ACQ INDUCOM Tel: +31-412-641922
| Function | Description | Software Support | ADDR/DATA Width | Size |
|---|---|---|---|---|
Controller with Amplifiers 2x 2-phase or 1x 4-phase or up to 8 axis | Ideal solution for all applications where stepper motors must be controlled with a maximum of flexibility and a minimum of overhead. Local processors handle all high-level commands to provide maximum control for both straight forward as very complex applications. Model No. VME1321(3U) or VME321(6U) | 6U | ||
Controller for External Amplifiers 2 axis or 8 axis | Designed to drive up to 8 external amplifiers. This is an ideal solution for all applications where stepper motors must be controlled with a maximum of flexibility and a minimum of overhead. Model No. VME1322(3U) or VME322(6U) | 6U | ||
Incrementel Encoder Interface 6 or 24 Channels | Intelligent Quadrature Incremental Decoder board can be configured for interfacing quadrature incremental encoders with or without an index channel. In index mode up to sixteen encoders with two quadrature channels and an index channel can be connected, and in non-index mode up to 24 encoders with two quadrature channels can be connected. This board operates on two encoder input channels and decodes a pair of out-of phase signals in order to increment or decrement a counter. Model No. VME1323(3U) or VME323(6U) | 6U |
CURTISS-WRIGHT CONTROLS EMBEDDED COMPUTING - SUBSYSTEMS (formerly VISTA Controls) Tel: (661) 257-4430
| Function | Description | Software Support | ADDR/ DATA Width | Size |
|---|---|---|---|---|
Digital- Synchro I/O Module | 4 channel Digital to Synchro-Resolver converter + 4 channel Synchro-Resolver to Digital converter. 16 bit resolution, full galvanic isolation 800 V. Full Built-in-test with signal wrap around capability. Industrial, Rugged and Mil Spec versions. Model No. VSDS-X-XXX | |||
to Digital w/Mixed I/O | 10 to 16-bit resolution; 4 synchro/resolver-to-digital channels; 6 modulated AC output channels and 16 channels of 28V discrete I/O. AC reference generator on board. Commercial, Rugged, MIL-SPEC versions. Model No. SR4-CLX-XXX | |||
to Digital | Eight (8) or sixteen (16) channel; 14-bit synchro to digital converter board. 11.8, 26, 90, 114Vrms inputs. On-board voltage 26Vrms or 115Vrms reference. Commercial, Rugged, MIL-SPEC versions. Model No. SRD-CLX-XXX | |||
Synchro/Resolver | Eight (8) independent 14-bit digital to synchro/resolver outputs. 11.8, 26, 90, 114Vrms output ranges. 2 VA per output. On-board 26Vrms or 115Vrms voltage reference. Commercial, Rugged, MIL-SPEC versions. Model No. DSR-CLX-XXX |
ESD Tel: (800) 732-8006, +49-511-372980
| Function | Description | Software Support | ADDR/ DATA Width | Size |
|---|---|---|---|---|
Controller with SSI, Encoder Limit Switch Inputs | Processor 68331/20 MHz. SSI interface for 4 encoders. 3 channel incremental encoder interface. 3 limit switch inputs. 5 digital outputs. 5 analog inputs ±10V, 12 bit. 5 analog outputs ±10V, 12 bit for servos. Electrically isolated. Model No. VME-IMOTION | RTOS UH | ||
Controller for 5 Axes | Processor 68303/16 MHz, incremental encoder inputs, 2 limit switch inputs per axis, analog outputs for servo amplifier connection, enable outputs, synchronous movement of all drives. Comfortable firmware. Electrically isolated. Model No. VME-IPOS | Linux RTOS UH |
HYTEC ELECTRONICS Tel: +44 (0) 118 9757770
| Function | Description | Software Support | ADDR/ DATA Width | Size |
|---|---|---|---|---|
Motor Controller | 4 independent channels; 24 Bit Step Magnitude plus Direction; Programmable Speed and Ramp Rate; X1, X10 and X100 Speed multiplier giving up to 500,000 steps per second for microstepping applications; Selectable Step Pulse width 1ms or 20ms; Optical encoder feedback; Optional Manual Controller. Model No. VSMC2256 | |||
| 1- to 4-channel Translator/Amplifier for 2256. Model No. SMDS2260 |
INTERFACE CONCEPT Tel: +33(0)2-98-573 030
| Function | Description | Software Support | ADDR/ DATA Width | Size |
|---|---|---|---|---|
Electronic Converter | Power Electronic Converter control board. Based on a TMS320C33-150MHz DSP together with FPGA for rapid I/O control (PWM, safety). I/O as follows: 7 analog inputs, 4 analog outputs, quadrature and absolute encoders, 4 digital inputs, 4 digital outputs, 8 pulses outputs, CAN, RS232, JTAG. Model No. CTRL-EP31 | RT-Workshop | 2 or 3 Slots |
NORTH ATLANTIC INDUSTRIES Tel: (631) 567-1100
| Function | Description | Software Support | ADDR/ DATA Width | Size |
|---|---|---|---|---|
