PMC Networking Modules

AcQ InduCom Tel: +31-412-641922
FunctionDescription
10/100 Mbps
Ethernet
Adapter
Designed to interface with any suitable PMC compliant carrier, using a PCI version 2.1 compliant interface (IEEE P1386.1 Draft 2.0). Capable of operating as 10BASE-T (IEEE 802.3) or 100BASE-Tx (IEEE 802.3u) via a front mounted standard RJ45 connector. Model Number PMC400

ACT/TECHNICO Tel: (215) 956-1200
FunctionDescription
Quad
10/100Base T
Ethernet
Controller
Available in 32-bit/33 MHz or 64-bit/66 MHz versions. RJ-45 for CAT 5 unshielded twisted pair (UTP). Universal 3.3 and 5v PCI, 8W. Options for front I/O or rear I/O via PIM. One LED indicator per port. Model No. 8701

ACTIS Computer Tel: +41 22 706-1830, (480) 838-1799
FunctionDescription
Dual
Gigabit
Ethernet
Dual Gigabit Ethernet Controller with 1000Base-TX CAT5 cooper interface. 64-bit/66 MHz interface for optimum performance. 64 KByte FIFO. IEEE802.3ab compliant. Model No PLAN-1200

Aitech Defense Systems Tel: (888) AITECH-8 (248-3248), (818) 350-6800
FunctionDescription
Quad
Ethernet
Interface
(10/100 Mb/s)
and Hub
Integrates four IEEE 802.3/802.3u 10BASE-T/100BASE-Tx Ethernet channels and four port Ethernet repeater (Hub). All channels may be routed to either the front panel or PMC I/O connector. Conduction and air-cooled versions. Model No. M610

CES-Creative Electronic Systems Tel: +41.22.884.51.00
FunctionDescription
ATM
Sustained 155 Mbits/s on ATM, AAL2, AAL5, TCP/UDP-IP, cell scheduling for traffic shaping, 64-bit PCI DMA master, up to 80 MBytes/s burst DMA rate. Supports OC12, OC3, E3 / T3, E1 / T1 / J1, J2 and signalling stack. Model No. OC12: ATM 8473, 4 x OC3: ATM 8471, OC3: ATM 8470, ATM 8488, E3 / T3: ATM 8489, E1 / T1 / J1: ATM 8487, J2: ATM 8486
Gigabit
Ethernet
10/100/1000 Base-Tx Ethernet on a RJ45 connector or Gigabit Ethernet 1000 Base-Sx on a MTRJ connector. TCP/UDP-IP. Model No. GETH 8479
Dual Fast
Ethernet
Dual 10/100 Base-Tx Ethernet on two RJ45 connector. TCP/UDP-IP. Model No. FETH 8498
Fast Ethernet
10/100 Base-Tx Ethernet on a RJ45 connector. TCP/UDP-IP. Model No. FETH 8478

Concurrent Technologies Inc. Tel: +44 1206 752626, (734) 971-6309
FunctionDescription
Dual10/100Mbps
Ethernet
Uses 82551QM Ethernet Controller supporting 10/100Mbps Ethernet Interface. Twisted pair, RJ45 connector. Model No. CL PMC/551
Dual Gigabit
Ethernet
Uses Intel 82546GB Dual Gigabit Ethernet controller; copper interface via dual RJ45; 10BaseT, 100BaseTX or 1000Base-T Ethernet interface; 32/64-bit 33/66MHz PCI, 3.3/5V PCI signalling. Model No. CL PMC/GB3
Dual Gigabit
Fiber Ethernet
Uses 2 x Intel¨ 82543 Gigabit Ethernet controllers, fiber interface via dual SC optical supporting the IEEE 802.3z Gigabit Ethernet standard. Model No. CL PMC/GB2
Dual Gigabit
Ethernet
Uses 2 x Intel¨ 82543 Gigabit Ethernet controllers, copper interface via dual RJ45 connectors supporting 10BaseT, 100BaseTX or 1000Base-T Ethernet interface. Model No. CL PMC/GB1
10/100Mbps
Ethernet
Uses Digital 21143 device. 10/100Mbps Ethernet Interface. Twisted pair, RJ45 connector. Model No. CL PMC/100

