ACQ INDUCOM Tel: +31-412-641922
| Function | Description | Software Support | ADDR/DATA Width | Size |
|---|---|---|---|---|
Controller | Provides 16 or 64 ARINC-429 compatible channels (2x or 8x receive and 2x or 8x transmit) at any rate between 12.5 and 100kbps. Because this board is built upon a flexible platform, user functions can be implemented almost without restriction, making this product flexible and user-friendly. Model No. VME1302(3U) or VME302(6U) | 6U |
ACT/TECHNICO Tel: (215) 956-1200
| Function | Description | Software Support | ADDR/ DATA Width | Size |
|---|---|---|---|---|
| Single or dual attach, 1MB memory, on-board SMT. Link level driver available. Available in 3U VME, 6U VME, or PMC form factors | Linux Windows Solaris | 6U | ||
Ethernet | Ethernet switches with up to 24 ports of 10/100/1000. Support for TX/FX/BT/SX/LX modes. Available in commercial and rugged version (conduction cooled, conformal coating). Switch is managed via Ethernet using a common browser interface or using SNMP protocol, or through the VME SBC using a mailbox data structure. P/N 57xx series | Linux Windows | ||
Ethernet | Up to 16 ports 10/100/1000 in TX/FX/BT/SX modes. This high speed, non-blocking switch supports up to 1000 MAC address entries with automatic learning and aging, and prevents packet loss with back pressure and IEEE802.3x flow control. Both commercial and rugged versions available. P/N 57xx series |
CSP, Inc. (CSPI) Tel: (978) 663-7598, (800) 325-3110
| Function | Description | Software Support | ADDR/ DATA Width | Size |
|---|---|---|---|---|
Modules Myrinet on VME | Highly scalable packet technology offers gigabyte-per-second I/O data rates between VME boards, subracks, and chassis-chassis systems. 2000 SERIES MultiComputer 6U VME, SAN Chassis, and Backplane Overlay Switch Modules. Options to integrate Myrinet-2000 Line Cards provide Serial and Fiber interfaces. |
DRS INTELLIGENCE TECHNOLOGIES Tel: (603) 424-3750
| Function | Description | Software Support | ADDR/ DATA Width | Size |
|---|---|---|---|---|
Switch Fabric | Board with 1 Broadcom BCM1250 (Dual MIPS64 64-bit floating point cores) System-on-Chip (SoC), 2 64-port high-speed data switches, Dune high speed switch fabric, Gigabit Ethernet control plane. |
DYNATEM Tel: (949) 855-3235
| Function | Description | Software Support | ADDR/ DATA Width | Size |
|---|---|---|---|---|
| On-board 68000 processor; AM 7990; 2x256KB SRAM; TCP/IP firmware. Model No. ET001 |
ELTA ELECTRONIC INDUSTRIES Tel: 972-8-857 2413
| Function | Description | Software Support | ADDR/ DATA Width | Size |
|---|---|---|---|---|
Ethernet Controller | 80386, 20MHz, 32-bit VME master/slave, 512KB dual port SRAM, 256KB EPROM, AUI or 10Base2, ISO/OSI layers 1-4. Up to 12 Ethernet channel boards may be supported. Commercial and Ext. Temp versions. Model No. SBIAV | VRTX |
INTERFACE CONCEPT Tel: +33(0)2-98-573 030
| Function | Description | Software Support | ADDR/ DATA Width | Size |
|---|---|---|---|---|
Unmanaged Switches | ComEth 3000a range - Fast Ethernet Layer 2 switches providing 5, 10 or 12*10/100TX. Rear/front panel I/O according to models. Products available in standard and extended temp ranges. Variants include: | 6U | ||
| 5*10/100TX ports to the front panel. Model No: ComEth3010a | ||||
