Miscellaneous PMC Modules

AcQ InduCom Tel: +31-412-651055

Function Description

Audio Audio card with front and rear I/O. Based on the Crystal CS4281 CrystalClearTM PCI Audio Interface controller and the Crystal CS4299A CrystalClearTM SoundFusionTM Audio Codec '97. Available in conduction cooled and extended temperature version. Model Number PMC481

Conduction Cooled Audio Conduction cooled audio card with rear I/O. Based on the Crystal CS4281 CrystalClearTM PCI Audio Interface controller and the Crystal CS4299A CrystalClearTM SoundFusionTM Audio Codec '97. Features four audio connections via the front panel using 3.5mm stereo connectors. Model number ccPCM481

Function	Description
Audio	Audio card with front and rear I/O. Based on the Crystal CS4281 CrystalClearTM PCI Audio Interface controller and the Crystal CS4299A CrystalClearTM SoundFusionTM Audio Codec '97. Available in conduction cooled and extended temperature version. Model Number PMC481
Conduction Cooled Audio	Conduction cooled audio card with rear I/O. Based on the Crystal CS4281 CrystalClearTM PCI Audio Interface controller and the Crystal CS4299A CrystalClearTM SoundFusionTM Audio Codec '97. Features four audio connections via the front panel using 3.5mm stereo connectors. Model number ccPCM481

Concurrent Technologies Inc. Tel: +44 1206 752626, (734) 971-6309

Function Description

PMC to PCMCIA
Supports Type 1 or Type 2 cards allowing modems, Flash EPROM, Ethernet, SCSI, etc. Model No. IO PMC/CIA

Function	Description
PMC to PCMCIA	Supports Type 1 or Type 2 cards allowing modems, Flash EPROM, Ethernet, SCSI, etc. Model No. IO PMC/CIA

Extreme Engineering Solutions Tel: (608) 833-1155

Function Description

PC to PMC or cPCI Extender Card 64 bit/66 Mhz PCI extender card for CompactPCI or PMC module development on PC motherboard. ATX Power connector for use without PC, and built in 3.3V supply. VME connector for PMC J14 I/O. Status LEDs for power, arbitration and interrupts. Debug header for access to all PCI signals, and local reset switch. Model No. XTend1000

Function	Description
PC to PMC or cPCI Extender Card	64 bit/66 Mhz PCI extender card for CompactPCI or PMC module development on PC motherboard. ATX Power connector for use without PC, and built in 3.3V supply. VME connector for PMC J14 I/O. Status LEDs for power, arbitration and interrupts. Debug header for access to all PCI signals, and local reset switch. Model No. XTend1000

General Micro Systems Tel: (909) 980-4863, (800) 307-4863

Function Description

IDE Provisions for Ultra DMA 33 IDE and 10/100BaseTX Ethernet. On board PCI to PCI bridge. IDE primary accessible via front panel and secondary via VME P2. Model No. PMC-IDE

Function	Description
IDE	Provisions for Ultra DMA 33 IDE and 10/100BaseTX Ethernet. On board PCI to PCI bridge. IDE primary accessible via front panel and secondary via VME P2. Model No. PMC-IDE

General Standards Corporation Tel: (205) 880-8787

Function Description

PCI to PMC
Mechanical
Adapter Provides for debug/testing of PMC boards in a PCI based system. Allows full access to both sides of PMC board under test

Function	Description
PCI to PMC Mechanical Adapter	Provides for debug/testing of PMC boards in a PCI based system. Allows full access to both sides of PMC board under test

Peritek Corporation Tel: (510) 531-6500

Function Description

3U PMC Carrier
For cPCI Systems Adapts one 32-bit or 64-bit PMC module to 32-bit or 64-bit cPCI system. 3U or 6U faceplate. Model No. PMA-C

6U PMC Carrier
For cPCI Systems Adapts one or two 32-bit or 64-bit PMC module to 32-bit or 64-bit cPCI system. Model No. PMB-C

