Swap SCSI SCA hard drives (hard drives not included). Dual independent SCSI Buses support RAID configurations. Silver-filled elastomeric gaskets eliminate problems with competitive metal gaskets (no sharp edges, no snags)	6U, 8HP
Air Blockers	Compatible with VME, VXI, VME64 Extensions and CompactPCI. Multiple choices of IEEE 1101.10 compliant injector / ejector. Full range of sizes from 3Ux160mm to 9Ux400mm	.
Peripheral Shuttles	Offered in various combinations of CD, hard drive, floppy drive. Polycarbonate overlay for finished look. Fixed, Hot Swap, and Telco handles available. 8HP/12HP/16H	.
Alarm Card	Provides external NEBS alarming capability for Telecom applications. Conforms to PICMG 2.9 R1.0 System Management specification. Communicates using industry standard IPMI protocols.	.
Fan	Integrated fan controller and temperature monitoring board. Capable of operating stand-alone without an IPMB, or operates as an intelligent IPMI device. Adaptable to a wide variety of fan types.	.

HYTEC ELECTRONICS Tel: +44 (0) 118 9757770

Function Description Size

19-inch
Rackmount 2U high mains powered 19-inch rack-mounting unit. 16 separate Isolation Amplifiers. Resolution 11bits. Range ±10V. BW selectable 10Hz-100KHz. ±300 Volt Isolation. Model No. ISO5401 2U

VME64X
Crate 19 inch Rackmount. P1, P2, P10 f 7-slot monolithic 4U 19 -inch 440W universal 110-240 volt AC Po +5V 40 A, +3.3 V 35 A, +12V 10 A, -12 V 6 A, 440 watts .6U and horizontal cards. Fan Cooled. Model No. VCR8805 4U

VME64X
Crate 19 inch Rackmount. 8U high 10-slot 600W PSU 8U

VME64X
Crate 19 inch Rackmount. 11U high 21-slot dual 600W PSU. Model No. VCR8815 6U

Function	Description	Size
19-inch Rackmount	2U high mains powered 19-inch rack-mounting unit. 16 separate Isolation Amplifiers. Resolution 11bits. Range ±10V. BW selectable 10Hz-100KHz. ±300 Volt Isolation. Model No. ISO5401	2U
VME64X Crate	19 inch Rackmount. P1, P2, P10 f 7-slot monolithic 4U 19 -inch 440W universal 110-240 volt AC Po +5V 40 A, +3.3 V 35 A, +12V 10 A, -12 V 6 A, 440 watts .6U and horizontal cards. Fan Cooled. Model No. VCR8805	4U
VME64X Crate	19 inch Rackmount. 8U high 10-slot 600W PSU	8U
VME64X Crate	19 inch Rackmount. 11U high 21-slot dual 600W PSU. Model No. VCR8815	6U

RADSTONE EMBEDDED COMPUTING Tel: +44-1327-359444, (800) 368-2738

Function Description Size

Hardware Kit Stiffening bars, wedge locks and interface parts to enable custom designed6U boards to be used in IEEE 1101.2 compliant enclosures for conduction cooled boards .

Function	Description	Size
Hardware Kit	Stiffening bars, wedge locks and interface parts to enable custom designed6U boards to be used in IEEE 1101.2 compliant enclosures for conduction cooled boards	.

SCHROFF Tel: (800) 451-8755

Function Description Size

Subrack
System VME64x 10U (2U+6U+2U) subrack system; 21-Slot backplane with PO connector. Model No. 20836-200 .

Subrack
System VME 3U subrack system; 5-Slot Backplane horizontal mounted. Model No. 20836-310 .

Subrack
System VME 4U subrack system; 8-Slot Backplane horizontal mounted. Model No. 20836-415 .

Subrack
System VME64x 4U subrack system; 8-Slot backplane without PO connector. Model No. 20836-416 .

Subrack
System VME 7U (6U+1U) subrack system; 12-Slot Backplane with fan tray drawer. Model No. 20836-715 .

Subrack
System VME 7U (1/2U+6U+1/2U) subrack system; 12-Slot Backplane. Model No. 20836-716 .

Subrack
System VME64x 7U (1/2U+1/2U+6U) subrack system; 12-Slot Backplane without PO connector. Model No. 20836-717 .

Subrack
System VME 8U (1U+6U+1U) subrack system; 21-Slot Backplane. Model No. 20836-815 .

Card
Cages Comprehensive line of subracks and accessories with most being available from stock. For board depths of 160mm and 220mm, assembled, ready-to-use, or in piece parts. EMC and metric versions available. Model No. 308XX-001/676 3U
6U
9U

Accessories Complete range of accessories including front panels, guide rails, board handles, side plates and hardware. Model No. 308XX-001/676 .

