AITECH DEFENSE SYSTEMS

Aitech Defense Systems, Inc.
9301 Oakdale Avenue, Suite 190
Chatsworth CA 91311, USA
Telephone: (888) AITECH-8 (248-3248), (818) 350-6800
Fax: (818) 350-6888
E-mail: sales@rugged.com
http://www.rugged.com/

Aitech offers military and space-qualified, commercial off-the-shelf (COTS) products for defense, aerospace and space applications, radiation tolerant and MIL-SPEC solutions; providing VMEbus and Compact PCI boards, power subsystems, mass memory, enclosures and hardware subsystem integration along with configuration and component obsolescence management services. In addition, Aitech utilizes its broad base of off-the-shelf products and technologies to develop customer-specific solutions, deliver superior cost-performance and reliability, and expedite time to market. Applications for its products range from mission processors, fire control and mission control subsystems for ground vehicles, surface and subsurface naval platforms, tactical and strategic fixed- and rotary-wing aircraft, and low- to high-earth orbit space vehicles.

Processor Boards

Processor Type Description Software
Support ADDR/
DATA
Width Size

PowerPC
MPC7447A
(G4) Rugged Single-Slot SBC, 64bit/66MHz PCI Expansion on P0, VME64x compliant, G4+ PowerPC MPC7447A Processor, 1GHz and 1.5 GHz, 32 kB L1 and 512 kB L2 caches, up to 1GB SDRAM with ECC, 32MB Boot Flash Memory, 128MB User Flash Memory, up to 1GB Flash File Memory, 256kB NVRAM, three 10/100 Ethernet Ports, two USB 2.0 Ports, two MIL-STD-1553B Ports, ten Serial Ports (RS-232/422/485), 5 Discrete GND/Open inputs, 2 Discrete GND/Open outputs, 8 Single Ended TTL or 4 Differential RS-422 Discrete I/O Lines, two PMC Slots, eight 32-bit Timers, Watchdog Timer, Real Time Clock, 8 High Performance DMA Engines, two Temperature Sensors, Conduction and Air Cooled Versions, vibration/shock resistant. Model No. C106 VxWorks
Integrity
Linux A32:D64 6U

PowerPC
IBM 750GX Rugged Single-Slot SBC, VME64x compliant, PowerPC 750GX up to 800MHz Processor, Power Consumption less than 17 W @ 800MHz, On-chip 32kB L1 and 1MB L2 caches, up to 1GB SDRAM with ECC, 32MB Boot Flash Memory, 128MB User Flash Memory, up to 1GB Flash File Memory, 32kB NVRAM, 8 High Performance DMA Engines, Gigabit Ethernet Port, two Fast Ethernet Ports, two 1394a FireWire Ports, two USB 2.0 Ports, two dual redundant MIL-STD-1553B Ports, six Multi-Protocol High-Speed Serial Ports (RS-232/422/485), two Standard UART Ports (RS-232/422/485), 16 Single Ended TTL/8 Differential, RS-422 Discrete I/O Lines, two IEEE 1386-2001 or ANSI/VITA 20-2001 Compliant PMC Slots, eight 32-bit Timers, Watchdog Timer, Real Time Clock, Fully VME64 Compliant, Conduction and Air Cooled Versions, Vibration/Shock Resistant. Model No C103 VxWorks A32:D64 6U

PowerPC
MPC7450/
7455 (G4) Rugged Single-Slot SBC, PowerPC G4+ 7455 Processor, 733MHz, On-chip 32kB L1 and 256kB L2 Caches, up to 2MB L3 Cache, up to 1GB SDRAM with ECC, 16MB Boot Flash Memory, 64MB User Flash Memory, up to 1GB Flash File Memory, 3 kB NVRAM, 8 High Performance DMA Engines, Gigabit Ethernet Port, two Fast Ethernet Ports, two 1394a FireWire Ports, two USB 2.0 Ports, two dual redundant MIL-STD-1553B Ports, six Multi-Protocol High-Speed Serial Ports (RS-232/422/485), two Standard UART Ports (RS-232/422/485), 16 Single Ended TTL/8 Differential RS-422 Discrete I/O Lines, two IEEE 1386-2001 or ANSI/VITA 20-2001 Compliant PMC Slots, eight 32-bit Timers, Watchdog Timer, Real Time Clock, VME64x Compliant, Conduction and Air Cooled Versions, Vibration/Shock Resistant. Model No C100 VxWorks
Integrity
Linux A32:D64 6U