3U PMC Carrier
For PCI Systems Adapts one 32-bit or 64-bit PMC module to 32-bit or 64-bit PCI system. PMC J4 is routed to optional top connector. Model No. PMA-P

Function	Description
3U PMC Carrier For cPCI Systems	Adapts one 32-bit or 64-bit PMC module to 32-bit or 64-bit cPCI system. 3U or 6U faceplate. Model No. PMA-C
6U PMC Carrier For cPCI Systems	Adapts one or two 32-bit or 64-bit PMC module to 32-bit or 64-bit cPCI system. Model No. PMB-C
3U PMC Carrier For PCI Systems	Adapts one 32-bit or 64-bit PMC module to 32-bit or 64-bit PCI system. PMC J4 is routed to optional top connector. Model No. PMA-P

Radstone Embedded Computing Tel: (800) 368-2738, +44 (0) 1327-359444

Function Description

Switched
Fabric
Interconnect StarFabric based switched fabric interconnect PMC. With 4x 5Gbps (duplex, peak) external StarFabric ports at the front or rear, 64/66 PCI-to-StarFabric bridge and 2MB Flash. Model No. PMC StarLite

Function	Description
Switched Fabric Interconnect	StarFabric based switched fabric interconnect PMC. With 4x 5Gbps (duplex, peak) external StarFabric ports at the front or rear, 64/66 PCI-to-StarFabric bridge and 2MB Flash. Model No. PMC StarLite

SBS Technologies Tel: (505)-875-0600

Function Description

Audio Conduction cooled SoundBlaster-compatible audio PMC capable of interfacing to a single stereo line input, stereo auxiliary input, microphone, and mono input, as well as amplifier-driven stereo speaker outputs, hardware volume control, and a mono output. TTL-level PC speaker input provided and routed through an auxiliary input. Model No. PMC-AUDIO-CC

Audio SoundBlaster-compatible audio module capable of interfacing to a single stereo line input, stereo auxiliary input, a microphone, and a mono input, as well as amplifier-driven stereo speaker outputs, hardware volume control, and a mono output. ITTL level PC speaker input provided and routed through an auxiliary input. Rear I/O. Model No. PMC-AUDIO-BP

Audio SoundBlaster-compatible audio module capable of interfacing to a single stereo line input, stereo auxiliary input, microphone, and a mono input, as well as amplifier-driven stereo speaker outputs, hardware volume control, and a mono output. ITTL level PC speaker input provided and routed through an auxiliary input. Front panel/rear I/O. Model No. PMC-AUDIO-FP

Function	Description
Audio	Conduction cooled SoundBlaster-compatible audio PMC capable of interfacing to a single stereo line input, stereo auxiliary input, microphone, and mono input, as well as amplifier-driven stereo speaker outputs, hardware volume control, and a mono output. TTL-level PC speaker input provided and routed through an auxiliary input. Model No. PMC-AUDIO-CC
Audio	SoundBlaster-compatible audio module capable of interfacing to a single stereo line input, stereo auxiliary input, a microphone, and a mono input, as well as amplifier-driven stereo speaker outputs, hardware volume control, and a mono output. ITTL level PC speaker input provided and routed through an auxiliary input. Rear I/O. Model No. PMC-AUDIO-BP
Audio	SoundBlaster-compatible audio module capable of interfacing to a single stereo line input, stereo auxiliary input, microphone, and a mono input, as well as amplifier-driven stereo speaker outputs, hardware volume control, and a mono output. ITTL level PC speaker input provided and routed through an auxiliary input. Front panel/rear I/O. Model No. PMC-AUDIO-FP

Technobox Tel: (609) 267-8988

Function Description

PMC-to-PCI
Adapter
for Delivery Adapts a single-wide PMC to a standard PCI board for desktop PCs. Used as a delivery vehicle for PMCs in a PCI environment. Part No. 1447

64-bit
PMC-to-PCI
Adapter Permits delivery of PMC-derived applications in a standard PCI environment. Card fits a short-length PCI board. Specifically designed to improve PCI bus signal integrity while retaining the convenience of a passive adapter. Fan helps cool PMC, especially useful for higher-powered cards. Part No. 2938