Synchro Resolver Measurement Channels w/5VA Programmable Reference Supply | 16 bit res. w/±1 arc min (0.017°) accuracy. Transformer isolation. 16-bit turn counters; incremental encoder (A+B) and index outputs. Hall Effect (A,B,C) commutation outputs. 50Hz to 10KHz. Tracking to 150 rps. High accuracy digital velocity outputs. Background Bit Testing continually checks performance. I/O at front panel or P2. Hot swapping capability. Commercial or MIL-SPEC versions. Model No. 64SD3 | |||
to Digital Channels w/Linear DC or Encoder Outputs and 5VA Reference Supply | 14 or 16-bit resolution. Accuracy to ±2 arc minutes. 50Hz to 10kHz. Self test. Linear DC outputs proportional to Syn/Res angle with 0.1° accuracy and full range digital offset capability. Latch feature. Reference, signal and tracking loss detection. Power from either P1 or front panel. Commercial, Ext. Temp, Rugged, MIL-SPEC versions. Model No. 6106 | |||
Synchro/Resolver Measurement Up To 6 Chan 4 Synchro/Resolver Simulation w/Opt 5 VA Reference supply | 16-bit resolution. Measurement accuracy ±1 arc min. Stimulus accuracy to ±30 arc sec. 50Hz to 10KHz for measurement. 360 Hz to 10 KHz. High accuracy digital velocity outputs. Transformer isolation. Background Bit testing continually checks performance. I/O at front panel or P2. Commercial, Ext. Temp, Rugged, MIL-SPEC versions. Model No. 64CS3 | |||
Synchro/Resolver Simulation | 16-bit resolution. Accuracy to ±30 arc seconds with 1.2 VA drive. 360Hz to 10KHz. Short-circuit proof. Transformer isolation. Background Bit testing continually checks performance. I/O at either front panel or P2. Commercial, Ext. Temp, Rugged, MIL-SPEC versions. Model No. 64DS1 | |||
and Simulation | Single slot card contains two 60/400 Hz Synchro output transformers and two reference input transformers and is specifically designed to interface with VME-64DS1 and 64CS3. Model No. 64TR1-F | |||
Digital-to-Syn Drives Torque Receivers | 5VA Drive capability to drive torque receivers. 14 bit resolution. ±6 arc minutes accuracy. 360Hz to 440Hz. Short-circuit proof outputs. Transformer isolation. Self-test. P2 I/O, Commercial, Ext. Temp, Rugged, MIL-SPEC versions. Model No. EK5410C-93 | |||
Measurement and Simulation | One Synchro Measurement, One Synchro Stimulus and One Control Transformer Ouput with Amplifier, Step up Transformer and Demodulator with A/D Converter. Model No. E5410C-153-1 | |||
LVDT Measurement w/5VA Programmable Excitation | Each of the 16 ratiometric tracking inputs auto-ranges from 2.0 to 28 volts with 16-bit resolution and 0.025% FS accuracy. Each excitation input auto-ranges from 2.0 to 28 volts. Frequency range 360Hz to 10KHz. Auto phase correction to ±60° phase shifts. Transformer isolation. Background Bit testing. I/O at either front panel or P2. Commercial, Ext. Temp, Rugged, MIL-SPEC versions. Model No. 64LD2 | |||
LVDT Outputs | Each of the 16 ratiometric channels programmable from 3.0 to 28 volts with 16-bit resolution and 0.05% linearity. Frequency range 360Hz to 10KHz. Can produce differential (A+B) outputs. Short-circuit proof. Background Bit testing continually checks performance. I/O at either front panel or P2. Commercial, Ext. Temp, Rugged, MIL-SPEC versions. Model No. 64DL1 | |||
Motor Control | This conduction-cooled card, incorporates 2 four-quadrant bi-directional PWM amplifiers that drive brush type motors, 5 A average, 8.5A peak with extensive diagnostics. Optional RS-422, A/D, D/A or dual R/D converters. Full diagnostics. Commercial, Ext. Temp, Rugged, MIL-SPEC versions. Model No. 64PW3 | |||
Reference/ Excitation Supply | 5VA Reference Supply. 2.0 to 115 Vrms (360Hz to 10kHz), ±2 percent voltage tolerance, ±1 percent frequency tolerance. Single or dual supplies on one card. Front panel or P2 I/O, Commercial, Ext. Temp, Rugged, MIL-SPEC versions, Model No. 6U - 5410C-REF, 3U - 5411C-REF | 6U | ||
Synchro/Resolver Measurement and Simulation | Single-slot card contains two 60/400 Hz Synchro output transformers and two reference input transformers and is specifically designed to interface with VME-64CS1/CS3-84CSP8-57. Model No. 64TR1 | |||
| Transition Boards using rugged Military connectors. Model No. 64RT1 |
VMIC Tel: (256) 880-0444, (800) 322-3616
| Function | Description | Software Support | ADDR/ DATA Width | Size |
|---|---|---|---|---|
Input | Quad-Channel Multiplexed 14-bit resolution, 11.8, 26, or 90 VL-L; 60 or 400 Hz ref.; inputs may be simultaneously sampled, then randomly accessed for conversion; loopback BIT with VMIC's SRTbus and Digital-to-Sync/Resolver Conv. Model No. VMIVME-4911 | VxWorks QNX | ||
Synchro/Resolver Converter | Single/dual channel, 14-bit resolution. Accuracy ±4 ARC MIN. 60 or 400Hz ref. 11.8 or 90 VL-L. 1.5 or 4.5 VA output. Output isolation switches. Fail LED. Supports loopback BIT with VMIC's Sync/Resolver test bus and the VMIVME 4911. Model No. VMIVME-4900 | VxWorks QNX |