M-Module Analog I/O Modules

AcQ InduCom Tel: +31-412-641922

Function	Description
Aperture A/D	100kSPS 12-bit A/D converter module that will sample and selectively store differential analog signals along with a 31-bit time stamp at a rate up to 100kSPS. Model number M200
LVDT/RVDT Controller	Handles up to four LVDT/RVDT devices. Conversions made with 13-bit res. using Nat'l Semi LM12458 Data Acq System. Sequencer allows complex conversion algorithms to execute without host intervention. Results stored in on-chip FIFO. Model No. M372/MOD
TMS320C32 DSP Controller 2 Analog Outputs	TMS320C32, 60MHz (good for 30MIPS). Ideal for embedded analog signal analysis and data compression applications. Can be used as independent processing unit controlled by hosting system. Local memory interface. Model No. M381/MOD
TMS320C32 DSP Controller 3Analog Outputs	TMS320C32, 60MHz (good for 30 MIPS). Ideal for embedded analog signal synthesis applications. Can be used as an independent processing unit controlled by host system. Local memory for fast accesses by DSP. Model No. M383/MOD
6 Channel RTD Measurement	Six 2-, 3-, or 4-wire high accuracy RTD measurement channels. Available in four versions: PT100 measurement, PT200 measurement, PT500 measurement and PT1000 measurement. Model number M390/MOD
12-/16-bit ADC with 16x Common-Mode Inputs	For applications where autonomous signal conversion is an issue, also standard mid-range applications. Local TMS320C203 DSP provides processing to scan all enabled channels at a programmable rate, perform gain/offset compensation and store conversion results in dual-ported memory. Model No. M392/MOD
12-/16-bit ADC with 8x Differential Inputs	Suited for applications where autonomous signal conversion is an issue, also standard mid-range applications. Local TMS320C203 DSP provides processing to scan all channels at maximum rate, perform gain/offset compensation and store conversion results in dual-ported memory. Model No. M393/MOD
12-bit DAC with 16x Voltage Outputs	16 analog voltage outputs, integrated on the M-Module standard. Digital-to-analog converters have a resolution of 12-bit. The voltage outputs have a software programmable common output range of 0..+10V (uni-polar) or -10V..+10V (bi-polar). Model No. M395/MOD

MEN Mikro Elektronik Tel: +49 911-99335-0, (972) 939-2675

Function	Description
4 Channel Analog Input	12bits resolution, differential with simultaneous sampling, 28KHz sampling frequency, 55dB common-mode rejection, 512byte FIFO, opt-iso, Commercial, Ext. Temp versions, Model No. M16
8/16 Channel Analog Inputs	current or voltage inputs, 14 bits resolution, 10 µs acquisition/conversion time, precision better than 0.05, unipolar/bipolar software-selectable, autoincrement of channel number, external triggering, optical isolation (500V), 0...+ 60°C and -40...+85°C. Model No. M35N
4 Channel Analog Input	16bits, measurement data acquisition with DSP, sample and hold, Commercial, Ext. Temp versions, Model No. M59
4 Channel Analog Output	16bits, measurement data aquisition with DSP, Commercial, Ext. Temp versions, Model No. M68
4 Channel Analog Input	PT100, PT1000, Thermo coupling, Commercial, Ext. Temp versions, Model No. M70
16 Channel Analog Output	12bits resolution, voltage 0-10V or current 4-20mA, isolated, Commercial, Ext. Temp versions, Model No. M62