AcQ InduCom Tel: +31-412-641922
| Function | Description |
|---|---|
| FPGA-based RS422 serial card with front and rear I/O. The standard configuration consists of a PCI-core and eight 16C650-uart compatible cores. Model Number PMC450 | |
| FPGA-based 16/24 channel serial card with front and rear I/O. Standard configuration consists of a PCI-core and sixteen (UART16) or twentyfour (UART24) 16C550-uart compatible cores. Software configurable physical interface. offers the possibility to create a combination of RS232 and RS422/RS485 on one card. Model number PMC451 |
Acromag, Inc. Tel: (248) 295-0310
| Function | Description |
|---|---|
| Eight asynchronous EIA/TIA-232E serial ports, 64-byte FIFO buffers, interrupt support, programmable baud rate (up to 230Kbps), -40° to 85°C option. Model No. PMC520 | |
| Eight asynchronous full duplex EIA/TIA-422B serial ports (supports EIA-485), 64-byte FIFO buffers, interrupt support, programmable baud rate (up to 921.6bps), -40° to 85°C option. Model No. PMC521 |
ACTIS Computer Tel: +41 22 706-1830, (480) 838-1799
| Function | Description |
|---|---|
Opto-Isolated UART | Octal Universal Asynchronous Receiver Transmitter (UART). 2.5 kV opto-isolated interface. Software selectable interface with RS-232 and RS-422/485. RS-232 signals: TxD, RxD, RTS, CTS, DTR, DCD, DSR. RS-422/485 signals: TxD, RxD. 15 kV ESD protection. 64 Byte RxFIFO and 64 Byte TxFIFO per channel. Data rate up to 6.25 Mbps @ RS-422/482, and up to 230.4 kbps @ RS-232. On-board network terminations. I/O signals available on front connections (rear connections on request only). Model No PSCC-1008E |
Communication Controller | Support up to four Serial Communication Controllers. Interface with RS-232/422/485, software configurable. 8-channel DMA controller for optimum performance. Support synchronous and asynchronous transmission modes, max 10 Mbps. Signal I/Os available either for front rear connections. Model No PSCC-1104 |
Aitech Defense Systems Tel: ((888) AITECH-8 (248-3248), (818) 350-6800
| Function | Description |
|---|---|
Serial & Parallel I/O | Based on MPC8260 PowerQUICC II Communication Controller. Supports IRIG 106 standard PCM data structure and signal specifications compliance at data rates to 5Mbps, three RS-422 serial channels capable of synch and asynch operations at rates to 2.5Mbps and 23 separately programmable differential RS-422 parallel I/O channels (16 are interrupt capable). All I/O routed to PMC I/O connector. Conduction and air-cooled versions. Model No. M457 |
Concurrent Technologies Inc. Tel: +44 1206 752626, (734) 971-6309
| Function | Description |
|---|---|
Communications Controller | 4 x RS-422/485 asynchronous serial channels, 4Mbps, 5W max, front/rear I/O, utilizes the OXmPCI954 quad UART chip, 16C550 compatible, 32-bit 33MHz PCI, 3.3/5V PCI signalling. Model No. CC PMC/RS1-50 |
Communications Controller | 4 x RS-232 asynchronous serial channels, 230Kbps, IEEE-1284 parallel port, 2.5W max, front/rear I/O, utilizes the OXmPCI954 quad UART chip, 16C550 compatible, 32-bit 33MHz PCI, 3.3/5V PCI signalling. Model No. CC PMC/RS1-25 |
Curtiss-Wright Controls Embedded Computing - Subsystems (formerly VISTA Controls) Tel: (661) 257-4430
| Function | Description |
|---|---|
