Vi-ta [vee-tuh]

Critical Embedded Systems
are everywhere . . .

Become a leader in setting new directions!


only search VITA site

Call for Participation

  • Thursday, August 20, 2020 10:19 AM | Jerry Gipper (Administrator)

    Closing Date: Thu, Sep 3 2020 11:59 pm PDT

    Description: Under ANSI rules every 5 years an approved standard must be reaffirmed, revised, or withdrawn. There have been no requests for revision or errata for these the standards in question, hence it is recommended that it be put forth for reaffirmation.

    Voter registration for voting for ANSI recognition of the following standard(s) for Reaffirmation process is now open:

    Title: ANSI/VITA 49.0-2015, VITA Radio Transport (VRT) Standard

    Abstract: The VITA Radio Transport (VRT) standard defines a transport-layer protocol designed to promote interoperability between RF (radio frequency) receivers and signal processing equipment in a wide range of applications. These include spectral monitoring, communications, radar, and others. In support of this variety of applications, the VRT protocol provides a variety of formatting options that allow the transport layer to be optimized for each application. VRT also enables high-precision timestamping to provide time synchronization between multiple receiver channels.

    Title: ANSI/VITA 49.1-2015, VITA Radio Link Layer Standard

    Abstract: This document describes an open standard for an optional encapsulation protocol for VITA-49.0 (VRT) packets.

    Title: ANSI/VITA 49A-2015, Spectrum Survey Interoperability Specification

    Abstract: This document specifies an interoperability specification that is applicable to spectrum-survey applications. It is intended to foster high-throughput and adaptable processing in a large-scale environment. It specifically considers the needs of devices based around 32-/64-bit general-purpose processors (GPP) and FPGAs that utilize Internet Protocol (IP) as the underlying transport between processing devices.

    This ballot is open to both VITA members and non-members alike. You must register if you wish to participate in the ballots. Non-members should contact Jing Kwok, VITA Technical Director, for login credentials.

    The roster will be vetted to ensure it meets balance, lack of dominance and openness rules. Following which a formal ballot will be sent to the registrants for voting.

    Please register ONLY IF you intend to vote.

    The ANSI Function can be found on the VITA governance page (http://www.vita.com/Governance)

  • Thursday, August 20, 2020 10:13 AM | Jerry Gipper (Administrator)

    Closing Date: Thu, Sep 3 2020 11:59 pm PDT

    Description: Under ANSI rules every 5 years an approved standard must be reaffirmed, revised, or withdrawn. There have been no requests for revision or errata for these the standards in question, hence it is recommended that it be put forth for reaffirmation.

    Voter registration for voting for ANSI recognition of the following standard(s) for Reaffirmation process is now open:

    Title: ANSI/VITA 63.0-2015, Hyperboloid Alternative Connector for VPX

    Abstract: This document describes an open standard for VITA 63.0 Hyperboloid Alternative Connector for VPX. This standard provides an alternative connector to the one specified in the VITA 46.0 VPX Baseline Standard. Because the 46.0 and the 63.0 connectors are not intermateable, a VITA 63.0 module will not plug into a VITA 46.0 backplane and vice versa. However, the VITA 63.0 draft standard provides VPX users with the flexibility to choose a VPX module and backplane connector combination for their specific application requirements.

    This ballot is open to both VITA members and non-members alike. You must register if you wish to participate in the ballots. Non-members should contact Jing Kwok, VITA Technical Director, for login credentials.

    The roster will be vetted to ensure it meets balance, lack of dominance and openness rules. Following which a formal ballot will be sent to the registrants for voting.

    Please register ONLY IF you intend to vote.

    The ANSI Function can be found on the VITA governance page (http://www.vita.com/Governance)

  • Thursday, August 20, 2020 9:21 AM | Jerry Gipper (Administrator)

    Closing Date: Thu, Sep 3 2020 11:59 pm PDT

    Description: Under ANSI rules every 5 years an approved standard must be reaffirmed, revised, or withdrawn. There have been no requests for revision or errata for these the standards in question, hence it is recommended that it be put forth for reaffirmation.

    Voter registration for voting for ANSI recognition of the following standard(s) for Reaffirmation process is now open:

    Title: ANSI/VITA 17.1-2015, Serial Front Panel Data Port

    Abstract: This document describes an open standard for “Serial FPDP”, a high-speed low-latency serial communications protocol for use in high-speed data transfer applications, typically using a fiber optic link. As the name implies, it is directly related to Standard Front Panel Data Port (FPDP), deriving its serial protocol from the defined protocol and control signals of FPDP. This Serial FPDP standard supports seven link speeds: 1.0625 Gbaud, 2.125, 2.5, 4.25, 5.0, 8.5, and 10.0 Gbaud. These seven link speeds can support data transfer rates in excess of 105 MBps, 210 MBps, 247 MBps, 420 MBps, 494 MBps, 840 MBps, and 988 MBps respectively.