Extreme Engineering Solutions Tel: (608) 833-1155
FunctionDescription
Three 10/100
Fast Ethernet
PrPMC
MPC8250/8260 PowerQuicc II. Three 10/100Mbps Fast Ethernet interfaces through front panel or rear I/O. Opt. buffered offcard processor bus. 200MHz G2 Core. 32-256MB SDRAM with ECC. 4-16MB Flash memory. VxWorks, Linux support. Model No.XPort3000

General Micro Systems Tel: (909) 980-4863, (800) 307-4863
FunctionDescription
Ethernet
Support for dual Fiber or Copper Gigabit Ethernet. Up to 4Gb/s data transfer rate. Support for SC-type Fiber connectors. Unique Fiber support mode for baseboard Ethernet channels. Model No. Dual Gigabit Laser
Ethernet
Up to Eight Channels of 10/100Base-Tx Ethernet Ports (Full-Duplex). Utilizes Intel 82559ER Integrated MAC/PHY Controller. Four RJ-45 for Direct Front Panel Access. Four Channels on Rear Panel I/O. Model No. Enet-VIII Octopus

Interface Concept Tel: +33(0)2-98-573 030
FunctionDescription
Dual Giga Ethernet
PMC module providing 2* Giga Ethernet ports. Model No. IC-2GB-PMCa
Intelligent
Multi-channel
Fast Ethernet
Controller
On-board PowerQuiccII MPC8250 to off-load protocol processing from host, three auto-sensing Fast Ethernet controllers 10/100TX routed to RJ45 connectors on front panel, four additional high-speed serial ports available on PMC I/O, to use as 10Mbs Ethernet, HDLC synchronous links or E1/T1 buses, 64-bit, 66-MHz PCI host interface. Commercial and extended Temp range. Model No. IC-ETH-PMCa

Radstone Embedded Computing Tel: (800) 368-2738, +44 (0) 1327-359444
FunctionDescription
Multifunction
I/O
Multi-function PMC based on Marvell Discovery III, 3 copper Ethernet ports, (2 ports optionally optical), 4 serial ports RS232/422/485, 2 optional Firewire (1394b) ports. Commercial ext. temp and rugged versions. Model PMCD3
Ethernet
Switch
Rear I/O 8 port 10/100 + 1 port 10/100/100 BASE-T layer 2 Ethernet switch combined with gigabit Ethernet adapter, commercial, Ext. Temp, Rugged and Conduction cooled versions. Model No. PMCE3R
2 CAN Bus
2 optically isolated CAN bus interfaces with bit rates to 1Mbit on each channel. Full BIT support. Commercial, Ext. Temp and Rugged versions. Optional MIC bus interface. Model No. PMC CAN