Plug-in
Units Several types of Type 2 plug-in units with either static, type C or type B handles. Also available are Box-type 4 plug-in units for single or multiple boards, EMC frame type plug-in units and Drive Units. Most available from stock. Model No. 208XX and 308XX 3U
6U
9U

Function	Description	Size
Subrack System	VME64x 10U (2U+6U+2U) subrack system; 21-Slot backplane with PO connector. Model No. 20836-200	.
Subrack System	VME 3U subrack system; 5-Slot Backplane horizontal mounted. Model No. 20836-310	.
Subrack System	VME 4U subrack system; 8-Slot Backplane horizontal mounted. Model No. 20836-415	.
Subrack System	VME64x 4U subrack system; 8-Slot backplane without PO connector. Model No. 20836-416	.
Subrack System	VME 7U (6U+1U) subrack system; 12-Slot Backplane with fan tray drawer. Model No. 20836-715	.
Subrack System	VME 7U (1/2U+6U+1/2U) subrack system; 12-Slot Backplane. Model No. 20836-716	.
Subrack System	VME64x 7U (1/2U+1/2U+6U) subrack system; 12-Slot Backplane without PO connector. Model No. 20836-717	.
Subrack System	VME 8U (1U+6U+1U) subrack system; 21-Slot Backplane. Model No. 20836-815	.
Card Cages	Comprehensive line of subracks and accessories with most being available from stock. For board depths of 160mm and 220mm, assembled, ready-to-use, or in piece parts. EMC and metric versions available. Model No. 308XX-001/676	3U 6U 9U
Accessories	Complete range of accessories including front panels, guide rails, board handles, side plates and hardware. Model No. 308XX-001/676	.
Plug-in Units	Several types of Type 2 plug-in units with either static, type C or type B handles. Also available are Box-type 4 plug-in units for single or multiple boards, EMC frame type plug-in units and Drive Units. Most available from stock. Model No. 208XX and 308XX	3U 6U 9U

THALES COMPUTERS Tel: +33 (0)4 98 16 34 00 - (732) 494 1010

Function Description Size

VME64x 19 in.
Standard
Rack 7 VME64x 6U slots on front panel and a rear panel extension cage, 5-row connectors with centrol P0 connector, two built-in fans. Model No. R712VME64x 6U

VME64x 19 in.
Standard
Rack 12 VME64x 6U slots, 5-row connectors, peripheral cartridge for 2 Wide SCSI devices, and peripheral cartridge for CD-ROM drive, high-performance power supply, three built-in fans. Model No. R712VME64x 6U

VME64x 19 in.
Industrial
Rack 7 6U VME64x slots, standard 5-row connectors, central P0 connectors, rear backplane I/O extensions. Temperature controlled ventilation system, transport cover to protect boards and cables, two built-in fans. Model No. R7064x 6U

VME64x 19 in.
Industrial
Rack 4 6U VME64x slots, compact rear panel rackmount chassis, standard 5-row connectors, two internal 3-1/2 in. peripherals on front panel, one built-in fan. Model No. R2064x 6U

Card Cage 2-21 slot card cages for panel, rack, hanging, or table mounting. Available with numerous power supply and backplane options. Model No. C3/C6 3U
6U

Function	Description	Size
VME64x 19 in. Standard Rack	7 VME64x 6U slots on front panel and a rear panel extension cage, 5-row connectors with centrol P0 connector, two built-in fans. Model No. R712VME64x	6U
VME64x 19 in. Standard Rack	12 VME64x 6U slots, 5-row connectors, peripheral cartridge for 2 Wide SCSI devices, and peripheral cartridge for CD-ROM drive, high-performance power supply, three built-in fans. Model No. R712VME64x	6U
VME64x 19 in. Industrial Rack	7 6U VME64x slots, standard 5-row connectors, central P0 connectors, rear backplane I/O extensions. Temperature controlled ventilation system, transport cover to protect boards and cables, two built-in fans. Model No. R7064x	6U
VME64x 19 in. Industrial Rack	4 6U VME64x slots, compact rear panel rackmount chassis, standard 5-row connectors, two internal 3-1/2 in. peripherals on front panel, one built-in fan. Model No. R2064x	6U
Card Cage	2-21 slot card cages for panel, rack, hanging, or table mounting. Available with numerous power supply and backplane options. Model No. C3/C6	3U 6U

TRACEWELL SYSTEMS Tel: (800) 848-4525

Function Description Size

Fan Tray 19 inch rack-mount, push-pull fan tray. This fan tray isolates each unit's airflow from those above or below. 19 in. wide, 16 in. deep, or 12 in. deep. Commercial and telecom applications 2U

Card Cages
VME / VME64x Standard 3U and 6U x 160mm card cages in 11 and 21 slots. Rugged, formed steel construction for embedded or rackmount installation. Compliant to 1101.1 or 1101.10/.11 in shielded and non-shielded versions. Custom configurations also available 3U
6U
9U