    This ballot is open to both VITA members and non-members alike. You must register if you wish to participate in the ballots. Non-members should contact Jing Kwok, VITA Technical Director, for login credentials.

    The roster will be vetted to ensure it meets balance, lack of dominance and openness rules. Following which a formal ballot will be sent to the registrants for voting.

    Please register ONLY IF you intend to vote.

    The ANSI Function can be found on the VITA governance page (http://www.vita.com/Governance)

  • Thursday, February 20, 2020 3:16 PM | Jerry Gipper (Administrator)

    Closing Date: Mon, Mar 9 2020 11:59 pm PDT

    Description:  The VITA 67.3 working group has completed the draft and has voted to take the draft through to the ANSI process to be recognized as a new ANSI standard.

    Voter registration for voting for ANSI recognition of the draft standard is now open.

    VITA 67.3, VPX: Coaxial Interconnect on VPX, Spring-Loaded Contact on Backplane

    Abstract:  This document describes an open standard for configuration and interconnect within the structure of VITA 67.0 enabling an interface compatible with VITA 46 containing multi-position blind mate analog connectors with SMPM style contacts having fixed contacts on the Plug-In Module and spring action on the backplane. This revision adds higher density and alternate interfaces while maintaining the VITA 67.3 standard backplane cutouts and positions.

    This ballot is open to both VITA members and non-members alike. You must register if you wish to participate in the ballots. Non-members should contact Jing Kwok, VITA Technical Director, for login credentials.

    The roster will be vetted to ensure it meets balance, lack of dominance and openness rules. Following which a formal ballot will be sent to the registrants for voting.

    Please register ONLY IF you intend to vote.

    The ANSI Function can be found on the VITA governance page (http://www.vita.com/Governance)


  • Thursday, February 20, 2020 3:07 PM | Jerry Gipper (Administrator)

    Closing Date: Mon, Mar 9 2020 11:59 pm PDT

    Description:  The VITA 42.3 working group has completed the draft and has voted to take the draft through to the ANSI process to be recognized as a new ANSI standard.

    Voter registration for voting for ANSI recognition of the draft standard is now open.

    VITA 42.3, XMC, PCI Express Protocol Layer Standard

    Abstract:  The VITA 42.3 PCI Express Protocol Layer Standard describes a method for implementing PCI Express on the VITA 42.0 XMC mezzanine form factor.

    This ballot is open to both VITA members and non-members alike. You must register if you wish to participate in the ballots. Non-members should contact Jing Kwok, VITA Technical Director, for login credentials.

    The roster will be vetted to ensure it meets balance, lack of dominance and openness rules. Following which a formal ballot will be sent to the registrants for voting.

    Please register ONLY IF you intend to vote.

    The ANSI Function can be found on the VITA governance page (http://www.vita.com/Governance)

  • Thursday, February 20, 2020 2:52 PM | Jerry Gipper (Administrator)

    Closing Date: Mon, Mar 9 2020 11:59 pm PDT

    Description:  The VITA 62.2 working group has completed the draft and has voted to take the draft through to the ANSI process to be recognized as a new ANSI standard.

    Voter registration for voting for ANSI recognition of the draft standard is now open.

    VITA 62.2, Modular Power Supply Standard for 270v Applications

    Abstract: This standard provides requirements for building a 270 volt/3U or 6U class power supply module that can be used to power a VPX chassis in the VITA 62 family of standards in high altitude applications. The module will fit within the standard envelope defined for VPX modules in the VITA 48.0 standards.

    This ballot is open to both VITA members and non-members alike. You must register if you wish to participate in the ballots. Non-members should contact Jing Kwok, VITA Technical Director, for login credentials.

    The roster will be vetted to ensure it meets balance, lack of dominance and openness rules. Following which a formal ballot will be sent to the registrants for voting.

    Please register ONLY IF you intend to vote.

    The ANSI Function can be found on the VITA governance page (http://www.vita.com/Governance)

  • Thursday, February 20, 2020 2:42 PM | Jerry Gipper (Administrator)

    Closing Date: Mon, Mar 9 2020 11:59 pm PDT

    Description: The VITA 46.30 working group has completed the draft and has voted to take the draft through to the ANSI process to be recognized as a new/revised ANSI standard.

    Voter registration for voting for ANSI recognition of the draft standard is now open.

    VITA 46.30, Higher Data Rate VPX

    Abstract: VITA 46.30 defines a standard for a VPX connector that supports higher data rates, to at least 25 Gbaud - for protocols such as 100GBASE-KR4 Ethernet and PCIe Gen 4. The higher data rate connectors compliant to VITA 46.30 are intermateable to legacy VITA 46.0 connectors and follow the same form factor.

