<title>VMEbus Power Supplies

VMEbus Power Supplies

AITECH DEFENSE SYSTEMS Tel: (888) AITECH-8 (248-3248), (818) 350-6800

Type Voltage/Current Description

Rugged 6U
Power Supply +5V/50A
±12V/2.5A(ea) 300 Watt output with greater than 75% efficiency, 18-36 Volt DC input range, input transient and reverse polarity protection, EMI/RFI input filter, output over-voltage and short-circuit protection, ACFAIL output signal with 4 ms holdup time, input/output and chassis isolation, thermal shutdown, fan control circuit. Model No. P216

Rugged 3U
Power Supply +5V/20A
3.3V/11A
±12V/1.0A(ea) 160 Watt output with greater than 75% efficiency, 18-36 Volt DC input range, input transient and reverse polarity protection, EMI/RFI input filter, output over-voltage and short-circuit protection, optional: ACFAIL, SYSRST and SYSFAIL output signals with holdup time, input/output and chassis isolation, thermal shutdown, remote ON/OFF capability. Model No. P217

6U VME64x
Power Supply +5.0V/30A
±12V/1.25A(ea)
+3.3V /9A Outputs: 250W of 5V, 60W of 3.3V, and ±12 V. Four reference voltage outputs (+2.0, +5.0, ±10.0 Vdc). 250 Watt output VME64x power supply; 18-36 Volt DC input range; 28Vdc input power source per MIL-STD-1275 and MIL-STD-704; input transient and reverse polarity protection; integral EMI/RFI input filter; output over-voltage and short-circuit protection; ACFAIL output signal with 4 ms holdup time; input/output and chassis isolation; thermal shutdown; fan control circuit. Other output voltages available including ±10V, +2V, +5V (Ref). Model No. P220.

6U VME64x
Power Supply +5.0V/30A
+3.3V/12A
±12V/1A(ea) 175 Watt Output with greater than 75% efficiency, 16-36 Volt DC Input Range with drop to 14V for 45 Sec., MIL-STD-704A and D Input compliance, EMI/RFI input filter and input transient protection, Outputs: 5V @ 30A, ±12V @ 1.0A each, 3.3V @ 12A, output over/undervoltage and short-circuit protections, ACFAIL, SYSRST and ~YSFAIL VME output signals, 50 ms Holdup time, input/output and chassis isolation, thermal shutdown and reverse polarity protection, external On/Off control, DC fan output drive and control, internal BIT status and alarms for voltages, currents, and temperatures. Model No. P221

Type	Voltage/Current	Description
Rugged 6U Power Supply	+5V/50A ±12V/2.5A(ea)	300 Watt output with greater than 75% efficiency, 18-36 Volt DC input range, input transient and reverse polarity protection, EMI/RFI input filter, output over-voltage and short-circuit protection, ACFAIL output signal with 4 ms holdup time, input/output and chassis isolation, thermal shutdown, fan control circuit. Model No. P216
Rugged 3U Power Supply	+5V/20A 3.3V/11A ±12V/1.0A(ea)	160 Watt output with greater than 75% efficiency, 18-36 Volt DC input range, input transient and reverse polarity protection, EMI/RFI input filter, output over-voltage and short-circuit protection, optional: ACFAIL, SYSRST and SYSFAIL output signals with holdup time, input/output and chassis isolation, thermal shutdown, remote ON/OFF capability. Model No. P217
6U VME64x Power Supply	+5.0V/30A ±12V/1.25A(ea) +3.3V /9A	Outputs: 250W of 5V, 60W of 3.3V, and ±12 V. Four reference voltage outputs (+2.0, +5.0, ±10.0 Vdc). 250 Watt output VME64x power supply; 18-36 Volt DC input range; 28Vdc input power source per MIL-STD-1275 and MIL-STD-704; input transient and reverse polarity protection; integral EMI/RFI input filter; output over-voltage and short-circuit protection; ACFAIL output signal with 4 ms holdup time; input/output and chassis isolation; thermal shutdown; fan control circuit. Other output voltages available including ±10V, +2V, +5V (Ref). Model No. P220.
6U VME64x Power Supply	+5.0V/30A +3.3V/12A ±12V/1A(ea)	175 Watt Output with greater than 75% efficiency, 16-36 Volt DC Input Range with drop to 14V for 45 Sec., MIL-STD-704A and D Input compliance, EMI/RFI input filter and input transient protection, Outputs: 5V @ 30A, ±12V @ 1.0A each, 3.3V @ 12A, output over/undervoltage and short-circuit protections, ACFAIL, SYSRST and ~YSFAIL VME output signals, 50 ms Holdup time, input/output and chassis isolation, thermal shutdown and reverse polarity protection, external On/Off control, DC fan output drive and control, internal BIT status and alarms for voltages, currents, and temperatures. Model No. P221