| Serial Communications interface: 8 serial channels. 4 RS-423 async (to 38.4 kbaud) and 4 RS-422 sync with DMA (to 4 Mbit/sec), 32K EEPROM. Model No. PSC8-CLX-XXX |
Extreme Engineering Solutions Tel: (608) 833-1155
| Function | Description |
|---|---|
Communications Controller MIL STD 188-114 | Uses MPC8250/8260 PowerQuicc II. Provides 6 high speed serial channels through front panel I/O. Four channels have software selectable RS232/RS422/RS423/RS485 and MIL-STD 188-114A in both DCE and DTE applications. Supports EIA530A (14 signals per port). Ideal for host managed solutions, as well as an intellegent controller running VxWorks or Linux. Model No. XPort1000 |
Communications Controller | Uses MPC8250/8260 PowerQuicc II. Provides 6 high speed serial channels through front and rear I/O. Four channels have software selectable RS232/RS422/RS423 and RS485 in both DCE and DTE applications. Supports EIA530A (14 signals per port). Ideal for host managed solutions, as well as an intellegent controller running VxWorks or Linux. Model No. XPort1001 |
General Micro Systems Tel: (909) 980-4863, (800) 307-4863
| Function | Description |
|---|---|
| Quad Synchronous/Asynchronous Serial I/O via Zilog Z16C30. Each Channel may be configured as RS232/RS422/RS485 in Balanced or Unbalanced Modes. Up to 10MBit/Sec in Synch. Mode, Up to 153.6KBit/Sec in Async. Mode Sustained on Each Channel. Model No. Quad SIO Commander |
General Standards Corporation Tel: (256) 880-8787
| Function | Description |
|---|---|
to 10Mbits/s | Zilog Z16C30, 128kbyte FIFOs, DMA, interrupts, RS-485/422/, 10Mbits on all four channels simultaneously. Async, Bisync, HDLC, 9-bit protocols. VxWorks Driver. Model No. PMC-SIO4A |
to 10Mbits/s | Zilog Z16C30, 128kbyte FIFOs, DMA, interrupts, RS-232, 10Mbits on all four channels simultaneously. Async, Bisync, HDLC, 9-bit protocols. VxWorks Driver. Model No. PMC-SIO4-RS232 |
Di-Phase Serial I/O | Full-duplex RS-422/ 485 serial I/ O. Each channel can operate up to 10M bits/s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provide smooth and efficient interface between serial interfaces and host computer. High-speed di-phase transmit/ receive implemented in an FPGA, provides for protocol flexibility. Full duplex DMA interface. Model No. PMC-HPDI32-DIPHASE |
Async I/O | Full-duplex RS-422/485 serial I/O board. Each channel can operate up to 10M bits/s. FIFO buffers up to 512K-byte for both transmit and receive. Features a full duplex DMA interface. Model No. PMC-HPDI32A-ASYNC |
Interface Concept Tel: +33(0)2-98-573 030
| Function | Description |
|---|---|
Communication Processor | The following PMC modules based on a MPC860P PowerPC can be used in conjunction with VMEbus or proprietary architecture. Both processing power and SDRAM allow these communication controllers to execute high speed protocols directly on-board. Protocols supported are: HDLC, TCP/IP on Ethernet, PPP, BOOTP, TELNET, etc. Extended temperature range and coating on request. The different configurations are: |
| 4 high speed asynch./synch. Ports independently software configurable (as RS232/422/485, EIA530A, V10, V11, X21,V35, V36) + 1 Ethernet 10/100 Mbs port available via the MPC860 connector MII port. Model No. IC-SER-PMCa | |