PowerPC
MPC7400
(G4) or
PowerPC
MPC750
(G3) Rugged, extended temp Motorola MVME-5110 single-slot SBC, conduction-cooled (IEEE 1101.2) or air-cooled formats, dual PMC slots for I/O expansion (IEEE 1386.1 compliant), ANSIVITA VME64 compliant, accommodates standard or custom transition modules, rugged and military operating temp ranges, vibration resistant: up to 7.62 G RMS, shock resistant: 30 G during 11 msec, conformally coated, available with MPC7400 (G4) or MPC750 (G3) PowerPC processors, based on PowerPlus II architecture, 1MB or 2 MB L2 cache, up to 512 MB of ECC SDRAM, expandable to 1GB, 16MB of User Flash memory, PCI interface 3.0 compliant, two Ethernet interfaces (10/100 Mb/s), two async serial interfaces, four timers and watchdog. Model No. C5110 VxWorks
Linux
AIX A32:D64 6U

Processor Type	Description	Software Support	ADDR/ DATA Width	Size
PowerPC MPC7447A (G4)	Rugged Single-Slot SBC, 64bit/66MHz PCI Expansion on P0, VME64x compliant, G4+ PowerPC MPC7447A Processor, 1GHz and 1.5 GHz, 32 kB L1 and 512 kB L2 caches, up to 1GB SDRAM with ECC, 32MB Boot Flash Memory, 128MB User Flash Memory, up to 1GB Flash File Memory, 256kB NVRAM, three 10/100 Ethernet Ports, two USB 2.0 Ports, two MIL-STD-1553B Ports, ten Serial Ports (RS-232/422/485), 5 Discrete GND/Open inputs, 2 Discrete GND/Open outputs, 8 Single Ended TTL or 4 Differential RS-422 Discrete I/O Lines, two PMC Slots, eight 32-bit Timers, Watchdog Timer, Real Time Clock, 8 High Performance DMA Engines, two Temperature Sensors, Conduction and Air Cooled Versions, vibration/shock resistant. Model No. C106	VxWorks Integrity Linux	A32:D64	6U
PowerPC IBM 750GX	Rugged Single-Slot SBC, VME64x compliant, PowerPC 750GX up to 800MHz Processor, Power Consumption less than 17 W @ 800MHz, On-chip 32kB L1 and 1MB L2 caches, up to 1GB SDRAM with ECC, 32MB Boot Flash Memory, 128MB User Flash Memory, up to 1GB Flash File Memory, 32kB NVRAM, 8 High Performance DMA Engines, Gigabit Ethernet Port, two Fast Ethernet Ports, two 1394a FireWire Ports, two USB 2.0 Ports, two dual redundant MIL-STD-1553B Ports, six Multi-Protocol High-Speed Serial Ports (RS-232/422/485), two Standard UART Ports (RS-232/422/485), 16 Single Ended TTL/8 Differential, RS-422 Discrete I/O Lines, two IEEE 1386-2001 or ANSI/VITA 20-2001 Compliant PMC Slots, eight 32-bit Timers, Watchdog Timer, Real Time Clock, Fully VME64 Compliant, Conduction and Air Cooled Versions, Vibration/Shock Resistant. Model No C103	VxWorks	A32:D64	6U
PowerPC MPC7450/ 7455 (G4)	Rugged Single-Slot SBC, PowerPC G4+ 7455 Processor, 733MHz, On-chip 32kB L1 and 256kB L2 Caches, up to 2MB L3 Cache, up to 1GB SDRAM with ECC, 16MB Boot Flash Memory, 64MB User Flash Memory, up to 1GB Flash File Memory, 3 kB NVRAM, 8 High Performance DMA Engines, Gigabit Ethernet Port, two Fast Ethernet Ports, two 1394a FireWire Ports, two USB 2.0 Ports, two dual redundant MIL-STD-1553B Ports, six Multi-Protocol High-Speed Serial Ports (RS-232/422/485), two Standard UART Ports (RS-232/422/485), 16 Single Ended TTL/8 Differential RS-422 Discrete I/O Lines, two IEEE 1386-2001 or ANSI/VITA 20-2001 Compliant PMC Slots, eight 32-bit Timers, Watchdog Timer, Real Time Clock, VME64x Compliant, Conduction and Air Cooled Versions, Vibration/Shock Resistant. Model No C100	VxWorks Integrity Linux	A32:D64	6U
PowerPC MPC7400 (G4) or PowerPC MPC750 (G3)	Rugged, extended temp Motorola MVME-5110 single-slot SBC, conduction-cooled (IEEE 1101.2) or air-cooled formats, dual PMC slots for I/O expansion (IEEE 1386.1 compliant), ANSIVITA VME64 compliant, accommodates standard or custom transition modules, rugged and military operating temp ranges, vibration resistant: up to 7.62 G RMS, shock resistant: 30 G during 11 msec, conformally coated, available with MPC7400 (G4) or MPC750 (G3) PowerPC processors, based on PowerPlus II architecture, 1MB or 2 MB L2 cache, up to 512 MB of ECC SDRAM, expandable to 1GB, 16MB of User Flash memory, PCI interface 3.0 compliant, two Ethernet interfaces (10/100 Mb/s), two async serial interfaces, four timers and watchdog. Model No. C5110	VxWorks Linux AIX	A32:D64	6U