    This ballot is open to both VITA members and non-members alike. You must register if you wish to participate in the ballots. Non-members should contact Jing Kwok, VITA Technical Director, for login credentials.

    The roster will be vetted to ensure it meets balance, lack of dominance and openness rules. Following which a formal ballot will be sent to the registrants for voting.

    Please register ONLY IF you intend to vote.

    The ANSI Function can be found on the VITA governance page (http://www.vita.com/Governance)


  • Wednesday, November 27, 2019 12:31 PM | Jerry Gipper (Administrator)

    Closing Date: Tue, Dec 10 2019 11:59 pm PST

    Description
    : Under ANSI rules after 5 years of a standard being reaffirmed, a standard may enter a 10 year stabilized maintenance period. There have been no requests for revision or errata for this standard in question, hence it is recommended that it be maintained in stabilized maintenance mode.

    Voter registration for voting for ANSI recognition of the following standards for the stabilized maintenance (SM) process is now open :

    Title: ANSI/VITA 58.0-2009 (R2014), Line Replaceable Integrated Electronics Chassis Standard

    Abstract
    This standard provides common design and performance requirements for a family of integrated electronic chassis incorporating updated industry standard high speed electronic assemblies and designed for rugged environments.

    This ballot is open to both VITA members and non-members alike. You must register if you wish to participate in the ballots. Non-members should contact Jing Kwok, VITA Technical Director, for login credentials.

    The roster will be vetted to ensure it meets balance, lack of dominance and openness rules. Following which a formal ballot will be sent to the registrants for voting.

    Please register ONLY IF you intend to vote.

    The ANSI Function can be found on the VITA governance page (http://www.vita.com/Governance)


  • Wednesday, November 27, 2019 12:26 PM | Jerry Gipper (Administrator)

    Closing Date: Tue, Dec 10 2019 11:59 pm PST

    Description
    : Under ANSI rules after 5 years of a standard being reaffirmed, a standard may enter a 10 year stabilized maintenance period. There have been no requests for revision or errata for this standard in question, hence it is recommended that it be maintained in stabilized maintenance mode.

    Voter registration for voting for ANSI recognition of the following standards for the stabilized maintenance (SM) process is now open:

    Title: ANSI/VITA 30.1-2008 (R2014), 2mm Connector Practice on Conduction Cooled Euroboards

    Abstract
    Mechanical characteristics of conduction cooled versions of Euroboard-based circuit card assemblies are described herein. This specification is applicable to, but not limited to, the CompactPCI bus standard, an internal interconnect (backplane) bus intended for connecting individual processing, memory, communications and I/O elements to additional resources. The aim is to ensure mechanical interchangeability of conduction-cooled circuit card assemblies in a format suitable for military and rugged applications and to ensure their compatibility with both conduction cooled chassis and commercial, air-cooled, single height (3U) and double-height (6U) x 160mm, Euroboard chassis.

    This ballot is open to both VITA members and non-members alike. You must register if you wish to participate in the ballots. Non-members should contact Jing Kwok, VITA Technical Director, for login credentials.

    The roster will be vetted to ensure it meets balance, lack of dominance and openness rules. Following which a formal ballot will be sent to the registrants for voting.

    Please register ONLY IF you intend to vote.

    The ANSI Function can be found on the VITA governance page (http://www.vita.com/Governance)

  • Wednesday, November 27, 2019 11:56 AM | Jerry Gipper (Administrator)

    Closing Date: Tue, Dec 10 2019 11:59 pm PST

    Voter registration for voting for ANSI recognition of the following standard(s) for Reaffirmation process is now open.

    Description: Under ANSI rules every 5 years an approved standard must be reaffirmed, revised, or withdrawn.  There have been no requests for revision or errata for these the standards in question, hence it is recommended that it be put forth for reaffirmation.

    Title: ANSI/VITA 48.7-2014, Mechanical Standard for Electronic Plug-in Units using Air Flow-by Cooling Technology

    Abstract: VITA 48.7 defines a detailed mechanical implementation for Air Flow-By cooling and sealing technologies applied to plug-in modules, backplanes, and sub-racks as defined in VITA 46/48. Air Flow-By cooling seals, environmentally and EMI, the PCBA within heat exchanging covers, convectively cooling the assembly without exposing the PCBA to the cooling air.

    This ballot is open to both VITA members and non-members alike. You must register if you wish to participate in the ballots. Non-members should contact Jing Kwok, VITA Technical Director, for login credentials.

    The roster will be vetted to ensure it meets balance, lack of dominance and openness rules. Following which a formal ballot will be sent to the registrants for voting.

    Please register ONLY IF you intend to vote.

    The ANSI Function can be found on the VITA governance page (http://www.vita.com/Governance)

Copyright © 1996-, VITA. All rights reserved.
VITA Copyright and Use Notice
VITA Privacy Policy


only search VITA site
Powered by Wild Apricot Membership Software