SBS Technologies Tel: (505)-875-0600
FunctionDescription
Gigabit
Ethernet
Dual fiber Gigabit Ethernet network interface card with LC interface. 1000BaseSX protocol. 32/64-bit 33/66 MHz PCI, 66/133 MHz PCI-X PMC. Model No. PMC-GBIT-DF2AA
Gigabit
Ethernet
Dual fiber Gigabit Ethernet interfaces. 32/64 bit 33/66 MHz PCI, 66/133 MHz PCI-X PMC. 1000BaseLX protocol. LC single mode 1300nm transceivers. Model No. PMC-GBIT-DF2BB
Gigabit
Ethernet
Single fiber Gigabit Ethernet network interface card with LC multi-mode 850nm transceiver. 1000BaseSX protocol. 32/64 bit 33/66 MHz PCI, 66/133 MHz PCI-X PMC. Model No. PMC-GBIT-SF2A
Gigabit
Ethernet
Single fiber Gigabit Ethernet interface. 32/64-bit 33/66 MHz PCI,66/133 MHz PCI-X PMC. 1000BaseSX protocol. LC multi-mode 1300nm transceiver. Model No. PMC-GBIT-SF2B
Gigabit
Ethernet
Single fiber Gigabit Ethernet interface. 32/64 bit 33/66 MHz PCI, 66/133 MHz PCI-X PMC. 32/64 bit 33/66 MHz PCI, 66/133 MHz PCI-X PMC. 1000BaseSX protocol. Model No. PMC-GBIT-SF2D
Gigabit
Ethernet
Single fiber Gigabit Ethernet interface. 32/64 bit 33/66 MHz PCI, 66/133 MHz PCI-X PMC. 1000BaseLX protocol. SC single mode 1300nm transceiver. Model No. PMC-GBIT-SF2E
Dual
Gigabit
Ethernet
Dual 10BaseT/100BaseTX/1000BaseT network . 32/64-bit 33/66 MHz PCI, 66/133 MHz PCI-X PMC. LED indicators for link, speed and activity. Auto-negotiating protocol selection. Model No. PMC-Gigabit-DT2
Gigabit
Ethernet
10BaseT/100BaseTX/1000BaseT network interface card. 32/64-bit 33/66 MHz PCI, 66/133 MHz PCI-X PMC. LED indicators for link, speed, and activity. Auto-negotiating protocol selection. 4 channels. Model No. PMC-Gigabit-ST3
Gigabit
Ethernet
Single Gigabit fiber 1000Base-SX Ethernet network interface card. 32/64-bit 33/66 MHz PMC. Single Gigabit Ethernet MT-RJ interface. Model No. PMC-GBIT-SFMT
Gigabit
Ethernet
Conduction cooled. Dual 10BaseT/100BaseTX/1000BaseT. Interface card with rear panel access. Model No. PMC-GBIT-DT2CC
Gigabit
Ethernet
Single Gigabit fiber 1000Base-SX Ethernet network interface card. Single Gigabit Ethernet SC interface. Model No. PMC-GBIT-SFSC
Gigabit
Ethernet
Single Gigabit fiber 1000Base-SX Ethernet network interface card. Single Gigabit Ethernet LC interface. Model No. PMC-Gigabit-SF
Gigabit
Ethernet
10BaseT/100BaseTX/1000BaseT Network Interface Card (NIC). Supports jumbo frames up to 15 KB wide. Model No. PMC-GIGABIT-ST
Gigabit
Ethernet
10BaseT/100BaseTX/1000BaseT Network Interface Card (NIC). Supports jumbo frames up to 15 KB. Model No. PMC-Gigabit-ST2
Ethernet
Two 10BaseT/100BaseTX Ethernet ports. Rear I/O. Model No. PMC-3101-BP
Ethernet
4 independent Fast Ethernet interfaces for 10 Mb/s and 100 Mb/s networks. Features rear I/O.Model No. PMC-3104-BP
Ethernet
4 independent Fast Ethernet interfaces for 10 Mb/s and 100 Mb/s networks. Features LC fiber connectors and front panel I/O. Model No. PMC-3104-FBR
Ethernet
Dual 10BaseT/100BaseTX/1000BaseT network. Interface card w/rear panel access. Model No. PMC-GBit-DT2BP
Ethernet
Two 10BaseT/100BaseTX Ethernet ports. Two 10BaseT/100BaseTX Ethernet ports. Model No. PMC-3101-BP-CC
Ethernet
One 10BaseT/100BaseTX Ethernet port. Front-panel I/O via RJ45 or rear-panel I/O via P4 . Model No. PMC-100BT-FP
Ethernet
Two 10BaseT/100BaseTX Ethernet ports. Front-panel I/O via RJ45 or rear-panel I/O via P4 . Model No. PMC-3101-FP
Ethernet
One 10BaseT/100BaseTX Ethernet tap. Front-panel input via RJ45 connectors. Signals pass between ports regardless of power. Model No. PMC-3102
Ethernet
Four 10BaseT/100BaseTXEthernet ports. Front-panel or rear I/O. Wake-On-LAN. Model No. PMC-3104-FP
CAN
Dual CAN 2.0 controllers. Model No. PMC-ECAN-2
ARCNET
COM20020 ARCNET interface controller, which includes a transceiver and dual port RAM. Isolated RS-485 differential interface with DC/DC converter. Model No. PMC-ARCNET
ARCNET
COM20020 ARCNET interface controller, which includes a transceiver and dual port RAM. Traditional isolated hybrid interface. Model No. PMC-ARCNET-STD
WAN
PMC
Adapters
Wide range of interfaces supported: V.35/X.21/EIA530, T1/E1/J1, HSSI, DS3/E3. Supports up to 4 physical ports. Model No. MAXIM 520
WAN
PMC
Adapters
Octal multi-interface: X.21, V.35, RS-232. Octal T1/E1 interface; hybrid quad T1/E1 + quad multi-interface; dual HSSI; dual DS3/E3. Aggregate data rate of 64 Mbps. Model No. MAXIM 600 Line

