BUSTRONIC CORPORATION

Bustronic Corporation
44350 Grimmer Blvd.
Fremont, CA 94538, USA
Telephone: (510) 490-7388
Fax: (510) 490-1853
Email: aniksadat@bustronic.com
http://www.bustronic.com

Sales/Marketing: Justin Moll
Applications/Technical: Ed Cypret

Since 1989, Bustronic Corporation has become recognized as an industry leader in the design and manufacture of both standard and custom, high performance electronic packaging products. Our expanding line of backplanes, bus extension overlays, extenders, chassis and other accessories for the more popular computer busses are used worldwide. We support VME320, VME64x, VME64, VME, VXI, SUN, CPCI and more. Our design team has been involved in backplane products since before the advent of the VME specification and offers our customers rapid, expert assistance in solving their requirements for custom high performance backplanes and accessories.

Products listed in the following categories: Backplanes, Live Insertion Products

Backplanes

Configuration Description Size

VME64x 3-21 slots, 12 layers, 160 pin VME64 Extension connectors J1 and J2 plus J0. Built-in active electronic daisy chain (EDC), on-board termination, distributed high and low frequency decoupling capacitors, hot swap capable when used with Bustronic hot swap extender. 7U design provides maximum power, easy wire harnessing. Shrouds compatible with J1, J2 and J0. Model No. 101V64XMXX-XXXX 7U

VME320 6, 7, 9, 12, 15, 20 and 21 slots. 10-14 layers depending on features and slot count, 160 pin VME Extension connectors J1 and J2 plus J0. True 320Mbyte/s data rate. VME64x compatible, auto daisy chain available, hot swap capable when used with Bustronic hot swap extender. On-board termination, supports source synchronous data transfers, 100 percent compatible with legacy VME boards. Distributed high and low frequency decoupling capacitors. Model No. 101V320MXX-XXXX 6U

VXS 12 slots, Dual Star configuration, compliant to VITA 41.0 specification, two hub slots and 10 payload slots. Nelco-4000-13SI material, 18 layer stripline design, 7U height .

J1/J2 Monolithic
and J1/J2 Discrete 8-layer w/Stripline construction, outer layers grnd only, RFI/EMI shielding, matched signal line impedance 74 Ohm. Onboard, inboard termination. High speed decoupling capacitors every slot, low spd decoupling capacitors, Automatic Daisy Chaining available 6U

. J1/J2 Monolithic, 3-21 slots. Model No. 101VMEM1XX 6U

. J1, 3-21 slots. Model No. 101VMEJ1XX 3U

. J2, 3-21 slots. Model No. 101VMEJ2XX 3U

. J2 Development Backplane, power and ground only, 3-21 slots. Model No. 101PNGJ2XX 3U

VME64 Contact factory for slot sizes available. 8 layer, true stripline construction. 160 pin VME Extension connector compatible, outer layers ground only providing RFI/EMI shielding, distributed high and low frequency decoupling capacitors, various power input options. Model No. 101VME64XX-XXXX 7U

J3 Sun compatible power and ground, 3-21 slots. Model No. 101PNGJ3XX 3U

Sun J2 Busses 'A' and 'C' rows, meets requirements of VMEbus J2, 3-21 slots. Model No. 101SBPJ2XX 3U

VSB Overlay Modules upgrade existing VME J2 backplanes to include signal bussing for VSB Rev A.1. Geographic address is user programmable. 2-6 slots. Model No. 1340VLJ2XX 3U

Sun J2 Overlay Used to upgrade standard J2 backplane to include Sun proprietary bussing on 'A' and 'C' rows, 2-6 slots. Model No. 1320VLJ2XX 3U

Sun J3 Overlay Implements Sun J3 proprietary bus on Sun J3 power & ground backplane, 2-6 slots. Model No. 1320VLJ3XX 3U

Terminator For J1 or J2 VME backplane .

Terminator For Sun SPARC 1E .

J0 Backplane For development, all pins unbussed, 17mm tails for wirewrapping, opt. shrouds for overlays, replaces Z-rail for DIN connector mounting, completely user definable, 1-21 slots. Model No. 101CMBJ0XX 3U

Interconnects Connects two J1 backplanes, Model No. 101JMPJ101, or two J2 backplanes, Model No. 101JMPJ201 .

Custom Custom backplanes for VME, VME64x, VXS, and other backplanes .

