M-Module Networking Modules

AcQ InduCom Tel: +31-412-641922

Function Description

ARCNET
2.5 and 5 Mbps
Interface Supports standard 2.5Mbps transmission rate as well as 5Mbps.The ARCNET standard is widely used in industrial automation because of its deterministic characteristics and fault tolerant behaviour.Model No. M300/MOD

ARINC-429
Controller Based on tMC68332 microcontroller. TPU is programmed to handle the ARINC-429 transmit and receive algorithms, while the CPU neatly organizes the traffic between the bus and the host CPU. Model No. M302/MOD

BITBUS
Controller i8044 BITBUS microprocessor provides all functions to implement a BITBUS master or slave node. Local FIFOs allow DMA capable hosts to retrieve data from the node. Firmware includes Remote Access and Control (RAC) command set to allow specific functions to be performed on the remote nodes. Model No. M304/MOD

CANbus
Controller Based on the SJA1000. Integrated standalone controller for the Controller Area Network (CAN) with a M-module interface. Model No. M360/MOD

Ethernet
Controller Based on the AM79C90 LANCE chip. The AM79C90 local area network controller for Ethernet (LANCE) complies to the IEEE-802.3/Ethernet LAN standard and provides a means for fast and easy network interfacing. Model No. M363/MOD

Ethernet with
MC68EN360 and
Local TCP/IP Based on the MC68EN360 Quad Integrated Communication Controller (QUICC). Designed to support high data transfer rates with a minimum of impact on the system load. Model No. M369/MOD

Intelligent
CANbus
Controller Based on the MC68376. The MC68376 contains intelligent perhiperal modules such as the CAN 2.0 B controller module (TouCAN), time processor unit (TPU), 10-bit queued ADC (QADC), queued serial module (QSM) and a configurable timer module (CTM4). Model No. M376/MOD

Function	Description
ARCNET 2.5 and 5 Mbps Interface	Supports standard 2.5Mbps transmission rate as well as 5Mbps.The ARCNET standard is widely used in industrial automation because of its deterministic characteristics and fault tolerant behaviour.Model No. M300/MOD
ARINC-429 Controller	Based on tMC68332 microcontroller. TPU is programmed to handle the ARINC-429 transmit and receive algorithms, while the CPU neatly organizes the traffic between the bus and the host CPU. Model No. M302/MOD
BITBUS Controller	i8044 BITBUS microprocessor provides all functions to implement a BITBUS master or slave node. Local FIFOs allow DMA capable hosts to retrieve data from the node. Firmware includes Remote Access and Control (RAC) command set to allow specific functions to be performed on the remote nodes. Model No. M304/MOD
CANbus Controller	Based on the SJA1000. Integrated standalone controller for the Controller Area Network (CAN) with a M-module interface. Model No. M360/MOD
Ethernet Controller	Based on the AM79C90 LANCE chip. The AM79C90 local area network controller for Ethernet (LANCE) complies to the IEEE-802.3/Ethernet LAN standard and provides a means for fast and easy network interfacing. Model No. M363/MOD
Ethernet with MC68EN360 and Local TCP/IP	Based on the MC68EN360 Quad Integrated Communication Controller (QUICC). Designed to support high data transfer rates with a minimum of impact on the system load. Model No. M369/MOD
Intelligent CANbus Controller	Based on the MC68376. The MC68376 contains intelligent perhiperal modules such as the CAN 2.0 B controller module (TouCAN), time processor unit (TPU), 10-bit queued ADC (QADC), queued serial module (QSM) and a configurable timer module (CTM4). Model No. M376/MOD

MEN Mikro Elektronik Tel: +49 911-99335-0, (972) 939-2675

Function Description

CANbus
Interface 4 x 82C200 or 1 x 82C200, low cost, ISO 11898, isolated, Commercial, Ext. Temp versions, Model No. M51

CANbus
Interface 82C200 + 68332, CANopen support, Commercial, Ext. Temp versions, Model No. M65

Profibus - DP
Interface 68331 and ASPC2 CPUs, master, isolated, Softing portation, Commercial, Ext. Temp versions, Model No. M57

Function	Description
CANbus Interface	4 x 82C200 or 1 x 82C200, low cost, ISO 11898, isolated, Commercial, Ext. Temp versions, Model No. M51
CANbus Interface	82C200 + 68332, CANopen support, Commercial, Ext. Temp versions, Model No. M65
Profibus - DP Interface	68331 and ASPC2 CPUs, master, isolated, Softing portation, Commercial, Ext. Temp versions, Model No. M57

N.A.T. GmbH Tel: +49 2241/3989-0

Function Description

Intelligent
Ethernet MC68360, EPROM, 1MB dual port DRAM, TCP/IP, ISO/OSI onboard. Model No. MS360-Eth

Intelligent
Universal
Communications
Controller MC68360, EPROM, 1MB dual port DRAM, options: RS232-D, X.25, V.110, G.703. Model No. MS360-U

Function	Description
Intelligent Ethernet	MC68360, EPROM, 1MB dual port DRAM, TCP/IP, ISO/OSI onboard. Model No. MS360-Eth
Intelligent Universal Communications Controller	MC68360, EPROM, 1MB dual port DRAM, options: RS232-D, X.25, V.110, G.703. Model No. MS360-U

Return To M- Module Index / Return To Mezzanine Directory Index / Return To VME Directory Main Page