PMC-to-PCI
Adapter
for Test Adapts a single PMC to a standard PCI board for desktop PCs. Used for engineering and production testing of PMC boards. Supports 32- and 64-bit PCI. DIN connector for PMC rear I/O access. Part No. 3390

Bridged
64-bit 66MHz
PMC-to-PCI
Adapter Accepts a single PMC. Features a 21154 PCI-to-PCI bridge chip to assure PCI bus signal integrity, even when multiple adapters are plugged into a PCI segment. Operates at 33MHz or 66MHz on either the primary or secondary side of bridge. Any mix of 32-bit and 64-bit. User selectable secondary PCI signaling. Part No. 3673

Bridged
64-bit 66MHz
PMC-to-PCI
Adapter
with 3.3volt
DC-to-DC
Converter Similar to P/N 3673, but features a 3.3 volt switching DC-to-DC converter to convert 5 volt power to 3.3 volt for the mounted PMC. Part No. 3674

Metering
PMC-X to PCI-X
Adapter
with PIM
Support Development tool for debugging and/or demonstrating performance of a PMC or PMC-X card in a standard PCI or PCI-X slot. Both standard PCI signaling (32/64bit, 33/66 MHz) and PCI-X signaling (32/64bit, 66/100/133 MHz) are supported. Allows attachment of PMC I/O Card. Part No. 4311

Bridged
PMC-X to PCI-X
Adapter Adapter with PCI-X to PCI-X bridge permits delivery of PMC-derived applications in a standard PCI or PCI-X environment. Both PMC and PMC-X boards of any signaling level, clock frequency, and bus width are supported. 31154 PCI to PCI bridge chip assures PCI bus signal integrity even with multiple adapters plugged into a single PCI bus segment.. Part No. 4352

64-bit
PMC-to-PCI
Adapter for
Delivery Systems Passive PMC to PCI Adapter permits delivery of PMC-derived applications in a standard PCI environment. LEDs visible from the back of the board monitor power and key PCI bus signals. One LED senses the VIO signal voltage to indicate if the slot uses 3.3V or 5V PCI bus signaling. Part No. 4366

Fan Assembly
for P/Ns 3673
and 3674 Cooling fan assembly for use with P/Ns 3673 and 3674. Part No. 3675

PCMCIA-to-PMC
Adapter Permits use of Type I (3mm) or Type II (5mm) PCMCIA card in single wide PMC slot. Mechanical design conforms to PMC component envelope. Inserted card can be locked in place to prevent removal. For modems, CompactFlash cards, and more. Part No. 1473

PCI-X to PMC-X
Adapter Adapts a standard PCI and PCI-X board to PMC form factor for engineering development. Accelerates development of PMC (e.g., software design). Accommodates both 32-and 64-bit / 33 and 66 MHz. LEDs, logic analyzer interface. Separate versions for 3.3 volt and 5.0 volt. Part No. 4044

Metering
PMC-to-PMC
Extender Extends PMC under test beyond host board front panel for probe access to both sides of PMC. Supports 64-bit/66 MHz. Provides test points for select PCI bus signals. Part No. 3954

PMC
Preprocessor Pre-processor/PMC-to-PMC extender that permits access to both sides of PMC for testing. Supports 64-bit/66 MHz. Includes PCI bus decomposition software for use with HP Series 16xxx Logic Analyzer (e.g., HP 1650, 16500, etc.). Part No. 3770

Socket
Saver/
Elevator Inexpensive protection device avoids wear and tear on expensive engineering tools. Also elevates PMC by 10mm. Part No. 2283

SCSI Ultra2
LVD/SE PMC
Interface
Module
(PIM) Rear I/O interface for SCSI PMCs (e.g., P/Ns 2044, 3145, and 3156). Converts the PN4 signals to 68-pin SCSI connector. Part No. 3188

Dual 10/100-TX
Ethernet PMC
Interface
Module (PIM) Rear I/O interface for Ethernet PMCs (e.g., P/N 2894). Provides dual RJ45 connectors. Part No. 3189