Memory Boards

Memory Type Memory Amount Description ADDR/
DATA
Width Size

High Density
Flash
and SRAM Up to
64MB
SRAM
Up to
448MB
Flash On-board programming for Flash, full featured VME64x slave interface (ANSI/IEEE 1014-1987), ANSI/VITA 1-1994 VME64 compliance, 3 ruggedization levels: military, rugged, and commercial, battery or super capacitor SRAM backup, single slot air convection or conduction cooled, IEEE 1101.2 compliant mechanical format, extended operating temp range, shock and vibration resistant. Model No. C211 A32:D32 6U

High Density
Flash Up to
128GB
NAND
Flash Up to 128 GB NAND Flash memory in 32 Banks, 20 MB/sec transfer rate (BLT Mode), VME slave interface, implemented in a high performance FPGA, low power consumption, interleaved memory access, Flash Memory Manager software support provides: full file system read/write emulation, wear leveling, automatic block management, memory interleaving. IEEE 1101.2 compliant mechanical format, extended operating temp range, shock and vibration resistant. Model No. C212 A32:D32 6U

Memory Type	Memory Amount	Description	ADDR/ DATA Width	Size
High Density Flash and SRAM	Up to 64MB SRAM Up to 448MB Flash	On-board programming for Flash, full featured VME64x slave interface (ANSI/IEEE 1014-1987), ANSI/VITA 1-1994 VME64 compliance, 3 ruggedization levels: military, rugged, and commercial, battery or super capacitor SRAM backup, single slot air convection or conduction cooled, IEEE 1101.2 compliant mechanical format, extended operating temp range, shock and vibration resistant. Model No. C211	A32:D32	6U
High Density Flash	Up to 128GB NAND Flash	Up to 128 GB NAND Flash memory in 32 Banks, 20 MB/sec transfer rate (BLT Mode), VME slave interface, implemented in a high performance FPGA, low power consumption, interleaved memory access, Flash Memory Manager software support provides: full file system read/write emulation, wear leveling, automatic block management, memory interleaving. IEEE 1101.2 compliant mechanical format, extended operating temp range, shock and vibration resistant. Model No. C212	A32:D32	6U

Analog I/O Boards

Function Description Software
Support ADDR/
DATA
Width Size

Analog I/O 50 Analog Input Channels, 16-bit A/D Conversions at 100Ksps, 12 Diff or 24 Single-Ended Analog Input Chan with ±10V Input Range, 12 Single-Ended Input Chan with ±15V Input Range, 6 Single-Ended Input Chan with ±28V Input Range, High Gain Input Chan: 4 Instrument Amplifier Chan, Gain=100; or, 8 Single-Ended Chan, Gain=6.25, Anti-alias Filter for all Analog Input Chan, 128x16-bit Storage for each Analog Input Chan, 12-bit D/A Converter, 8 Single-Ended Analog Output Chan with ±10V Output Range, Redundant BIT Path for all External Analog Inputs using 12-bit dedicated ADC, Interrupt Capabilities using PCI Interrupt Pins, PCI 2.1 Interface Compliant, 32 bit @ 33 MHz PCI Bus Interface, One Time Conversion of all Analog Input Initiated by Hardware or Software Triggers, Air-Cooled or Conduction-Cooled Versiosn, three ruggedization levels, BIT (Built-in-Test) Avail for Functional Testability. Model No M453 VxWorks A64:D32 6U