| 4 high speed asynch./synch. DTE/DCE Ports independently software configurable (as RS232/422/485, EIA530A, V10, V11, X21,V35, V36) + 1 Ethernet 10/100TX port available on the front panel. Model No. IC-SER-PMCb |
N.A.T. GmbH Tel: +49 2241/3989-0
| Function | Description |
|---|---|
Quad Serial I/O | Four serial I/O ports based on MPC860. Ports provided: RS232, RS422 and RS485 in every combination. Can be supplied with VxWorks or pSOS+ BSP on request. ETSI compatible LAPD/LAPB stack is available. LAPD s/w can access all 4 serial ports through the SCC channels of the MPC860. API for signalling s/w is avail currently running in a VxWorks environment |
Radstone Embedded Computing Tel: (800) 368-2738, +44 (0) 1327-359444
| Function | Description |
|---|---|
Communication | Ruggedized QUICC MP68360 based serial Communications PMC with 4 high-speed sync / async channels with optional DDC Enhanced Mini-Ace providing a single channel dual-redundant MIL-STD-1553 interface. Front and Rear I/O. Commercial, Ext. Temp and Rugged versions. Model No. PMCQ1 |
Communication | Ruggedized PowerQUICC II MPC8280-based serial communications PMC, 32 MBytes SDRAM, 16 MBytes Flash, four high-speed sync/async channels, four general purpose I/O lines, 10/100 Base-T Ethernet. Front and rear I/O. Commercial ext. temp and rugged versions. Model EPMCQ2 |
I/O | Multi-function PMC based on Marvell Discovery III, 3 copper Ethernet ports, (2 ports optionally optical), 4 serial ports RS232/422/485, 2 optional Firewire (1394b) ports. Commercial ext. temp and rugged versions. Model PMCD3 |
SBS Technologies Tel: (505)-875-0600
| Function | Description |
|---|---|
| 4 channels of opto-isolated asynchronous RS232 115 kbaud serial interface. ESD protection. 64-byte transmit and receive FIFOs per channel. Front panel I/O and P14 rear I/O. -40 to +85 C. Model No. PMC-OPTO232-ET | |
| 16 channels of asynchronous RS232 115 kbaud. 64-byte transmit and receive FIFOs per channel. ESD protection.Front panel I/O and P14 rear I/O. Model No. PMC-SERIAL232 | |
| Eight RS-232 asynchronous serial channels. I/O via front- or back-panel P4 connectors. Data rates to 115.2 kbaud. 128-byte FIFOs for receive and transmit on each channel. Model No. PMC-OCTPRO-232 | |
| 16 channels of asynchronous RS422 230 kbaud serial interface with FIFOs, ESD protection, and both front panel I/O and P14 rear I/O. Model No. PMC-SERIAL422 | |
| Eight RS-422 asynchronous serial channels. I/O via front- or back-panel P4 connectors. Data rates to 460.8 kbaud. 128-byte FIFOs for receive and transmit on each channel. Model No. PMC-OCTPRO-422 | |
| 4 channels of high performance, opto-isolated asynchronous RS422/485 460 kbaud serial interface. 64-byte transmit and receive FIFOs per channel. ESD protection. Front panel I/O and P14 rear I/O. -40 to +85 C. Model No. PMC-OPTO422-ET | |
| 16 high-performance asynchronous EIA-232 serial channels.Two octal UARTs with 16 bytes of transmit FIFO and 16 bytes of receive FIFO per channel. Up to 230.4 Kb/s supported. Model No. PMC-SWEET16 |
Technobox, Inc. Tel: (609) 267-8988
| Function | Description |
|---|---|
Async Communications Adapter | 8-port RS422 Asynchronous Communication Adapter. TXD, RXD, CTS, RTS on each of 8 ports. 16550 UARTs. Supports rear and front panel I/O. On board 150 ohm termination. Part No. 2316 |