ELMA ELECTRONIC Tel: (510) 656-3400

Type Voltage/Current Description

Plug-in
Power
Supply +5V/4A, +12V/2A, -12V/1A 45W, 3U/6HP (P/N 69-E45-2)

. +5V/6A, +12V/3A, -12V/1A 60W, 3U/8HP (P/N 69-E60-2)

. +5V/10A, +12V/6A 100W, 3U/10HP (P/N 69-E100-3)

. +5V/15A, +12V/2A, -12V/2A 150W, 3U/16HP (P/N 69-900-32)

. +5V/20A, +12V/2A, -12V/2A 180W, 3U/16HP (P/N 69-900-33)

. +5V/20A, -5V/4A, +24V/4A, ±12V/4A 200W, 6U/12HP (P/N 69-C200-3)

. +5V/25A, ±12V/6A 250W, 6U/12HP (P/N 69-E250-3)

. +5V/40A, ±12V/6A 300W, 6U/12HP (P/N 69-E300-3)

. +5V/68A, +12V/8A, -12V/72A 400W, 6U/20HP (P/N 69-P400-3)

Open
Frame
Power
Supply +5V/40A, -5V/10A, +12V/3A, -12V/1A 100W, 3.80 in. x1 in. x6.80 in. (P/N 69-PD-US100-401)

. +5V/20A, -5V/5A, +12V/4A, -12V/1A 150W, 3.80 in. x1.50 in. x6.80 in. (P/N 69-PD-US150-401)

. +5V/25A, -5V/2.5A, +12V/5A, -12V/2.5A 200W, 4.50 in. x2 in. x8 in. (P/N 69-PD-D200-401)

. +5V/40A, +12V/2.5A, -12V/6A 250W, 4.25 in. x2.5 in. x10 in. (P/N 69-C250-QP2)

. +5V/50A, -5V/2A, +12V/8A, -12V/4A 350W, 9.00 in. x5.00 in. x2.5 in. (P/N 69-T350-1205)

. +5V/50A, -5V/5A, +12V/6A, -12V/5A 400W, 11.5 in. x5.0 in. x2.5 in. (P/N 69-T400-1205)

. +5V/80A, -5V/8A, +12V/8A, -12V/6A 500W, 4.37 in. x4.12 in. x11.0 in. (P/N 69-C500-QD4)

. +5V/80A, -5V/2A, +12V/10A, -12V10A 500W, 11.50 in. x5.0 in. x2.5 in. (P/N 69-T500-1205)

. +5V/120A, -5V/8A, +12V/12A, -12V/12A 750W, 5.9 in. x5.0 in. x11.0 in., (P/N 69-C750-QD5)