Generic
PMC
Interface
Module
(PIM) Rear I/O interface for 'other' PMCs. Converts the PN4 signals to 68-pin SCSI connector. Part No. 3190

Function	Description
PMC-to-PCI Adapter for Delivery	Adapts a single-wide PMC to a standard PCI board for desktop PCs. Used as a delivery vehicle for PMCs in a PCI environment. Part No. 1447
64-bit PMC-to-PCI Adapter	Permits delivery of PMC-derived applications in a standard PCI environment. Card fits a short-length PCI board. Specifically designed to improve PCI bus signal integrity while retaining the convenience of a passive adapter. Fan helps cool PMC, especially useful for higher-powered cards. Part No. 2938
PMC-to-PCI Adapter for Test	Adapts a single PMC to a standard PCI board for desktop PCs. Used for engineering and production testing of PMC boards. Supports 32- and 64-bit PCI. DIN connector for PMC rear I/O access. Part No. 3390
Bridged 64-bit 66MHz PMC-to-PCI Adapter	Accepts a single PMC. Features a 21154 PCI-to-PCI bridge chip to assure PCI bus signal integrity, even when multiple adapters are plugged into a PCI segment. Operates at 33MHz or 66MHz on either the primary or secondary side of bridge. Any mix of 32-bit and 64-bit. User selectable secondary PCI signaling. Part No. 3673
Bridged 64-bit 66MHz PMC-to-PCI Adapter with 3.3volt DC-to-DC Converter	Similar to P/N 3673, but features a 3.3 volt switching DC-to-DC converter to convert 5 volt power to 3.3 volt for the mounted PMC. Part No. 3674
Metering PMC-X to PCI-X Adapter with PIM Support	Development tool for debugging and/or demonstrating performance of a PMC or PMC-X card in a standard PCI or PCI-X slot. Both standard PCI signaling (32/64bit, 33/66 MHz) and PCI-X signaling (32/64bit, 66/100/133 MHz) are supported. Allows attachment of PMC I/O Card. Part No. 4311
Bridged PMC-X to PCI-X Adapter	Adapter with PCI-X to PCI-X bridge permits delivery of PMC-derived applications in a standard PCI or PCI-X environment. Both PMC and PMC-X boards of any signaling level, clock frequency, and bus width are supported. 31154 PCI to PCI bridge chip assures PCI bus signal integrity even with multiple adapters plugged into a single PCI bus segment.. Part No. 4352
64-bit PMC-to-PCI Adapter for Delivery Systems	Passive PMC to PCI Adapter permits delivery of PMC-derived applications in a standard PCI environment. LEDs visible from the back of the board monitor power and key PCI bus signals. One LED senses the VIO signal voltage to indicate if the slot uses 3.3V or 5V PCI bus signaling. Part No. 4366
Fan Assembly for P/Ns 3673 and 3674	Cooling fan assembly for use with P/Ns 3673 and 3674. Part No. 3675
PCMCIA-to-PMC Adapter	Permits use of Type I (3mm) or Type II (5mm) PCMCIA card in single wide PMC slot. Mechanical design conforms to PMC component envelope. Inserted card can be locked in place to prevent removal. For modems, CompactFlash cards, and more. Part No. 1473
PCI-X to PMC-X Adapter	Adapts a standard PCI and PCI-X board to PMC form factor for engineering development. Accelerates development of PMC (e.g., software design). Accommodates both 32-and 64-bit / 33 and 66 MHz. LEDs, logic analyzer interface. Separate versions for 3.3 volt and 5.0 volt. Part No. 4044
Metering PMC-to-PMC Extender	Extends PMC under test beyond host board front panel for probe access to both sides of PMC. Supports 64-bit/66 MHz. Provides test points for select PCI bus signals. Part No. 3954
PMC Preprocessor	Pre-processor/PMC-to-PMC extender that permits access to both sides of PMC for testing. Supports 64-bit/66 MHz. Includes PCI bus decomposition software for use with HP Series 16xxx Logic Analyzer (e.g., HP 1650, 16500, etc.). Part No. 3770
Socket Saver/ Elevator	Inexpensive protection device avoids wear and tear on expensive engineering tools. Also elevates PMC by 10mm. Part No. 2283
SCSI Ultra2 LVD/SE PMC Interface Module (PIM)	Rear I/O interface for SCSI PMCs (e.g., P/Ns 2044, 3145, and 3156). Converts the PN4 signals to 68-pin SCSI connector. Part No. 3188
Dual 10/100-TX Ethernet PMC Interface Module (PIM)	Rear I/O interface for Ethernet PMCs (e.g., P/N 2894). Provides dual RJ45 connectors. Part No. 3189
Generic PMC Interface Module (PIM)	Rear I/O interface for 'other' PMCs. Converts the PN4 signals to 68-pin SCSI connector. Part No. 3190