| 4*10/100TX + 1*100FX ports to the front panel. Model No: ComEth3011a | ||||
| 8*10/100TX ports to the front panel. Model No: ComEth3020a | ||||
| 12*10/100TX ports to the front panel. Model No: ComEth3021a | ||||
| 10*10/100TX + 2*100FX ports to the front panel. Model No: ComEth3022a | ||||
| 8*10/100TX ports to the rear panel. Model No: ComEth3030a | ||||
| 8*10/100TX ports to the rear panel +2*100FX to the front panel. Model No: ComEth3031a | ||||
Managed Switches | ComEth 5100a range - PICMG 2.16 amd VITA 31.1 compliant Layer 2 Ethernet Switches providing 24*10/100TX + 2*Giga 1000BT/Fiber. On-board local PowerPC processor for switch management through SNMP or web browser. Rear/front panel I/O according to models. Products available in standard and extended temp ranges. Variants include: | |||
| 20*10/100TX ports to the backplane (PICMG 2.16 and VITA 31.1 compliant) or through a rear transition module, 4*10/100TX and 2*1000BT to the front panel. Model No: ComEth5140a | ||||
| 20*10/100TX ports to the backplane (PICMG 2.16 and VITA 31.1 compliant) or through a rear transition module, 4*10/100TX to the backplane and 2*1000BT to the front panel. Model No: ComEth5141a | ||||
| 20*10/100TX ports to the backplane (PICMG 2.16 and VITA 31.1 compliant) or through a rear transition module, 4*10/100TX to the backplane and 2*1000BT (auto SX/TX)to the front panel. Model No: ComEth5144a | ||||
Managed Switches | ComEth 4000 range - Layer 2 managed Giga-Ethernet - 16 or 24 ports 10/100/1000BT. On-board local PowerPC processor for switch management through SNMP or web browser. Front panel I/O. Standard environment. Variants include: | |||
| 16*10/100/1000BT ports - 2 slots. Model No: ComEth 4010 | ||||
| 24*10/100/1000BT ports - 2 slots. Model No: ComEth 4011 | ||||
| 20*ports 10/100/1000BT + 4*1000SX-LC - 2 slots. Model No: ComEth4012 | ||||
Managed Switches | ComEth 4050 range - Full Gbs PICMG 2.16 and VITA 31.1 compliant Layer 2 Ethernet Switches providing up to 24*10/100/1000Mbs. On-board local PowerPC processor for switch management through SNMP or web browser. Rear/front panel I/O according to models. Products available in standard, extended, rugged and conduction-cooled grades. Many variants include: | |||
| 20*10/100/1000Mbs ports to the backplane (PICMG 2.16 and VITA 31.1 compliant) or through a rear transition module, 4*1000BT to the front panel. Model No: ComEth4051 | ||||
| 20*10/100/1000Mbs ports to the backplane (PICMG 2.16 and VITA 31.1 compliant) or through a rear transition module, 4*1000BT to rear I/O. Model No: ComEth4052 | ||||
| 20*10/100/1000Mbs ports to the backplane (PICMG 2.16 and VITA 31.1 compliant) or through a rear transition module, 2*GE SX-LC (auto SX/TX) to the front panel. Model No: ComEth4053 | ||||
| 16*10/100/1000Mbs ports to the backplane (PICMG 2.16 and VITA 31.1 compliant) or through a rear transition module. Available in conduction-cooled version only. Model No: ComEth4055 | ||||
Managed/ Unmanaged Switches | ComEth4100 range - Layer 2 Giga-Ethernet - 9 or 10 ports 10/100/1000BT - switches. On-board local PowerPC processor for switch management through SNMP or web browser. Rear/front panel I/O. Managed/unmanaged versions. Products available in standard, extended, rugged and conduction-cooled grades. Many variants include: | |||