Type	Voltage/Current	Description
Plug-in Power Supply	+5V/4A, +12V/2A, -12V/1A	45W, 3U/6HP (P/N 69-E45-2)
.	+5V/6A, +12V/3A, -12V/1A	60W, 3U/8HP (P/N 69-E60-2)
.	+5V/10A, +12V/6A	100W, 3U/10HP (P/N 69-E100-3)
.	+5V/15A, +12V/2A, -12V/2A	150W, 3U/16HP (P/N 69-900-32)
.	+5V/20A, +12V/2A, -12V/2A	180W, 3U/16HP (P/N 69-900-33)
.	+5V/20A, -5V/4A, +24V/4A, ±12V/4A	200W, 6U/12HP (P/N 69-C200-3)
.	+5V/25A, ±12V/6A	250W, 6U/12HP (P/N 69-E250-3)
.	+5V/40A, ±12V/6A	300W, 6U/12HP (P/N 69-E300-3)
.	+5V/68A, +12V/8A, -12V/72A	400W, 6U/20HP (P/N 69-P400-3)
Open Frame Power Supply	+5V/40A, -5V/10A, +12V/3A, -12V/1A	100W, 3.80 in. x1 in. x6.80 in. (P/N 69-PD-US100-401)
.	+5V/20A, -5V/5A, +12V/4A, -12V/1A	150W, 3.80 in. x1.50 in. x6.80 in. (P/N 69-PD-US150-401)
.	+5V/25A, -5V/2.5A, +12V/5A, -12V/2.5A	200W, 4.50 in. x2 in. x8 in. (P/N 69-PD-D200-401)
.	+5V/40A, +12V/2.5A, -12V/6A	250W, 4.25 in. x2.5 in. x10 in. (P/N 69-C250-QP2)
.	+5V/50A, -5V/2A, +12V/8A, -12V/4A	350W, 9.00 in. x5.00 in. x2.5 in. (P/N 69-T350-1205)
.	+5V/50A, -5V/5A, +12V/6A, -12V/5A	400W, 11.5 in. x5.0 in. x2.5 in. (P/N 69-T400-1205)
.	+5V/80A, -5V/8A, +12V/8A, -12V/6A	500W, 4.37 in. x4.12 in. x11.0 in. (P/N 69-C500-QD4)
.	+5V/80A, -5V/2A, +12V/10A, -12V10A	500W, 11.50 in. x5.0 in. x2.5 in. (P/N 69-T500-1205)
.	+5V/120A, -5V/8A, +12V/12A, -12V/12A	750W, 5.9 in. x5.0 in. x11.0 in., (P/N 69-C750-QD5)

KONTRON MODULAR COMPUTERS Tel: +49-8341-803-0

Type Voltage/Current Description

Plug In
Power
Supplies 5V/8-20A
+12V/1-5A
12V/0.5-2A Power range from 50-180W; standard H15 pinout to fit directly in the backplane VBP4A; ACFAIL/SYSRESET signals; sense line; temperature range 0-70°C (P/N SVE-MxxxAC)

Type	Voltage/Current	Description
Plug In Power Supplies	5V/8-20A +12V/1-5A 12V/0.5-2A	Power range from 50-180W; standard H15 pinout to fit directly in the backplane VBP4A; ACFAIL/SYSRESET signals; sense line; temperature range 0-70°C (P/N SVE-MxxxAC)

NORTH ATLANTIC INDUSTRIES Tel: (631) 567-1100

Type Voltage/Current Description

Chassis
Mount +5V/30A,
+12V/4A
12V/4A
+3.3V/12 A 500 Watts, Ruggedized, High Power density, low profile VME/VXI power supply which accepts both 270 Vdc and a 115/230 Vac single phase input. Ideally suited for airborne, shipboard and ground mobile applications. EMI filtering to meet MIL-STD-461D, designed and manufactured Per NAVMAT Guidelines and transient protection per MIL-STD-704D. Model No. 57S81

Chassis
Mount +5/24A
+12V/5A
12V/2A
+15V/1.5A
15V/1.5A 250 watts, Ruggedized, High Power density, low profile VME/VXI power supply which accepts 115/ Vac three phase 400 Hz input. Switching Power Supply – Low Noise. Hold-up time 5 mS from 108 Vac input level. Inrush current 10 Amps max. Short Circuit protection - protected for continuous short circuit with automatic recovery. Model No. 56P51