Function	Description	Software Support	ADDR/ DATA Width	Size
Analog I/O	50 Analog Input Channels, 16-bit A/D Conversions at 100Ksps, 12 Diff or 24 Single-Ended Analog Input Chan with ±10V Input Range, 12 Single-Ended Input Chan with ±15V Input Range, 6 Single-Ended Input Chan with ±28V Input Range, High Gain Input Chan: 4 Instrument Amplifier Chan, Gain=100; or, 8 Single-Ended Chan, Gain=6.25, Anti-alias Filter for all Analog Input Chan, 128x16-bit Storage for each Analog Input Chan, 12-bit D/A Converter, 8 Single-Ended Analog Output Chan with ±10V Output Range, Redundant BIT Path for all External Analog Inputs using 12-bit dedicated ADC, Interrupt Capabilities using PCI Interrupt Pins, PCI 2.1 Interface Compliant, 32 bit @ 33 MHz PCI Bus Interface, One Time Conversion of all Analog Input Initiated by Hardware or Software Triggers, Air-Cooled or Conduction-Cooled Versiosn, three ruggedization levels, BIT (Built-in-Test) Avail for Functional Testability. Model No M453	VxWorks	A64:D32	6U

Digital I/O Boards

Function Description Software
Support ADDR/DATA
Width Size

Parallel I/O 64 Channels of TTL or 32 Channels of RS-422/485 Differential I/O, all channels software configurable to be TTL or Differential and Inputs or Outputs, Opt: four RS-232/422/485 UART Serial Ports capable of BAUD fates up to 115.2 kbps, interrupt capabilities using PCI interrupt pins, programmable interrupts from external TTL or differential inputs, PCI Rev. 2.1 compliant supporting 32-bit @ 33MHz operation, air-cooled or conduction-cooled versions, three ruggedization levels, BIT (Built-in-Test) coverage for complete functional testability. Model No. M451 VxWorks . 6U

A/D,D/A and
Digital I/O 16 Diff/32 Single Ended 16-bit A/D Input Channels, 2 Diff, 12-bit, isolated A/D Input Chan, up to eight 16-Bit D/A Chan, up to thirty-two 14-Bit D/A Chan, 48 Opto-Isolated Digital I/O Cells, each digital I/O cell can be factory configured as Input or Output, Output Drive up to 1A, factory configurable input threshold levels, 16 opto-isolated Digital Input Chan designed for switch activation, VME Slave Interface implemented in a high performance FPGA, all digital and analog I/O signals are available at the VME P2 and P0 connectors, low power consumption 8W, On-board A/D, D/A Loopbacks and high precision reference voltage sources, conduction and air cooled versions, vibration/shock resistant. Model No. C431 VxWorks . 6U

Multi I/O 192 Channels of Discrete Input Output Interfaces in three groups of 64, configurable as: up to 32 Differential Digital Input/Output Chan or up to 64 TTL Digital Input/Output Chan. 64 TTL Digital Input/Output Chan; 8 high-side MOSFET switches, 8 low-side MOSFET switches, 48 isolated low-side MOSFET switches with 6 independent returns for each group of 8 chan. Conduction/Air Cooled, extensive software BIT routines, VME64x Bus Slave Interface (A24/D32). Model No. C430 VxWorks . 6U

ARINC and
Multi I/O Rugged I/O Board, discrete I/O channels, analog I/O channels, ARINC-439 receivers and line drivers, plus one stereo audio output, Conduction Cooled board is compliant with IEEE 1101.2. Low power consumption. Model No. C437 VxWorks . 6U