| Unmanaged switch - 10*10/100/1000BT - Front panel I/O. Model No: ComEth 4110 | ||||
| Unmanaged switch - 9*10/100/1000BT + 1*1000SX - Front panel I/O. Model No: ComEth 4111 | ||||
| Managed switch - 9*10/100/1000BT - Front panel I/O. Model No: ComEth 4115 | ||||
| Managed switch - 8*10/100/1000BT + 1*1000SX - Front panel I/O. Model No: ComEth 4116 | ||||
| Unmanaged switch - 9*10/100/1000BT to the backplane + 1*10/100/1000BT on front panel. Model No: ComEth 4120 | ||||
| Managed switch - 9*10/100/1000BT - Rear panel I/O. Model No: ComEth 4125 | ||||
Managed Switches | ComEth3200 range - Modular boards which can be equipped with mezzanine boards to extend their switching capabilities. Two base board models are available: 8 or 16 10/100TX ports - 4 of them being configurable in 100FX. These layer 2 switches which provide a QoS layer2/3, can be easily managed via Ethernet with a computer using a common browser interface or using SNMP protocol, or through CPU VME using a mail-box data structure. Rugged versions are available on request (extended temperature range, coating, stiffener). Mezzanine modules support 10/100TX, 100FX and 1000BT/SX/LX modes, and one of them provides up to 5 Gigabit. 1 or 2 slots. Numerous variants possible. following are a few examples: | |||
| 8*10/100TX on front panel - 1 slot. Model No. ComEth3223 | ||||
| 4*10/100TX on front panel + 4*100FX - 1 slot. Model No. ComEth3224 | ||||
| 6*10/100TX + 2*100FX on front panel - 1 slot. Model No. ComEth3225 | ||||
| 16*10/100TX on front panel - 2 slots. Model No. ComEth3229 | ||||
| 14*10/100TX + 2*100FX on front panel - 2 slots. Model No. ComEth3231 | ||||
| 12*10/100TX on front panel + 4*100FX - 1 slot. Model No. ComEth3232 | ||||
| Mezzanine board with 4*10/100/1000BT. Model No. Mezz.1 | ||||
| Mezzanine board with 1*1000SX. Model No. Mezz.2 | ||||
| Mezzanine board with 1*1000SX. Model No. Mezz.2 | ||||
Managed Switches | ComEth 3300 range - Ethernet Switches equipped with 8 or 26 ports supporting Ethernet 10/100base-TX. On-board local PowerPC processor for switch management through SNMP or web browser. Rear/front panel I/O. Managed/Unmanaged versions. Products available in standard, extended, rugged and conduction-cooled grades. Many variants include: | |||
| 8*10/100TX routed to the P2 connector - 1 slot. Model No. ComEth3327 | ||||
| 24*10/100TX routed to the P2 connector + 2 GE TX routed to the P0 connector - 1 slot. Model No. ComEth3331 | ||||
| 24* 10/100TX routed to the P2 connector + 2 GE SX/TX (auto) - 1 slot. Model No. ComEth3332 | ||||
| 24*10/100TX routed to the P2 connector + 2 GE TX on front panel - 1 slot. Model No. ComEth3333 |
N.A.T. GmbH Tel: +49 2241/3989-0
| Function | Description | Software Support | ADDR/ DATA Width | Size |
|---|---|---|---|---|
Ethernet Controller | AM29000/16 RISC CPU; D32/A32, D16,A24 VMEbus interface; 512KB or 1MB tri-ported communication SRAM; 32bit Ethernet controller AM79C900; 10Base2, 5 & T; TCP/IP & ISO/OSI on-board. Model No. Eth29 | pSOS+ VxWorks LynxOS | ||
FDDI Controller | AM29000, 25/33 RISC CPU; D64/A64; DMA & master option; 1/2/4MB tri-ported communications SRAM; SAS/DAS; NS FDDI chipset; OBS; CDDI; TCP/IP & ISO/OSI on-board; routing options. Model No. FDDI29 | pSOS+ VxWorks LynxOS | ||