VME Power
Conversion +5V/30A
+12V/4A
-12V/4A
+3.3V/30A VME and General Purpose Power Supply designed to fit within Standard 6U VME Rack. 430 Watts, 115VAC, Single Phase Input, Five Outputs. High Power, Low Profile Power Supply. Model No. 56SQ1

VME Power
Conversion +5V/65A
+12V/8A
-12V/4A
+3.3V/30A VME and General Purpose Power Supply. 600 Watts, 115VAC, Single Phase Input, Five Outputs. This High Power, Low Profile Power Supply is ideally suited for Shipboard Applications. Model No. 56ST1

VXI/VME
Power
Conversion +3.3V/15A
+5V/15A
+12V/2A
-12V/2A 28 V in DC/DC Converter. 200 Watt Quad Output. Plus 5 volt Standby supports VME and cPCI applications. Model No. 55PQ1

Pluggable
Power
Supply +5/30A
+12V/4A
-12V/4A
+3.3V/20A
+24V/2A (opt)
+28V/2A (opt) 350 Watts, Ruggedized, High Power density, low profile VME/VXI power supply which accepts 28 Vdc input. Switching Power Supply – Low Noise. Ideally suited for airborne, shipboard and ground mobile applications. EMI filtering to meet MIL-STD-461D, designed and manufactured Per NAVMAT Guidelines and transient protection per MIL-STD-704D. Model No. 55RQ

Type	Voltage/Current	Description
Chassis Mount	+5V/30A, +12V/4A 12V/4A +3.3V/12 A	500 Watts, Ruggedized, High Power density, low profile VME/VXI power supply which accepts both 270 Vdc and a 115/230 Vac single phase input. Ideally suited for airborne, shipboard and ground mobile applications. EMI filtering to meet MIL-STD-461D, designed and manufactured Per NAVMAT Guidelines and transient protection per MIL-STD-704D. Model No. 57S81
Chassis Mount	+5/24A +12V/5A 12V/2A +15V/1.5A 15V/1.5A	250 watts, Ruggedized, High Power density, low profile VME/VXI power supply which accepts 115/ Vac three phase 400 Hz input. Switching Power Supply – Low Noise. Hold-up time 5 mS from 108 Vac input level. Inrush current 10 Amps max. Short Circuit protection - protected for continuous short circuit with automatic recovery. Model No. 56P51
VME Power Conversion	+5V/30A +12V/4A -12V/4A +3.3V/30A	VME and General Purpose Power Supply designed to fit within Standard 6U VME Rack. 430 Watts, 115VAC, Single Phase Input, Five Outputs. High Power, Low Profile Power Supply. Model No. 56SQ1
VME Power Conversion	+5V/65A +12V/8A -12V/4A +3.3V/30A	VME and General Purpose Power Supply. 600 Watts, 115VAC, Single Phase Input, Five Outputs. This High Power, Low Profile Power Supply is ideally suited for Shipboard Applications. Model No. 56ST1
VXI/VME Power Conversion	+3.3V/15A +5V/15A +12V/2A -12V/2A	28 V in DC/DC Converter. 200 Watt Quad Output. Plus 5 volt Standby supports VME and cPCI applications. Model No. 55PQ1
Pluggable Power Supply	+5/30A +12V/4A -12V/4A +3.3V/20A +24V/2A (opt) +28V/2A (opt)	350 Watts, Ruggedized, High Power density, low profile VME/VXI power supply which accepts 28 Vdc input. Switching Power Supply – Low Noise. Ideally suited for airborne, shipboard and ground mobile applications. EMI filtering to meet MIL-STD-461D, designed and manufactured Per NAVMAT Guidelines and transient protection per MIL-STD-704D. Model No. 55RQ