Async Communications Adapter | 16 ports of 16550 UART based RS485 Async Communications.Rear or Front panel I/O. Option for on-board termination. Standard baud rates to 115Kbaud. Transient suppression on all RS485 lines. Part No. 2876 |
RS/232/422/485 Async Communications Adapter | Two 16550 based ports independently user configurable for RS232, RS422 or RS485 operation. Standard DB9 Male connectors out front panel. Baud rates to 115Kbaud. Part No. 2901 |
4-port RS422 Async Communications Adapter | 8-port Asynchronous Communication Adapter. Provides eight (8) 16550-based ports, with four (4) using RS232 signaling levels and four (4) using RS422 levels. Standard baud rates to 115Kbaud. Support for both front and rear I/O. Part No. 3101 |
Communications Adapter | Front and rear I/O. Ports configured for RS-232, RS-422 or RS-485 operation in any mix. Standard baud rates to 115Kbaud. 16550 UARTs. MicroD9 connectors on front panel. Part No. 2012 |
Communications Adapter | Front and rear I/O. RS-232 levels. Rates to 115Kbaud using 16550 UARTs. 8 x DB9 breakout panel available. Part No. 2229 |
Communications Adapter | Front and rear I/O. RS-232 levels. Rates to 115Kbaud using 16550 UARTs. 16 x RJ11 breakout panel available. Part No. 2238 |
TEWS Technologies Tel: +49 4101 4058-0, (775) 686 6077
| Function | Description | |
|---|---|---|
Synch/Asynch Serial Interface | 4 high speed synch/asynch serial interfaces based on Infineon PEF20534; I/O access; EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; Max. data rate: 10 Mbit/s (synch.), 2 Mbit/s (asynch), internal or external provided clock EIA-232 up to 115.2 kbit/s; -40°C to +85°C. 64 I/O lines on HD68 front connector, parallel to P14 (TPMC862-10), P14 I/O (TPMC362-20) | |
RS232 | 16 RS232 channels; Programmable baud rates: up to 921.6 kbps; Octal UART: Exar XR17D158; I/O Signals: TxD, RxD, RTS, CTS, GND; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; ESD protected transceiver (up to ±15KV); -40°C to +85°C (TPMC460-10) | |
RS422 | 16 RS422 channels; Programmable baud rates: up to 5.5296 Mbps; otherwise as TPMC410 10 above ((TPMC460-11) | |
RS232 8 Channel RS422 | Programmable baud rates: RS232: up to 921.6 kbps, RS422: up to 5.5296 Mbps; Octal UART: Exar XR17D158; I/O Signals of RS232: TxD, RxD, RTS, CTS, GND, I/O Signals of RS422: TxD±, RxD±, GND; 64 byte transmit FIFO per chan, 64 byte receive FIFO per chan, Readable FIFO levels; ESD protected transceiver (up to ±15KV); -40°C to +85°C (TPMC460-12) | |
4 Channel RS422 | 12 RS232 channels and 4 RS422 channels; otherwise as TPMC460-12 above (TPMC460-13) | |
RS232 12 Channel RS422 | 4 RS232 channels and 12 RS422 channels; otherwise as TPMC460-12 above (TPMC460-14) | |
RS232 | Programmable baud rates to 921.6 Kbaud ; RxD, TxD, RTS, CTS, GND per chan; 2 channel with full modem support; 64 byte receive/transmit FIFO per chan, programmable trigger levels for FIFO's; ESD protected; HD50 SCSI-2 type connector and P14 I/O; -40°C to +85°C (TPMC461-10) | |
RS422 | Programmable baud rates to 5.5296 Mbaud; RxD±, TxD± and GND per chan; 2 channel offer RTS±, CTS±; 64 byte receive/transmit FIFO per chann, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector and P14 I/O; -40°C to +85°C (TPMC461-11) | |