Ethernet Controller | AMD7990 LANCE 16bit Ethernet controller, 10Base2, 10Base5, 10BaseT; 64 or 256KB dual ported communications RAM; D16/A24 VMEbus interface. Model No. Net01 | VxWorks LynxOS HP-UX | 6U | |
Ethernet | AM29030/16 RISC CPU, D32/A32, 1MB dual-ported RAM, DC21143 Fast Ethernet controller, 100BaseTx, 10BaseT, AUI, BNC, 100BaseFx, TCP/IP on board | pSOS+ VxWorks |
PEP MODULAR COMPUTERS Tel: +49-8341-803-0, (412) 921-3322
| Function | Description | Software Support | ADDR/ DATA Width | Size |
|---|---|---|---|---|
X.25 Controller | 2 physical X.21bis channels, 4K virtual circuits/channel, transfer rate 1MBaud/physical channel; certification for different public networks (CCITT red book). Ext. Temp version. Model No. VIX25 | |||
Controller | Local area network controller with local 68000 intelligence, CSMA/CD protocol, 2 x 64Kb dual ported RAM plus local RAM/ROM for fast execution. Ext. Temp version. Model No. VLAN | VxWorks VRTX |
RADSTONE EMBEDDED COMPUTING Tel: +44-1327-359444, (800) 368-2738
| Function | Description | Software Support | ADDR/ DATA Width | Size |
|---|---|---|---|---|
Switch | Fully managed 16 port 10/100/1000 Base-T layer 2/3 Gigabit Ethernet switch with IPv6 capability. Rear I/O, front optical I/O optional, commercial, ext. temp, rugged and conduction-cooled versions. Model No. GBX16 | |||
Switch | Optical expansion board - factory-build option for GBX16. 12x SX or LX optical transceivers. When combined with GBX16 allows up to 16 optical ports from a single GBX16. 1000Base-T compliant. Model No. OXB | |||
Switch | Fully rugged, fully managed, standalone Gigabit Ethernet switch box with IPv6 capability. Sixteen 1000/100/10 Mbps copper Ethernet ports, full layer 2 and layer 3 management, embedded Freescale PowerPC at 300MHz with 128MB SDRAM and 32MB Flash, IP68 rated front panel connectors. Model No. GS16 |
VISTA CONTROLS CORPORATION Tel: (805) 257-4430
| Function | Description | Software Support | ADDR/ DATA Width | Size |
|---|---|---|---|---|
FDDI Communication Subsystem | Programmable VC-FDDI-INP II: VMEbus to FDDI Ring Adapter, National Chipset; 1MB Buffer Memory; SMT 7.3; DAS; Fiber Media; 16MHz Am29050; 1MB I-MEM (Flash) (VC-MON29k); 1MB D-MEM (SRAM); VME64; one slot; front panel FDDI I/O; VRTX, VxWorks support, Commercial, Rugged, MIL-SPEC versions avail, Model No. FDDI-CLX-001 | |||
FDDI Communication Subsystem | Programmable VC-FDDI-INP II: VMEbus to FDDI Ring Adapter, National Chipset; 1MB Buffer Memory; SMT 7.3; DAS; Fiber Media; 16MHz Am29050; 1MB I-MEM (Flash) (VC-MON29k); 1MB D-MEM (SRAM); VME64; one slot; P0 FDDI I/O; VRTX, VxWorks support, Commercial, Rugged, MIL-SPEC versions avail, Model No. FDDI-CLX-002 | |||
FDDI PMD-TP Controller | (shielded twisted pair), Programmable VC-FDDITP-INP II: VMEbus to FDDI Ring Adapter, National Chipset; 1MB Buffer Memory; SMT 7.3; DAS; Copper Media; 16MHz Am29050; 1MB I-MEM (Flash) (VC-MON29k); 1MB D-MEM (SRAM); VME64; one slot; VRTX, VxWorks support, Commercial, Rugged, MIL-SPEC versions avail, Model No. FDDITP-CLX-004 |
VMIC Tel: (256) 880-0444, (800) 322-3616
| Function | Description | Software Support | ADDR/ DATA Width | Size |
|---|---|---|---|---|