PASCALL ELECTRONICS Tel: +44 (0) 1983 817300

Type Voltage/Current Description

Ruggedised
6U Format 5V/40A
3.3V/5A
12V/2A
-12V/2A 260 Watts output power with better than 70% efficiency. 115 Volts 400 Hz AC input (single & 3-phase). MIL-STD 704E input conditions and EMI to MIL STD 461C. ACFAIL, SYSRESET output signals with 4mS holdup. Conduction cooled -55 deg C to +85 deg C. Model No. VM-10859

Ruggedised
6U Format 5V/40A
3.3V/5A
12V/2A
-12V/2A 260 Watts output power with better than 70% efficiency. 115 Volts 400 Hz AC input (single & 3-phase). ACFAIL, SYSRESET output signals with 4mS holdup. Conduction cooled -55 deg C to +85 deg C. Model No. VM-10861

Ruggedised
6U Format 5V/40A
12V/2A
-12V/2A 260 Watts output power with better than 70% efficiency. 115 Volts 400Hz AC input (single & 3 phase). MIL-STD 704E input conditions and EMI to MIL STD 461C. ACFAIL, SYSRESET output signals. 4mS holdup. Convection cooled -40 deg C to +85 deg C.operating temperature. Model No. VM-10860

Ruggedised
6U Format
Single Slot 5V/30A
3.3V/10A
12V/2.5A
-12V/2.5A
5V/0.1A 260 Watts output power with better than 80% efficiency. 28 Volts DC input to MIL-STD 704E and EMI to MIL STD 461D. ACFAIL, SYSRESET output signals. 4mS holdup. Conduction cooled. -55 deg C to +85 deg C operating temperature. Model No. VM-10641

Ruggedised
6U Format
Single Slot 5V/30A
3.3V/10A
12V/2.5A
-12V/2.5A
5V/0.1A 260 Watts output power with better than 80% efficiency. 115 Volts 400Hz AC single phase to MIL-STD 704E with EMI to MIL STD 461D. ACFAIL, SYSRESET output signals. 4mS holdup. Conduction cooled. -55 deg C to +85 deg C.operating temperature. Model No. VM-10822

Ruggedised
3/4 ATR
Format 5V/24A
12V/1.5A
-12V/1.5A
5V/0.5A 160 Watt output power supply with better than 70% efficiency. 115 Volts 3 phase 400Hz input to MIL-STD 704E with EMI to MIL-STD 461C. ACFAIL, SYSRESET output signals. 4mS holdup. Conduction cooled. -55 deg C to +85 deg C.operating temperature. Model No. VM-10862

Ruggedised
3/4 ATR
Format 5V/24A
12V/1.5A
-12V/1.5A
5V/0.5A 160 Watt output power supply with better than 70% efficiency. 28 Volts DC input to MIL-STD 704E with EMI to MIL-STD 461C. ACFAIL, SYSRESET output signals. 4mS holdup. Conduction cooled. -55 deg C to +85 deg C.operating temperature. Model No. VM-10863

Ruggedised
1/2 ATR
Format 5V/18A
12V/1.2A
-12V/1.2A 120 Watt output power supply with better than 70% efficiency. 115 Volts single phase 400Hz input to MIL-STD 704E with EMI to MIL STD 461C. Operating temperature range -55 deg C to +100 deg C baseplate. Model No. 1-10864

1/2 ATR
Format 5V/18A
12V/1.2A
-12V/1.2A 120 Watt output dc/dc converter with better than 70% efficiency. 28 Volts DC input to MIL-STD 704E and EMI to MIL-STD 461C. Operating temperature range -55 deg C to +100 deg C baseplate. Model No. 1-10865

