VMEbus Prototyping Boards

CARLO GAVAZZI COMPUTING SOLUTIONS Tel: (508) 588-6110

Size	Description	Bus Interface
233.4 x 160mm/220mm 366.7 x 220mm/280mm/400mm	4 layer Schottky, HDU/PGA,HVU with ejectors, 3 level G/G (P/N 20XXX11)	.
6U x 160mm	System test board with load resistors, with or without digital displays (P/N 4101800/850)	.

DAWN VME PRODUCTS Tel: (800) 258-DAWN

Size	Description	Bus Interface
6Ux160mm	0.1" pin grid array. 041" (±003") component hole size. High current 5VDC and ground grids. Power for front panel. P/N: 06-1010044	VME64x
6Ux220mm	Same as above, with a 6Ux220mm form factor. P/N: 06-1010817	VME64x
6Ux160mm	Low impedance window screened power and ground distribution. Low noise/high performance. Accepts 80, 20-pin DIP's directly, or 90, 16-pin IC equivalents. Board supplied with wirewrap J1/J2 connectors. P/N: 06-300029	VME
6Ux160mm	As above, except set up to accommodate PGA IC's. Entire board is a continuous grid of holes, spaced as .100 inches. P/N: 06-1001009	VME
6Ux220mm	As above, except at 220mm, with capacity of 120, 20-pin DIP's, or 135, 16-pin IC equivalents. P/N: 06-300055	VME
6Ux400mm	As above, except at 400mm, with capacity of 219, 20-pin DIP's, or 302, 16-pin IC equivalents. P/N: 06-300022	VME
9Ux 400mm	Similar to above, accepts total of 403, 20-pin devices directly, or 489, 16-pin IC equivalents. Accommodates leadless carrier, or pin grid devices. P/N: 06-300066	.

HYBRICON Tel: (978) 772-5422

Size	Description	Bus Interface
3U/6U/9U x 160/220/280/400mm	Wirewrap, ultra high density, very high frequency, with PGA area	.