Systran Corporation Tel: (513) 252-5601
FunctionDescription
Fibre Channel
Network
Part of a family of Fibre Channel host bus adapters. Fibre Channel networks provide up to 1.0625Gb/s baud rates and data throughput up to 100MB/s. Also available for PCI, VME and SBus-based computers, Model No. FibreXpress Network PMC
Shared Memory
Network
Replicated shared-memory network. SCRAMNet+ cards are also available for VME (3U/6U/9U). Data transfer rate is 150Mb/s and throughput is up to 16.7MB/s. Model No. SCRAMNet+ Network PMC

Technobox, Inc. Tel: (609) 267-8988
FunctionDescription
10 Mb/s
Ethernet
10B2/AUI
10 Mb/s Ethernet connection; either AUI or 10Base2. Interface selection can be changed in the field. AUI interface connectivity front (dsub15) and rear (PN4). 10Base2 is front only via an AUI-to-10Base2 MAU. Part No. 2919
10/100TX
Ethernet
Adapter
Single-port 10/100TX Ethernet PMC. RJ45 jack and status/activity indicator LEDs on front panel. AMD 79C973 chipset. Part No. 2894
10/100-TX
Ethernet
Adapter with
Front &
Rear I/O
Single-port 10/100-TX Ethernet. Intel 82559. Both front and rear I/O as determined by DIP switch settings. RJ45 jack and status/activity indicator LEDs on front panel. On-board flash memory holds BIOS for booting. Part No. 3293
100-FX
Ethernet
Fiber Optic
(SC Duplex)
Single-port, fiber optic Ethernet adapter built around AMD 79C973. Fiber optic connector is SC Duplex style. Status/activity indicator LEDs on front panel. On-board flash memory for BIOS storage. Part No. 3006
100-FX
Ethernet
Fiber Optic
(ST TX/RX)
Single-port, fiber optic Ethernet adapter built around AMD 79C973. Fiber optic connector is ST TX/RX style. On-board flash memory for BIOS storage. Part No. 3059
10/100 Quad
Ethernet
Quad 10/100 Ethernet controller. 32b/66MHz. Built around 82551ER. Front Panel I/O. Part No. 4435
10/100 Quad
Ethernet
Quad 10/100 Ethernet controller. 32b/66MHz. Built around 82551ER. Rear I/O. (See also compatible PIM - P/N 4516.) Part No. 4518
10/100 Quad
Ethernet
Quad 10/100 Ethernet controller. Features 31154 bridge chip. Built around 82551ER. Front Panel I/O. Part No. 4530
10/100 Quad
Ethernet
Quad 10/100 Ethernet controller. Features 31154 bridge chip. Built around 82551ER. Rear I/O. (See also compatible PIM - P/N 4516.) Part No. 4531