Function	Description	Software Support	ADDR/DATA Width	Size
Parallel I/O	64 Channels of TTL or 32 Channels of RS-422/485 Differential I/O, all channels software configurable to be TTL or Differential and Inputs or Outputs, Opt: four RS-232/422/485 UART Serial Ports capable of BAUD fates up to 115.2 kbps, interrupt capabilities using PCI interrupt pins, programmable interrupts from external TTL or differential inputs, PCI Rev. 2.1 compliant supporting 32-bit @ 33MHz operation, air-cooled or conduction-cooled versions, three ruggedization levels, BIT (Built-in-Test) coverage for complete functional testability. Model No. M451	VxWorks	.	6U
A/D,D/A and Digital I/O	16 Diff/32 Single Ended 16-bit A/D Input Channels, 2 Diff, 12-bit, isolated A/D Input Chan, up to eight 16-Bit D/A Chan, up to thirty-two 14-Bit D/A Chan, 48 Opto-Isolated Digital I/O Cells, each digital I/O cell can be factory configured as Input or Output, Output Drive up to 1A, factory configurable input threshold levels, 16 opto-isolated Digital Input Chan designed for switch activation, VME Slave Interface implemented in a high performance FPGA, all digital and analog I/O signals are available at the VME P2 and P0 connectors, low power consumption 8W, On-board A/D, D/A Loopbacks and high precision reference voltage sources, conduction and air cooled versions, vibration/shock resistant. Model No. C431	VxWorks	.	6U
Multi I/O	192 Channels of Discrete Input Output Interfaces in three groups of 64, configurable as: up to 32 Differential Digital Input/Output Chan or up to 64 TTL Digital Input/Output Chan. 64 TTL Digital Input/Output Chan; 8 high-side MOSFET switches, 8 low-side MOSFET switches, 48 isolated low-side MOSFET switches with 6 independent returns for each group of 8 chan. Conduction/Air Cooled, extensive software BIT routines, VME64x Bus Slave Interface (A24/D32). Model No. C430	VxWorks	.	6U
ARINC and Multi I/O	Rugged I/O Board, discrete I/O channels, analog I/O channels, ARINC-439 receivers and line drivers, plus one stereo audio output, Conduction Cooled board is compliant with IEEE 1101.2. Low power consumption. Model No. C437	VxWorks	.	6U

Powered Enclosures

Configuration Available
Slots Description Size

Rugged
Enclosure 1 For mobile military applications, designed for harsh mechanical, climatic, chemical and electrical stresses, environmentally sealed, compact and lightweight with a single 6U VME64x, internally conduction-cooled; externally convection and radiation cooled, optional wire rope vibration isolators with two mounting configurations, optional: cold plate conduction cooling, fully sealed Faraday cage and complete EMI/RFI power line filtering, customized I/O harnessing and font panel, multi-output integral 28 VDC input power supply, customized card access panel, optional PCMCIA card access door. Model No. E118 6U

Rugged
Enclosure 2 For mobile military applications, designed for harsh mechanical, climatic, chemical and electrical stresses, environmentally sealed, compact and lightweight with two 6U VME64x, internally conduction-cooled; externally convection and radiation cooled, optional wire rope vibration isolators with two mounting configurations, optional: cold plate conduction cooling, fully sealed Faraday cage and complete EMI/RFI power line filtering, customized I/O harnessing and font panel, multi-output integral 28 VDC input power supply, customized card access panel, optional PCMCIA card access door. Model No. E119 6U

1/2 ATR
Short 5 Lightweight VME64x enclosure, internally conduction-cooled; externally radiation and convection cooled, environmentally sealed, fully sealed Faraday cage and complete EMI/RFI power line filtering, customized front panel connectors and internal wiring. Model No. E103 6U

1/2 ATR
Short
Cold Plate 5 Lightweight VME64x enclosure, internally conduction-cooled; externally cold plate cooled, environmentally sealed, radiation tolerant power supply optional, fully sealed Faraday cage and complete EMI/RFI power line filtering, customized front panel connectors and internal wiring. Model No. E104 6U

Full-ATR
Long 15 VME64x enclosure, fully sealed Faraday cage and complete EMI/RFI power line filtering, customized front panel connectors and internal wiring. Model No. E111 .

Full-ATR
Short 9 VME64x enclosure, internally conduction-cooled; externally forced air-cooled, environmentally sealed, fully sealed Faraday cage and complete EMI/RFI power line filtering, customized front panel connectors and internal wiring. Model No. E112 9

Compact
Full-ATR
Short 7 Lightweight VME64x enclosure designed for use in small spaces, internally conduction cooled; externally radiation and convection cooled, environmentally sealed, fully sealed Faraday cage and complete EMI/RFI power line filtering, customized front panel connectors and internal wiring. Model No. E115 6U

3/4 ATR
Short 8 Lightweight VME64x enclosure designed for use in small spaces, internally conduction cooled; externally radiation and convection cooled, environmentally sealed, fully sealed Faraday cage and complete EMI/RFI power line filtering, customized front panel connectors and internal wiring. Model No. E120 6U