Configuration	Description	Size
VME64x	3-21 slots, 12 layers, 160 pin VME64 Extension connectors J1 and J2 plus J0. Built-in active electronic daisy chain (EDC), on-board termination, distributed high and low frequency decoupling capacitors, hot swap capable when used with Bustronic hot swap extender. 7U design provides maximum power, easy wire harnessing. Shrouds compatible with J1, J2 and J0. Model No. 101V64XMXX-XXXX	7U
VME320	6, 7, 9, 12, 15, 20 and 21 slots. 10-14 layers depending on features and slot count, 160 pin VME Extension connectors J1 and J2 plus J0. True 320Mbyte/s data rate. VME64x compatible, auto daisy chain available, hot swap capable when used with Bustronic hot swap extender. On-board termination, supports source synchronous data transfers, 100 percent compatible with legacy VME boards. Distributed high and low frequency decoupling capacitors. Model No. 101V320MXX-XXXX	6U
VXS	12 slots, Dual Star configuration, compliant to VITA 41.0 specification, two hub slots and 10 payload slots. Nelco-4000-13SI material, 18 layer stripline design, 7U height	.
J1/J2 Monolithic and J1/J2 Discrete	8-layer w/Stripline construction, outer layers grnd only, RFI/EMI shielding, matched signal line impedance 74 Ohm. Onboard, inboard termination. High speed decoupling capacitors every slot, low spd decoupling capacitors, Automatic Daisy Chaining available	6U
.	J1/J2 Monolithic, 3-21 slots. Model No. 101VMEM1XX	6U
.	J1, 3-21 slots. Model No. 101VMEJ1XX	3U
.	J2, 3-21 slots. Model No. 101VMEJ2XX	3U
.	J2 Development Backplane, power and ground only, 3-21 slots. Model No. 101PNGJ2XX	3U
VME64	Contact factory for slot sizes available. 8 layer, true stripline construction. 160 pin VME Extension connector compatible, outer layers ground only providing RFI/EMI shielding, distributed high and low frequency decoupling capacitors, various power input options. Model No. 101VME64XX-XXXX	7U
J3	Sun compatible power and ground, 3-21 slots. Model No. 101PNGJ3XX	3U
Sun J2	Busses 'A' and 'C' rows, meets requirements of VMEbus J2, 3-21 slots. Model No. 101SBPJ2XX	3U
VSB Overlay	Modules upgrade existing VME J2 backplanes to include signal bussing for VSB Rev A.1. Geographic address is user programmable. 2-6 slots. Model No. 1340VLJ2XX	3U
Sun J2 Overlay	Used to upgrade standard J2 backplane to include Sun proprietary bussing on 'A' and 'C' rows, 2-6 slots. Model No. 1320VLJ2XX	3U
Sun J3 Overlay	Implements Sun J3 proprietary bus on Sun J3 power & ground backplane, 2-6 slots. Model No. 1320VLJ3XX	3U
Terminator	For J1 or J2 VME backplane	.
Terminator	For Sun SPARC 1E	.
J0 Backplane	For development, all pins unbussed, 17mm tails for wirewrapping, opt. shrouds for overlays, replaces Z-rail for DIN connector mounting, completely user definable, 1-21 slots. Model No. 101CMBJ0XX	3U
Interconnects	Connects two J1 backplanes, Model No. 101JMPJ101, or two J2 backplanes, Model No. 101JMPJ201	.
Custom	Custom backplanes for VME, VME64x, VXS, and other backplanes	.

Live Insertion Products

Function Description Size

Live Insertion
Backplane VME320, transparent to system .

Hot Swap
Extender Used with VME64x backplanes, transparent to user .

Function	Description	Size
Live Insertion Backplane	VME320, transparent to system	.
Hot Swap Extender	Used with VME64x backplanes, transparent to user	.

Cardrack Hardware/Accessories

Function Description Size

Adapter
Boards Industry standard as well as custom, Adapts 6U to 9U size, total signal line shielding, Sun compatible. Model No. 121ADT16XX-XXX .

Adapter Allows boards of different depths to be adapted for use in same chassis. Signal lines completely shielded. Stripline construction, One piece 6U J1/J2 design, 3U and 9U avail. Special configurations available. Model No. 111FFEXXXX 3U
6U
9U

VME64x
Form Factor
Extender Allows boards of different depths to be adapted for use in same chassis. Stripline design 6U

Function	Description	Size
Adapter Boards	Industry standard as well as custom, Adapts 6U to 9U size, total signal line shielding, Sun compatible. Model No. 121ADT16XX-XXX	.
Adapter	Allows boards of different depths to be adapted for use in same chassis. Signal lines completely shielded. Stripline construction, One piece 6U J1/J2 design, 3U and 9U avail. Special configurations available. Model No. 111FFEXXXX	3U 6U 9U
VME64x Form Factor Extender	Allows boards of different depths to be adapted for use in same chassis. Stripline design	6U

Test and Diagnostic

Function Description ADDR/DATA
Width Size

Extender Extend all 96 signals, including power and ground of J1 or J2 per Rev C.1. 3U, 6U and 9U x 160mm, 220mm, 280mm, 340mm and 400mm. Model No. 101EXTUXXX 3U
6U
9U

VME/VME64x
Load Board 6U x 160mm. Verifies chassis can meet power requirements. Aids in locating hot spots in the chassis . 6U

VME64x
Test
Extender Brings circuit card out of cage so that it can be tested or debugged . 6U

Function	Description	ADDR/DATA Width	Size
Extender	Extend all 96 signals, including power and ground of J1 or J2 per Rev C.1. 3U, 6U and 9U x 160mm, 220mm, 280mm, 340mm and 400mm. Model No. 101EXTUXXX		3U 6U 9U
VME/VME64x Load Board	6U x 160mm. Verifies chassis can meet power requirements. Aids in locating hot spots in the chassis	.	6U
VME64x Test Extender	Brings circuit card out of cage so that it can be tested or debugged	.	6U

Return to List of Vendors

Go to Product Function Index