TEWS Technologies Tel: +49 4101 4058-0, (775) 686 6077
FunctionDescription
Ethernet
Interface
Based on Intel 21143 Controller. 10/100BaseT on RJ45 connector and 10Base2 on BNC connector. Both connectors and status LEDs mounted in front panel; -0°C to +70°C (TPMC880-10)
Ethernet
Interface
Based on Intel 21143 Controller. 10/100BaseT interface on RJ45 connector. Connector and status LEDs mounted in front panel; 0°C to +70°C (TPMC880-11)
Ethernet
Interface
Based on Intel 21143 Controller. 10Base2 interface on BNC connector. Connector and status LED's mounted in front panel; 0°C to +70°C (TPMC880-12)
10/100Mbits
Ethernet
Interface
Based on Intel 82551ER/8255IT Controller; 10BaseT/100BaseTx, half or full-duplex; 3Kbyte transmit and receive FIFOs; RJ45 connector; Status LEDs; Controller supports DMA cycles as bus master. Model No. TPMC881-10 (0°C to +85°C), TPMC881-10-ET (-40°C to +85°C)
10/100Mbits
Ethernet
Interface
Same as TPMC881-10, but Back I/O via P14 Model No. TPMC881-11 (0°C to +85°C), TPMC881-11-ET (-40°C to +85°C)
4 Channel
10/100Mbit/s
Ethernet
Based on Intel 82551IT Controller; IEEE802.3 compliant LAN interface; 10BaseT/100BaseTx interface, half or full-duplex; 3 Kbyte transmit and receive FIFOs; Status LEDs; Controller supports DMA cycles as bus master; -40°C to +85°C. Network connection via RJ45 connector (TPMC882-10), Back I/O via P14 (TPMC882-11)
Gigabit
Ethernet
Interface
Based on Intel 82545EM Controller; 10/100/1000BaseTx on RJ45 connector with status LED's in front panel; 0°C to +70°C. One channel (TPMC883-10), Dual channel (TPMC884-10)
Isolated
2x CAN
Conduction
Cooled
2 channel High Speed CAN interface; 2 Philips SJA1000 CAN controller, CAN specification 2.0B; TJA1050 transceiver; Channels isolated from system logic and from each other; On board termination option for each CAN bus channel; P14 I/O; conduction cooled PMC; -40°C to +85°C (TPMC310-10)
CAN Interface
Conduction
Cooled
Two independent CAN Bus Controller supporting standard and extended frames according to CAN specification 2.0 part A and B; Channels Isolated against each other; P14 I/O; 40°C to +85°C. Physical interface optically isolated CAN-High-Speed - ISO11898. (TPMC316-10), Physical interface optically isolated modified RS485 (TPMC316-11)
Isolated
2x CAN Bus
2 CAN bus interfaces based on Philips SJA1000; CAN High Speed (ISO11898-2); optically isolated from CAN controller for each channel; transfer rate 1Mbit/s maximum (bus length up to 30m); DB9 male front connectors with pinout following CiA DS-102, parallel to rear connector P14; -40°C to +85°C (TPMC810-10)
1 or 2 Channel
CANbus
Interface
One or two independent CAN Bus Controller supporting standard and extended frames according to CAN specification 2.0 part A and B; Physical interface optically isolated; CAN-High-Speed (ISO11898) or modified RS485; Isolated against each other; DB 9 connector in front panel and P14 I/O; -40°C to +85°C. 2 Channel (TPMC816-10), 1 Channel TPMC816-11)
6, 4 or 2
CANbus
Controller
Six, four or two CAN Bus Controller supporting standard and extended frames according to CAN specification 2.0 part A and B; Physical interface: CAN-High-Speed ( ISO11898 ); DB 25 pol mounted in front panel; 0°C to +70°C. Six (TPMC901-10), Four (TPMC901-11), Two (TPMC901-12)
ARCNET
Interface
COM20020 ARCNET controller, 5 Mbps; Traditional hybrid interface; BNC and D-SUB 9 mounted in front panel; 0°C to +70°C (TPMC815-11), Isolated RS485 interface; two D-SUB 9 mounted in front panel (TPMC815-21)

Thales Computers Tel: +33 (0)4 98 16 34 00 - (732) 494 1010
FunctionDescription
Ethernet
10/100 NIC
10/100BaseT network interface card (NIC) on low profile RJ.45 jack. Ethernet 10Base5 (AUI) on SubD connector. Full duplex Ethernet 10/100BaseT capability. Supports AUI, 10BaseT and 100BaseT auto detection. Model No. CPMC-ETHx
ATM Network
Adapter
WAN and LAN ATM multi-platform adapter. 155Mbps plus ATM network connection for PMC-based systems. IDT 77211/77252 NICStar chip; 4096 VP/VC segmentation and reassembly controller; 32-bit master/slave PCI interface; IEEE P1386/1386.l Standard. Size: 149x74mm, one slot. Model No. CPMC-ATM
ATM Controller
32 bit PCI/PMC mstr/slv; low latency DMA; sustained 155 Mbps either on UTP5, MMF or SMF. Full duplex SAR 4k simultaneous VP/VC (16K with option) for AAL0, AAL3/4 or AAL5. Supports Raw-Cell format; ABR, CBR, VBR and UBR capabilities. TCP/IP and Native-ATM s/w interface on AIX, LynxOS, VxWorks. Model No. CPMC-ATM
ATM Controller
32 bit PCI/PMC mstr/slv; low latency DMA; sustained 25.6 Mbps on UTP3. Full duplex SAR 4k simultaneous VP/VC (16K with option) for AAL0, AAL3/4 or AAL5. Supports Raw-Cell format; ABR, CBR, VBR and UBR capabilities. TCP/IP and Native-ATM s/w interface on AIX, LynxOS, VxWorks. Model No. CPMC-ATM