Configuration	Available Slots	Description	Size
Rugged Enclosure	1	For mobile military applications, designed for harsh mechanical, climatic, chemical and electrical stresses, environmentally sealed, compact and lightweight with a single 6U VME64x, internally conduction-cooled; externally convection and radiation cooled, optional wire rope vibration isolators with two mounting configurations, optional: cold plate conduction cooling, fully sealed Faraday cage and complete EMI/RFI power line filtering, customized I/O harnessing and font panel, multi-output integral 28 VDC input power supply, customized card access panel, optional PCMCIA card access door. Model No. E118	6U
Rugged Enclosure	2	For mobile military applications, designed for harsh mechanical, climatic, chemical and electrical stresses, environmentally sealed, compact and lightweight with two 6U VME64x, internally conduction-cooled; externally convection and radiation cooled, optional wire rope vibration isolators with two mounting configurations, optional: cold plate conduction cooling, fully sealed Faraday cage and complete EMI/RFI power line filtering, customized I/O harnessing and font panel, multi-output integral 28 VDC input power supply, customized card access panel, optional PCMCIA card access door. Model No. E119	6U
1/2 ATR Short	5	Lightweight VME64x enclosure, internally conduction-cooled; externally radiation and convection cooled, environmentally sealed, fully sealed Faraday cage and complete EMI/RFI power line filtering, customized front panel connectors and internal wiring. Model No. E103	6U
1/2 ATR Short Cold Plate	5	Lightweight VME64x enclosure, internally conduction-cooled; externally cold plate cooled, environmentally sealed, radiation tolerant power supply optional, fully sealed Faraday cage and complete EMI/RFI power line filtering, customized front panel connectors and internal wiring. Model No. E104	6U
Full-ATR Long	15	VME64x enclosure, fully sealed Faraday cage and complete EMI/RFI power line filtering, customized front panel connectors and internal wiring. Model No. E111	.
Full-ATR Short	9	VME64x enclosure, internally conduction-cooled; externally forced air-cooled, environmentally sealed, fully sealed Faraday cage and complete EMI/RFI power line filtering, customized front panel connectors and internal wiring. Model No. E112	9
Compact Full-ATR Short	7	Lightweight VME64x enclosure designed for use in small spaces, internally conduction cooled; externally radiation and convection cooled, environmentally sealed, fully sealed Faraday cage and complete EMI/RFI power line filtering, customized front panel connectors and internal wiring. Model No. E115	6U
3/4 ATR Short	8	Lightweight VME64x enclosure designed for use in small spaces, internally conduction cooled; externally radiation and convection cooled, environmentally sealed, fully sealed Faraday cage and complete EMI/RFI power line filtering, customized front panel connectors and internal wiring. Model No. E120	6U

Power Supplies

Type Voltage/Current Description

Rugged 6U
Power Supply +5V/50A
±12V/2.5A(ea) 300 Watt output with greater than 75% efficiency, 18-36 Volt DC input range, input transient and reverse polarity protection, EMI/RFI input filter, output over-voltage and short-circuit protection, ACFAIL output signal with 4 ms holdup time, input/output and chassis isolation, thermal shutdown, fan control circuit. Model No. P216

Rugged 3U
Power Supply +5V/20A
3.3V/11A
±12V/1.0A(ea) 160 Watt output with greater than 75% efficiency, 18-36 Volt DC input range, input transient and reverse polarity protection, EMI/RFI input filter, output over-voltage and short-circuit protection, optional: ACFAIL, SYSRST and SYSFAIL output signals with holdup time, input/output and chassis isolation, thermal shutdown, remote ON/OFF capability. Model No. P217

6U VME64x
Power Supply +5.0V/30A
±12V/1.25A(ea)
+3.3V /9A Outputs: 250W of 5V, 60W of 3.3V, and ±12 V. Four reference voltage outputs (+2.0, +5.0, ±10.0 Vdc). 250 Watt output VME64x power supply; 18-36 Volt DC input range; 28Vdc input power source per MIL-STD-1275 and MIL-STD-704; input transient and reverse polarity protection; integral EMI/RFI input filter; output over-voltage and short-circuit protection; ACFAIL output signal with 4 ms holdup time; input/output and chassis isolation; thermal shutdown; fan control circuit. Other output voltages available including ±10V, +2V, +5V (Ref). Model No. P220.