Function	Description	Size
Fan Tray	19 inch rack-mount, push-pull fan tray. This fan tray isolates each unit's airflow from those above or below. 19 in. wide, 16 in. deep, or 12 in. deep. Commercial and telecom applications	2U
Card Cages VME / VME64x	Standard 3U and 6U x 160mm card cages in 11 and 21 slots. Rugged, formed steel construction for embedded or rackmount installation. Compliant to 1101.1 or 1101.10/.11 in shielded and non-shielded versions. Custom configurations also available	3U 6U 9U

TRIPLE E CORPORATION Tel: (978) 453-0600

Function Description Size

Max-Air
Sub-Rack Patented extruded aluminum construction. Integral card guide design increases air flow 30% over conventional plastic guides. Depths from 160mm to 400mm. Finish is durable powder coat and optional EMI shielding is available 3U
6U
9U

Ruggedized
Rack Double bolted extruded aluminum assembly provides 30 G shock rating ideal for COTS applications. Depths from 160mm to 400mm. Finish is durable powder coat and optional EMI shielding is available 3U
6U
9U

VME64x
1101.10
Sub-Rack IEEE 1101.10 compliant sub-rack with patented extruded aluminum construction. All metal card guides, slot coding, 2 to 21 slots. Finish is durable powder coat 3U
6U
9U

Front
Panels Patented extruded aluminum panels with all metal ejector handles are supplied with customer cutouts. Fully assembled and powder coat finished 3U
6U
9U

Shielded
Front
Panels Patented extruded aluminum panels with all metal ejector handles. Elastomer EMI gaskets are supplied with customer cutouts. Fully assembled and powder coat finished 3U
6U
9U

VME64x
Front
Panels IEEE 1101.10 compliant eject/inject panels with slot coding, alignment pin, elastomer EMI gasketing and powder coat finish. Panels are supplied with customer cutouts and are fully assembled 3U
6U
9U

Function	Description	Size
Max-Air Sub-Rack	Patented extruded aluminum construction. Integral card guide design increases air flow 30% over conventional plastic guides. Depths from 160mm to 400mm. Finish is durable powder coat and optional EMI shielding is available	3U 6U 9U
Ruggedized Rack	Double bolted extruded aluminum assembly provides 30 G shock rating ideal for COTS applications. Depths from 160mm to 400mm. Finish is durable powder coat and optional EMI shielding is available	3U 6U 9U
VME64x 1101.10 Sub-Rack	IEEE 1101.10 compliant sub-rack with patented extruded aluminum construction. All metal card guides, slot coding, 2 to 21 slots. Finish is durable powder coat	3U 6U 9U
Front Panels	Patented extruded aluminum panels with all metal ejector handles are supplied with customer cutouts. Fully assembled and powder coat finished	3U 6U 9U
Shielded Front Panels	Patented extruded aluminum panels with all metal ejector handles. Elastomer EMI gaskets are supplied with customer cutouts. Fully assembled and powder coat finished	3U 6U 9U
VME64x Front Panels	IEEE 1101.10 compliant eject/inject panels with slot coding, alignment pin, elastomer EMI gasketing and powder coat finish. Panels are supplied with customer cutouts and are fully assembled	3U 6U 9U

VMIC Tel: (256) 880-0444, (800) 322-3616

Function Description Size

Chassis 20 slot chassis (VMIVME-120) .

Chassis 220mm, 20-slot chassis (VMIVME-120-220) .

Chassis 20-slot extruded chassis (VMIVME-200-160) .

Chassis 20-slot extruded chassis. Black (VMIVME-200-160B) .

Chassis 220mm, 20-slot extruded chassis (VMIVME-200-220) .

Chassis 20-slot extruded chassis. Black (VMIVME-200-220B) .

Chassis 21-slot chassis (VMIVME-201) 3U

VME64x
Subrack 6U x 160mm or 220mm subrack. Rear 60mm, 80mm, or 160mm Rear mount power supply capability (VMIVME-351-0XX 6U

Function	Description	Size
Chassis	20 slot chassis (VMIVME-120)	.
Chassis	220mm, 20-slot chassis (VMIVME-120-220)	.
Chassis	20-slot extruded chassis (VMIVME-200-160)	.
Chassis	20-slot extruded chassis. Black (VMIVME-200-160B)	.
Chassis	220mm, 20-slot extruded chassis (VMIVME-200-220)	.
Chassis	20-slot extruded chassis. Black (VMIVME-200-220B)	.
Chassis	21-slot chassis (VMIVME-201)	3U
VME64x Subrack	6U x 160mm or 220mm subrack. Rear 60mm, 80mm, or 160mm Rear mount power supply capability (VMIVME-351-0XX	6U

Return To VME Index By Product Function / Return To VME Directory Main Page