RS232/RS422 | Programmable baud rates to 921.6 Kbaud ; RxD, TxD, RTS, CTS, GND per chan; 2 chan with full modem support; 4 RS422 chan; Programmable baud rates to 5.5296 Mbaud; RxD±, TxD± and GND per chan; 64 byte receive/transmit FIFO per chan, programmable trigger levels for FIFOs; ESD protected; HD50 SCSI-2 type front panel connector and P14 I/O; -40°C to +85°C (TPMC461-12) | |
RS232 | Programmable baud rates to 921.6 Kbaud ; RxD, TxD, RTS, CTS, GND per chan; 1 channel with full modem support; 64 byte receive/transmit FIFO per chan, programmable trigger levels for FIFOs; ESD protected; HD50 SCSI-2 type connector and P14 I/O; -40°C to +85°C (TPMC462-10) | |
RS422 | Programmable baud rates to 5.5296 Mbaud; RxD±, TxD± and GND per chan; 1 chan offer RTS±, CTS±; 64 byte receive/transmit FIFO per chan, programmable trigger levels for FIFO's; ESD protected; HD50 SCSI-2 type connector and P14 I/O; -40°C to +85°C (TPMC462-11) | |
RS232/RS422 | Programmable baud rates to 921.6 Kbaud; RxD, TxD, RTS, CTS, GND per chan; 1 chan with full modem support; 2 RS422 chan; Programmable baud rates to 5.5296 Mbaud; RxD±, TxD± and GND per chan; 64 byte receive/transmit FIFO per chan, programmable trigger levels for FIFOs; ESD protected; HD50 SCSI-2 type connector and P14 I/O; -40°C to +85°C (TPMC462-12) | |
RS232 | Programmable baud rates to 921.6 Kbaud ; RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per chan; 64 byte receive/transmit FIFO per chan, programmable trigger levels for FIFO's; ESD protected; 4 RJ45 connector and P14 I/O; -40°C to +85°C (TPMC463-10) | |
RS422 | Programmable baud rates to 5.5296 Mbaud; Support of RxD±, TxD± and GND per chan; 64 byte receive/transmit FIFO per chan, programmable trigger levels for FIFOs; ESD protected RS422 line driver/receiver; 4 RJ45 connector and P14 I/O; -40°C to +85°C (TPMC463-11) | |
RS232/RS422 | Programmable baud rates to 921.6 Kbaud ; RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per chan; 2 RS422 chan; Programmable baud rates to 5.5296 Mbaud; RxD±, TxD± and GND per chan; 64 byte receive/transmit FIFO per chan, programmable trigger levels for FIFOs; ESD protected; 4 RJ45 connector and P14 I/O; -40°C to +85°C (TPMC463-12) | |
RS232 Conduction Cooled | Programmable baud rates to 921.6 Kbaud ; RxD, TxD, RTS, CTS, GND per chan; 2 chan with full modem support; 64 byte receive/transmit FIFO per chan, programmable trigger levels for FIFOs; ESD protected; P14 I/O; -40°C to +85°C (TPMC371-10) | |
RS422 Conduction Cooled | Programmable baud rates to 5.5296 Mbaud; RxD±, TxD± and GND per chan; 2 chan offer RTS±, CTS±; 64 byte receive/transmit FIFO per chan, programmable trigger levels for FIFOs; ESD protected; P14 I/O; -40°C to +85°C (TPMC371-11) | |
RS232/RS422 Conduction Cooled | Programmable baud rates to 921.6 Kbaud ; RxD, TxD, RTS, CTS, GND per chan; 2 chan with full modem support; 4 RS422 chan; Programmable baud rates to 5.5296 Mbaud; RxD±, TxD± and GND per chan; 64 byte receive/transmit FIFO per chan, programmable trigger levels for FIFOs; ESD protected; P14 I/O; -40°C to +85°C (TPMC371-12) | |
RS232 Conduction Cooled | Programmable baud rates to 921.6 Kbaud ; RxD, TxD, RTS, CTS, GND per chan; 1 chan with full modem support; 64 byte receive/transmit FIFO per chan, programmable trigger levels for FIFOs; ESD protected; P14 I/O; -40°C to +85°C (TPMC372-10) | |