6U VME64x
Power Supply +5.0V/30A
+3.3V/12A
±12V/1A(ea) 175 Watt Output with greater than 75% efficiency, 16-36 Volt DC Input Range with drop to 14V for 45 Sec., MIL-STD-704A and D Input compliance, EMI/RFI input filter and input transient protection, Outputs: 5V @ 30A, ±12V @ 1.0A each, 3.3V @ 12A, output over/undervoltage and short-circuit protections, ACFAIL, SYSRST and ~YSFAIL VME output signals, 50 ms Holdup time, input/output and chassis isolation, thermal shutdown and reverse polarity protection, external On/Off control, DC fan output drive and control, internal BIT status and alarms for voltages, currents, and temperatures. Model No. P221

Type	Voltage/Current	Description
Rugged 6U Power Supply	+5V/50A ±12V/2.5A(ea)	300 Watt output with greater than 75% efficiency, 18-36 Volt DC input range, input transient and reverse polarity protection, EMI/RFI input filter, output over-voltage and short-circuit protection, ACFAIL output signal with 4 ms holdup time, input/output and chassis isolation, thermal shutdown, fan control circuit. Model No. P216
Rugged 3U Power Supply	+5V/20A 3.3V/11A ±12V/1.0A(ea)	160 Watt output with greater than 75% efficiency, 18-36 Volt DC input range, input transient and reverse polarity protection, EMI/RFI input filter, output over-voltage and short-circuit protection, optional: ACFAIL, SYSRST and SYSFAIL output signals with holdup time, input/output and chassis isolation, thermal shutdown, remote ON/OFF capability. Model No. P217
6U VME64x Power Supply	+5.0V/30A ±12V/1.25A(ea) +3.3V /9A	Outputs: 250W of 5V, 60W of 3.3V, and ±12 V. Four reference voltage outputs (+2.0, +5.0, ±10.0 Vdc). 250 Watt output VME64x power supply; 18-36 Volt DC input range; 28Vdc input power source per MIL-STD-1275 and MIL-STD-704; input transient and reverse polarity protection; integral EMI/RFI input filter; output over-voltage and short-circuit protection; ACFAIL output signal with 4 ms holdup time; input/output and chassis isolation; thermal shutdown; fan control circuit. Other output voltages available including ±10V, +2V, +5V (Ref). Model No. P220.
6U VME64x Power Supply	+5.0V/30A +3.3V/12A ±12V/1A(ea)	175 Watt Output with greater than 75% efficiency, 16-36 Volt DC Input Range with drop to 14V for 45 Sec., MIL-STD-704A and D Input compliance, EMI/RFI input filter and input transient protection, Outputs: 5V @ 30A, ±12V @ 1.0A each, 3.3V @ 12A, output over/undervoltage and short-circuit protections, ACFAIL, SYSRST and ~YSFAIL VME output signals, 50 ms Holdup time, input/output and chassis isolation, thermal shutdown and reverse polarity protection, external On/Off control, DC fan output drive and control, internal BIT status and alarms for voltages, currents, and temperatures. Model No. P221

PMC Mezzanine Modules

Function Description

PMC Carrier
Expansion
Card 64-bit 66 MHz PCI expansion bus on P0 for up to 2 conduction-cooled PMC sites. Model No. C300

MIL-STD-1553B Dual MIL-STD-1553B to PCI/PMC. Model No. M703

CameraLink
Frame
Grabber Acquires and processes CameraLink digital video data from any CameraLink compliant camera. CameraLink interface may be routed to a CameraLink-compliant 3M connector at the front panel or to PMC I/O connector. Supports base configuration - single channel link, single cable connector. Integrated UART port for camera control and four camera control signal pairs (CC1-CC4). Supports high frame rate grabbing capability (over 50 Fps) and incorporates on board hardware image-processing engine supported by two separated memory arrays. Conduction and air-cooled versions. Model No. M570

Graphics Features Permidia3 Graphic Accelerator capable of 2D, 3D and video overlay graphic processing supported by 32 Mbytes of SDRAM graphic memory. Provides RGBHV, DVI flat panel (TMDS) and LVDS non-interlaced outputs as well as NTSC/PAL composite/S-Video interlaced outputs. Accepts up to 8 composite composite/S-Video video inputs for overlay functionality. Available with drivers for standard VGA (WindML), OpenGL/X11 and video overlay. Conduction and air-cooled versions. Model No. M580