VMIC Tel: (256) 880-0444, (800) 322-3616
FunctionDescription
Reflective
Memory
Network
Reflective Memory fiber-optic (170 Mbaud serially). PCI target burst supported w/33MB/s transfer rates, data transferred at 6.2 MB/s w/o redundant transfer and 3.2 MB/s w/redundant transfer. IEEE 1386.1 PMC compatible and has networking compatibility w/ 5576 family on VME, PCI, CPCI, Muiltbus, and GE90-30 buses. Model No. VMIPMC-5576XL
Reflective
Memory
Network
13.4 Mybte/s Fiber-Optic Reflective Memory w/interrupts, 64 Mbyte reflective memory, multi mode and single mode available. Model No. VMIPMC-5579
Ultrahigh
Speed
Fiber-Optic
Reflective
Memory
w/Interrupts
High-speed, easy-to-use fiber-optic network (2.12 Gbaud serially), data written to memory in one node is also written to memory in all nodes on the network, up to 256 nodes, connection with multimode fiber up to 300 m, single-mode fiber up to 10 km, dynamic packet size, 4 to 64 bytes of data, tTransfer rate 43 Mbyte/s (4 byte packets) to 174 Mbyte/s (64 byte packets), 64 Mbyte or 128 Mbyte SDRAM Reflective Memory, two independent DMA channels, any node on the network can generate an interrupt in any other node on the network or in all network nodes with a single command, eError detection, nNo processor overhead, nNo processor involvement in the operation of the network, PCI 64-bit 66 MHz transfers, 3.3 or 5 V, single width mezzanine interface . Model VMIPMC-5565
Fibre
Channel
Adapter
Supports 100 Mbyte/s communications in all Fibre Channel topologies. 33MHz/66MHz, 64-bit PMC host bus interface. Based on Q-Logic ISP 2100a series chip. Model No. VMIPMC-5660
Fibre
Channel
Adapter
Supports 200 Mbyte/s full duplex communications in all Fibre Channel topologies (100 Mbtye/s simultaneous TX/RX). 33MHz/66MHz, 64-bit PMC host bus interface. Based on Q-Logic ISP 2200a series chip. Model No. VMIPMC-5661
Fibre
Channel
Adapterr
Single-width PMC module containing a single Fibre Channel host bus adapter (HBA) with redundant external ports, operates in three major modes: hub mode, redundant mode, and manual mode. Supports 200 Mbyte/s full-duplex communications in all Fibre Channel topologies (100 Mbyte/s simultaneous TX/RX, single external port active) 33MHz/66MHz, 64-bit PMC host bus interface. Model No. VMIPMC-5664
2 Gigabit
Fibre Channel
Host Bus
Adapter
2 gigabit Fibre Channel 66/33 MHz,64-bit PMC form factor, supports up to 400 Mbyte/s sustained Fibre Channel data transfer rate (200 Mbyte/s simultaneous receive and transmit), backward compatible to standard 33/66 MHz PCI, automatically negotiates the Fibre Channel bit rate (1 or 2 gigabit), supports Fibre Channel Arbitrated Loop (FC-AL),FC-AL-2,point-to-point, and switched fabric topologies, supports full-duplex communications in all Fibre Channel topologies. Model No. VMIPMC-5666
2 Gigabit Dual
Fibre Channel
Host Bus
Adapter
Dual channels Supports 400 Mbyte/s full-duplex communications in all Fibre Channel topologies (200 Mbyte/s simultaneous TX/RX), compliant with PCI Local Bus specification revision 2.2, support for F-PORT and FL-PORT fabric login, supports Fibre Channel protocol SCSI (FCP-SCSI)or Fibre Channel IP protocol, autonegotiation for legacy devices, supports TCP and UDP IP services, supports SCSI initiator/target and target modes, On-board ARM RISC processor, On-board dual 2 gigabit LC small form factor (SFF)transceivers, supports PCI dual-address and cache commands, supports multi-ID aliasing, fully backward compatible with 32-bit/33 MHz PCI bus. Model No. VMIPMC-5720
Gigabit
Ethernet
Adapter
Gigabit Ethernet adapter , 1000SX fiber interface via front panel SC duplex fiber connector, IEEE 802.3/802.3x/802.3z compliant, 64-bit/66 MHz interface for optimum performance, 64 Kbyte packet buffer, PCI revision 2.2 compliant, Universal PMC signaling operation. Model No. VMIPMC-6100
Gigabit
Ethernet
Adapter
Gigabit Ethernet adapter, 1000T CAT5 copper interface via front panel RJ45 connector, IEEE 802.3/802.3x/802.3z/802.3ab compliant, 64-bit/66 MHz interface for optimum performance, 64 Kbyte packet buffer, PCI revision 2.2 compliant, Universal PMC signaling operation. Model No. VMIPMC-6101


Return To PMC Index / Return To Mezzanine Directory Index / Return To VME Directory Main Page