RS422 Conduction Cooled | Programmable baud rates to 5.5296 Mbaud; RxD+/-, TxD+/- and GND per chan; 1 chan offer RTS±, CTS±; 64 byte receive/transmit FIFO per chan, programmable trigger levels for FIFOs; ESD protected; P14 I/O; -40°C to +85°C (TPMC372-11) | |
RS232/RS422 Conduction Cooled | Programmable baud rates to 921.6 Kbaud ; RxD, TxD, RTS, CTS, GND per chan; 1 chan with full modem support; 2 RS422 chan; Programmable baud rates to 5.5296 Mbaud; RxD±, TxD± and GND per chan; 64 byte receive/transmit FIFO per chan, programmable trigger levels for FIFOs; ESD protected; P14 I/O; -40°C to +85°C (TPMC372-12) | |
Isolated RS232 | 4 isolated RS232 channels; optically isolated and DC/DC converter on board; Programmable baud rates to 460.8 Kbaud; RxD, TxD, RTS, CTS, GND per chan; 64 byte receive FIFO/ 64 byte transmit FIFO per chan; ESD protected; DB-25 front panel connector and P14 I/O; -40°C to +85°C (TPMC860-10) | |
Isolated RS422/RS485 | 4 isolated RS422/RS485 channels; optically isolated and DC/DC converter on board; RxD±, TxD±, and GND per RS422 chan or Dx± and GND per RS485 chan; 128 byte receive FIFO/128 byte transmit FIFO per chan; ESD protected; DB-25 front panel connector and P14 I/O; -40°C to +85°C (TPMC861-10) | |
RS232 | 8 RS232 channels; Programmable baud rates to 460.8 Kbaud; RxD, TxD, RTS, CTS, GND per chan; 64 byte receive FIFO/64 byte transmit FIFO per chan; ESD protected; HD50 SCSI-2 type front panel connector and P14 I/O; Model No. TPMC866-10 (0°C to +70°C); TPMC866-10-ET (-40°C to +85°C) | |
RS422 | 8 RS422 channels; Programmable baud rates up to 460.8 Kbaud; RxD±, TxD± and GND per chan; 64 byte receive FIFO/64 byte transmit FIFO per chan; ESD protected; HD50 SCSI-2 type front panel connector and P14 I/O; Model No. TPMC866-11 (0°C to +70°C); TPMC866-11-ET (-40°C to +85°C) | |
RS422/RS485 | 8 RS422/RS485 channels; Programmable baud rates to 460.8 Kbaud; RxD±, TxD± and GND per RS422 chan or of Dx± and GND per RS485 chan; 64 byte receive FIFO/64 byte transmit FIFO per chan; ESD protected; HD50 SCSI-2 type front panel connector and P14 I/O; Model No. TPMC866-12 (0°C to +70°C); TPMC866-12-ET (-40°C to +85°C) | |
RS232 | 16 RS232 channels; Programmable baud rates to 460.8 Kbaud; RxD, TxD, RTS, CTS, GND per chan; 64 byte receive FIFO/64 byte transmit FIFO per chan; ESD protected; HD68 SCSI-3 type connector in front panel; Model No. TPMC868-10 (0°C to +70°C); TPMC868-10-ET (-40°C to +85°C) | |
RS422 | 16 RS422 channels; Programmable baud rates to 460.8 Kbaud; RxD±, TxD±, GND per chan; 64 byte receive FIFO/64 byte transmit FIFO per chan; ESD protected; HD68 SCSI-3 type connector in front panel; Model No. TPMC868-11 (0°C to +70°C); TPMC868-11-ET (-40°C to +85°C) | |
Channel RS232 | 4MB SRAM (512K x 32 bit); Onboard Lithium cell or external battery via P14; 4 channel RS232; Programmable baud rates to 115.2 Kbaud; Rx, Tx, RTS, CTS and GND per chan; 64 byte receive FIFO/ 64 byte transmit FIFO per chan; ESD protected; DB-25 front panel connector; 0°C to +70°C (TPMC917-10) |
VMETRO Tel: (281) 584-0728, +47 22 10 60 90
| Function | Description |
|---|---|
| PMC or XMC Module using highly integrated FPGA technology to provide 1, 2 or 4 channesl of fast, low latency point to point Serial FPDP. Model No. SFM |