Reflective Memory w/Interrupts | High-speed Parallel Network, data written to memory in one chassis is also written to memory in all chassis on the network, data transfer rate 20MB/s (50 ft. cable). Multidrop capability, no processor overhead, 256K to 4MB reflective memory, network differential line drivers and receivers, up to 1000 ft. overall cable length. Model No. VMIVME-5550 | Solaris System V SGI IRIS SGI IRIX HP UX-RT Harris CX/UX | ||
RTnet Reflective Memory w/Interrupts | High-speed, easy-to-use reflective memory fiber-optic network (170 Mbaud), up to 2,000 m between nodes, supports up to 256 nodes, any node may interrupt any other node or all network nodes, no processor overhead, up to 1MB reflective memory. Transfer rate: 6.2MB or 3.2MB w/ redundant transfer, network compatible w/Multibus, PCI, PMC versions. Model No. VMIVME-5576 | Solaris System V SGI IRIS SGI IRIX HP UX-RT Harris CX/UX DEC UNIX WinNT | ||
Fiber-Optic RTnet Reflective Memory w/Interrupts | High-speed, easy-to-use reflective memory fiber-optic network, up to 1000 ft. between nodes, supports up to 256 nodes, data transferred at 29.5MB/sec, or 14.8MB/sec redundant transfer. No processor overhead, up to 16MB of reflective memory, network compatible with DMA version and PCI bus, PMC, and CPCI versions. Supports 30 m twinax, up to 1000ft fiber multimode, 10,000 m single mode. Model No. VMIVME-5588 | Solaris System V SGI IRIS SGI IRIX HP UX-RT VxWorks DEC UNIX WinNT | ||
Fiber-Optic RTnet Reflective Memory w/Interrupts and DMA | High-speed, easy-to-use reflective memory fiber-optic network. Supports 30 m coax, 10,000 m single mode, and up to 1000 ft multimode to 256 nodes, data transferred at 29.5MB/sec, or 14.8MB/sec w/ redundant transfer. No processor overhead, up to 16MB of reflective memory, VMEbus DMA data transfers, network compatible with non-DMA version and PCI bus and PMC versions. Model No. VMIVME-5588DMA | SGI IRIX DEC UNIX | ||
Fiber-Optic Bypass Switch | Automatically bypasses network nodes in the event of power loss, designed for use with VMIVME-5560, -5588, -5588DMA, VMICPCI-5588, VMIPCI-5588, or VMIPMC-5588, actively regenerates the optical signal, front panel switch for manual bypass control. Model No. VMIVME-5591 | |||
Single-Mode Converter | Node separation to 10 km (6.2 miles), designed for use with -5588 family of products, can be used as a long-line repeater, +5VDC and GND connection terminals for 6U applications. Model No. VMIVME-5592A | |||
Fiber-Optic Bypass Switch | Automatically bypasses a node in the fiber-optic network that has lost power, is designed for use with the VMIVME-5560, -5576, and -5588 family of products. May be manually operated with the front panel switch or remotely by the control pin on P2. Model No. VMIVME-5599 | |||
Node Fiber-Optic Bypass Switch | 2 or 4 Channel hub automatic node bypass switch for fiber-optic networks, designed for use with VMIxxx-5588 products. Separate power and GND connections, No processor overhead. May be manually or remotely operated. Model No. VMIVME-5593 | |||
Node Fiber-Optic Bypass Board | Designed to automatically bypass, without signal loss, up to four nodes in a fiber-optic Reflective Memory network. Used with VMIC's VMIXXX-5579 product family. May be remotely operated by control signals on the VME connector, up to 64 switches per network, no processor overhead involved. May be powered from a remote supply. Model No. VMIVME-5594 |