Type	Voltage/Current	Description
Ruggedised 6U Format	5V/40A 3.3V/5A 12V/2A -12V/2A	260 Watts output power with better than 70% efficiency. 115 Volts 400 Hz AC input (single & 3-phase). MIL-STD 704E input conditions and EMI to MIL STD 461C. ACFAIL, SYSRESET output signals with 4mS holdup. Conduction cooled -55 deg C to +85 deg C. Model No. VM-10859
Ruggedised 6U Format	5V/40A 3.3V/5A 12V/2A -12V/2A	260 Watts output power with better than 70% efficiency. 115 Volts 400 Hz AC input (single & 3-phase). ACFAIL, SYSRESET output signals with 4mS holdup. Conduction cooled -55 deg C to +85 deg C. Model No. VM-10861
Ruggedised 6U Format	5V/40A 12V/2A -12V/2A	260 Watts output power with better than 70% efficiency. 115 Volts 400Hz AC input (single & 3 phase). MIL-STD 704E input conditions and EMI to MIL STD 461C. ACFAIL, SYSRESET output signals. 4mS holdup. Convection cooled -40 deg C to +85 deg C.operating temperature. Model No. VM-10860
Ruggedised 6U Format Single Slot	5V/30A 3.3V/10A 12V/2.5A -12V/2.5A 5V/0.1A	260 Watts output power with better than 80% efficiency. 28 Volts DC input to MIL-STD 704E and EMI to MIL STD 461D. ACFAIL, SYSRESET output signals. 4mS holdup. Conduction cooled. -55 deg C to +85 deg C operating temperature. Model No. VM-10641
Ruggedised 6U Format Single Slot	5V/30A 3.3V/10A 12V/2.5A -12V/2.5A 5V/0.1A	260 Watts output power with better than 80% efficiency. 115 Volts 400Hz AC single phase to MIL-STD 704E with EMI to MIL STD 461D. ACFAIL, SYSRESET output signals. 4mS holdup. Conduction cooled. -55 deg C to +85 deg C.operating temperature. Model No. VM-10822
Ruggedised 3/4 ATR Format	5V/24A 12V/1.5A -12V/1.5A 5V/0.5A	160 Watt output power supply with better than 70% efficiency. 115 Volts 3 phase 400Hz input to MIL-STD 704E with EMI to MIL-STD 461C. ACFAIL, SYSRESET output signals. 4mS holdup. Conduction cooled. -55 deg C to +85 deg C.operating temperature. Model No. VM-10862
Ruggedised 3/4 ATR Format	5V/24A 12V/1.5A -12V/1.5A 5V/0.5A	160 Watt output power supply with better than 70% efficiency. 28 Volts DC input to MIL-STD 704E with EMI to MIL-STD 461C. ACFAIL, SYSRESET output signals. 4mS holdup. Conduction cooled. -55 deg C to +85 deg C.operating temperature. Model No. VM-10863
Ruggedised 1/2 ATR Format	5V/18A 12V/1.2A -12V/1.2A	120 Watt output power supply with better than 70% efficiency. 115 Volts single phase 400Hz input to MIL-STD 704E with EMI to MIL STD 461C. Operating temperature range -55 deg C to +100 deg C baseplate. Model No. 1-10864
1/2 ATR Format	5V/18A 12V/1.2A -12V/1.2A	120 Watt output dc/dc converter with better than 70% efficiency. 28 Volts DC input to MIL-STD 704E and EMI to MIL-STD 461C. Operating temperature range -55 deg C to +100 deg C baseplate. Model No. 1-10865

VMIC Tel: (256) 880-0444, (800) 322-3616

Type Voltage/Current Description

Power Supplies ±5, ±12 or ±15 VDC Units meet one or both FCC 200780, part 15, class A and VDE 0871/6.78, class A for cond emissions. Internal modules meet one or more of UL 478, CSA 22.2, IEC 380, IEC 435, VDE 0804, VDE 0806 (P/N VMIVME-PSX-ABC)

Type	Voltage/Current	Description
Power Supplies	±5, ±12 or ±15 VDC	Units meet one or both FCC 200780, part 15, class A and VDE 0871/6.78, class A for cond emissions. Internal modules meet one or more of UL 478, CSA 22.2, IEC 380, IEC 435, VDE 0804, VDE 0806 (P/N VMIVME-PSX-ABC)

Return To Product Directory Index / Return To VME Directory Main Page