MPEG-2 Decoder Integrates real time MPEG-1 and MPEG-2 decoder supporting program and transport streams, composite and S-Video output video and stereo audio output through front panel or PMC I/O connector. Compliant with ISO 11172 (MPEG-1) and ISO 13818 (MPEG-2). Conduction and air-cooled versions. Model No. M550

Telemetry,
Serial &
Parallel I/O Based on MPC8260 PowerQUICC II Communication Controller. Supports IRIG 106 standard PCM data structure and signal specifications compliance at data rates to 5Mbps, three RS-422 serial channels capable of synch and asynch operations at rates to 2.5Mbps and 23 separately programmable differential RS-422 parallel I/O channels (16 are interrupt capable). All I/O routed to PMC I/O connector. Conduction and air-cooled versions. Model No. M457

Dual
MIL-STD1553B
and Serial I/O Integrates two dual redundant MIL-STD-1553B BC\RT\MT channels and four UART ports supporting RS-422/232/485. Each 1553B controller includes 64kx16 shared RAM and may be independently configured as direct or transformer coupled. Conduction and air-cooled versions (also radiation tolerant). Model No. M703

Quad
Ethernet
Interface
(10/100 Mb/s)
and Hub Integrates four IEEE 802.3/802.3u 10BASE-T/100BASE-Tx Ethernet channels and four port Ethernet repeater (Hub). All channels may be routed to either the front panel or PMC I/O connector. Conduction and air-cooled versions. Model No. M610

Function	Description
PMC Carrier Expansion Card	64-bit 66 MHz PCI expansion bus on P0 for up to 2 conduction-cooled PMC sites. Model No. C300
MIL-STD-1553B	Dual MIL-STD-1553B to PCI/PMC. Model No. M703
CameraLink Frame Grabber	Acquires and processes CameraLink digital video data from any CameraLink compliant camera. CameraLink interface may be routed to a CameraLink-compliant 3M connector at the front panel or to PMC I/O connector. Supports base configuration - single channel link, single cable connector. Integrated UART port for camera control and four camera control signal pairs (CC1-CC4). Supports high frame rate grabbing capability (over 50 Fps) and incorporates on board hardware image-processing engine supported by two separated memory arrays. Conduction and air-cooled versions. Model No. M570
Graphics	Features Permidia3 Graphic Accelerator capable of 2D, 3D and video overlay graphic processing supported by 32 Mbytes of SDRAM graphic memory. Provides RGBHV, DVI flat panel (TMDS) and LVDS non-interlaced outputs as well as NTSC/PAL composite/S-Video interlaced outputs. Accepts up to 8 composite composite/S-Video video inputs for overlay functionality. Available with drivers for standard VGA (WindML), OpenGL/X11 and video overlay. Conduction and air-cooled versions. Model No. M580
MPEG-2 Decoder	Integrates real time MPEG-1 and MPEG-2 decoder supporting program and transport streams, composite and S-Video output video and stereo audio output through front panel or PMC I/O connector. Compliant with ISO 11172 (MPEG-1) and ISO 13818 (MPEG-2). Conduction and air-cooled versions. Model No. M550
Telemetry, Serial & Parallel I/O	Based on MPC8260 PowerQUICC II Communication Controller. Supports IRIG 106 standard PCM data structure and signal specifications compliance at data rates to 5Mbps, three RS-422 serial channels capable of synch and asynch operations at rates to 2.5Mbps and 23 separately programmable differential RS-422 parallel I/O channels (16 are interrupt capable). All I/O routed to PMC I/O connector. Conduction and air-cooled versions. Model No. M457
Dual MIL-STD1553B and Serial I/O	Integrates two dual redundant MIL-STD-1553B BC\RT\MT channels and four UART ports supporting RS-422/232/485. Each 1553B controller includes 64kx16 shared RAM and may be independently configured as direct or transformer coupled. Conduction and air-cooled versions (also radiation tolerant). Model No. M703
Quad Ethernet Interface (10/100 Mb/s) and Hub	Integrates four IEEE 802.3/802.3u 10BASE-T/100BASE-Tx Ethernet channels and four port Ethernet repeater (Hub). All channels may be routed to either the front panel or PMC I/O connector. Conduction and air-cooled versions. Model No. M610

Return to List of Vendors

Go to Product Function Index