TEWS Technologies Tel: +49 4101 4058-0, (775) 686 6077

Function Description

Slot PC Card
Interface One 68 pin PC Card slot supporting memory and I/O cards of type I and II, accessible through front panel (TPMC871-10), no front panel (TPMC871-11)

Slot PC Card
Interface Up to two PC Card/CardBus Sockets with hot insertion and removal, supports memory and I/O cards of type I, II and III (second socket only); Various module versions with different mountings; -40°C to +85°C (TPMC872)

Function	Description
Slot PC Card Interface	One 68 pin PC Card slot supporting memory and I/O cards of type I and II, accessible through front panel (TPMC871-10), no front panel (TPMC871-11)
Slot PC Card Interface	Up to two PC Card/CardBus Sockets with hot insertion and removal, supports memory and I/O cards of type I, II and III (second socket only); Various module versions with different mountings; -40°C to +85°C (TPMC872)

VMETRO Tel: (281) 584-0728, +47 22 10 60 90

Function Description

PMC Bus
Analyzer Vanguard PMC Networked Bus Analyzer is a complete solution for PCI/PCI-X analysis, exercising, protocol detection, and compliance checking in a PMC environment. Includes a 10/100 Mbit/s Ethernet interface, 0-100 MHz PCI-X and 0-67 MHz PCI for PMC systems, 3.3V and 5V support, 2M Sample Trace Buffer at 256 bits, Trace Collapse/Expand, Concurrent and independent operation of all functions, Automatic Protocol Checker, Enhanced Exerciser, Compliance Checker. Model No. VG-PMC

Function	Description
PMC Bus Analyzer	Vanguard PMC Networked Bus Analyzer is a complete solution for PCI/PCI-X analysis, exercising, protocol detection, and compliance checking in a PMC environment. Includes a 10/100 Mbit/s Ethernet interface, 0-100 MHz PCI-X and 0-67 MHz PCI for PMC systems, 3.3V and 5V support, 2M Sample Trace Buffer at 256 bits, Trace Collapse/Expand, Concurrent and independent operation of all functions, Automatic Protocol Checker, Enhanced Exerciser, Compliance Checker. Model No. VG-PMC

VMIC Tel: (256) 880-0444, (800) 322-3616

Function Description

Sound
Card Single,high-performance,mixed-signal,16-bit stereo. PCI parallel bus interface,version 2.1. High-quality ESFM music synthesizer, dynamic range (SNR)over 80 dB, integrated Spatializer 3-D audio effects processor. Model No. VMIPMC-7440

Audio Site-based Sound Blaster board, PMC signaling 5V only, PCI-based sound chip, four standard jacks on PMC front panel. Model No. VMIPMC-0567-000

Function	Description
Sound Card	Single,high-performance,mixed-signal,16-bit stereo. PCI parallel bus interface,version 2.1. High-quality ESFM music synthesizer, dynamic range (SNR)over 80 dB, integrated Spatializer 3-D audio effects processor. Model No. VMIPMC-7440
Audio	Site-based Sound Blaster board, PMC signaling 5V only, PCI-based sound chip, four standard jacks on PMC front panel. Model No. VMIPMC-0567-000

Return To PMC Index / Return To Mezzanine Directory Index / Return To VME Directory Main Page